Assessor Resource

DEFCA411B
Operate a grenade launcher

Assessment tool

Version 1.0
Issue Date: April 2024


This competency was developed for combat arms personnel required to operate a grenade launcher in a deployed operational environment but is applicable to any individual in this field of work.

The individual will be under supervision, usually as part of a team and will usually operate under direct orders.

All activities are carried out in accordance with relevant organisational policies and procedures.

This unit covers the competency required to operate a grenade launcher.

Operating a grenade launcher involves the ability to safely handle, safely maintain, safely operate and safely fire the grenade launcher.

The grenade launcher fires a grenade designed to be used against area and point targets. The weapon is carried by one person and can be fired from normal small arms firing positions.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication. In a Defence context, this means that there is no civilian need to hold this unit in order to meet licensing, legislative, regulatory or certification requirements.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to:

conduct all weapon drills as listed in the Range Statement

fire the weapon

act as part of a team

recognise the limit of own authority

Assessment must also confirm that operators meet the specified minimum requirements as laid down by the relevant Service Chief.

Consistency in performance

Competency should be demonstrated over time and across a range of simulated or actual workplace situations.

Context of and specific resources for assessment

Context of assessment

Competency should be assessed using live ammunition on a live firing range.

Specific resources for assessment

Access to a grenade launcher, ammunition and a live firing range.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

adopt appropriate firing position

aim the grenade launcher

apply immediate action and stoppage drills

apply recognised safety precautions

Required Knowledge

characteristics, technical capabilities, effects, employment and limitations of the grenade launcher and ammunition

WHS requirements

marksmanship principles

range safety

safety precautions of the grenade launcher

types of targets

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Grenade launcher may include

M79 (40 mm)

GLA (40 mm)

M203 (40 mm)

Standard procedures may include:

Australian Standards

defence instructions

doctrine pamphlets

job guides, other publications

manufacturers' handbooks, industry specifications and technical instructions

WHS regulations

organisational policies and procedures

procedure manuals

relevant local government by-laws

relevant state/territory or federal legislation

routine orders

standing orders

standing operating procedures

written and verbal orders

Ammunition may include:

dummy

high explosive

high explosive dual purpose

illumination

practice

Defects may include:

broken firing pin

burrs

bulging

corrosion

cracks

damaged sighting system

incorrect serial numbers

out of date or missing fully functional classification label

Weapon drills must may include:

safety precautions (e.g. checking clearances)

degrees of weapon readiness

immediate action and stoppage

Marksmanship principles may include:

position and hold must be firm enough to support the weapon

weapon must point naturally at the target without undue physical effort

shot must be released and followed through without disturbance to the firer's position

aiming must be correct

Fire positions may include:

kneeling

prone

sitting

squatting

standing

supported or unsupported

Weapon equipment may include:

complete equipment schedule (CES)

weapon sighting systems

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS) requirements and recognised safety precautions are applied throughout the operation. 
Grenade launcher is handled and carried safely in accordance with standard procedures. 
Ammunition is identified and selected, and safely handled in accordance with standard procedures. 
Grenade launcher is secured in accordance with standard procedures. 
Grenade launcher is stripped and assembled in accordance with standard procedures. 
Grenade launcher and associated equipment are cleaned and serviced as required, in accordance with standard procedures. 
Ammunition is cleaned, inspected, carried and secured in accordance with standard procedures. 
Defects are identified and rectified within limits of authority or reported to supervisor. 
Documentation is completed in accordance with standard procedures. 
Weapon drills are conducted in accordance with standard procedures. 
Marksmanship principles are applied in accordance with standard procedures. 
Fire positions are adopted as required by environment and threat. 
Weapon equipment is employed as required in accordance with standard procedures. 
Grenade launcher is safely fired in accordance with standard procedures. 
Range Safety Brief and Practice Brief are complied with when firing a grenade launcher on a range, in accordance with standard procedures. 
Targets are identified and engaged in accordance with standard procedures. 

Forms

Assessment Cover Sheet

DEFCA411B - Operate a grenade launcher
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

DEFCA411B - Operate a grenade launcher

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: