List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare stage area | 1.1 Refer to stage plan and consult with supervisor to obtain details of work requirements 1.2 Clear and clean stage area in preparation for staging installation 1.3 Mark out stage according to stage plan and directions from supervisor 1.4 Work cooperatively with crews from other departments when sharing the stage |
2. Lay up floor and position set pieces | 2.1 Lay up floor according to stage plan and directions from supervisor 2.2 Move and assemble set pieces according to stage plan and directions from supervisor 2.3 Follow safety procedures when laying up floor and positioning set pieces 2.4 Identify adjustments required in consultation with relevant personnel and take appropriate action |
3. Finalise activities | 3.1 Clean up and clear surrounding areas to ensure safe work space for all personnel 3.2 Seek feedback on own work performance and note areas for improvement |
Evidence of the ability to:
install flooring and basic set pieces for at least two productions
apply knowledge of the roles and functions of staging departments, staging personnel and staging terminology to work activities
follow instructions and safety procedures
work collaboratively.
Note: If a specific volume or frequency is not stated, then evidence must be provided for each of the above points at least once.
To complete the unit requirements the individual must:
describe the role of staging personnel and how they relate to other production personnel
in the context of interpreting stage plans, indicate on a stage diagram, where the following positions are:
downstage and upstage
onstage and offstage
opposite prompt (OP)
prompt side (PS)
scenery dock
stage right and stage left
describe the main safety issues associated with the use of common stage machinery and equipment
describe or demonstrate the following aspects of assembling set pieces:
lashing/toggling and pinhinging flats together
running and floating a flat
using tech screws and bolts
describe or demonstrate how to tie the following soft scenery set pieces:
borders
cycloramas
gauzes
legs
scrims
describe or demonstrate how to tie the following knots used to assemble set pieces:
bowline
clove
figure-eight knot (single and double)
half-hitch
hitch
overhand knot
reef knot
rolling hitch
truckie’s hitch
whippings and rope seizing
describe how health and safety requirements apply to staging operations and the handling of hazardous substances.
Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in creative arts industry environments. The assessment environment must include access to:
staging machinery, equipment and tools
a venue in which a production is being staged.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.