Assessor Resource

DEFEO801A
Undertake proof firings of small arms

Assessment tool

Version 1.0
Issue Date: April 2024


This unit was developed for specialists working within proof and trials organisations within Defence but may be applicable to any individual in this field of work.

Typically these individuals must demonstrate the ability to work independently or as part of a team under direct and/or indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. All activities are carried out in accordance with relevant organisational policies and procedures.

This unit covers the competency required to undertake proof or trial firings of small arms.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to

safely operate the range of small arms used in the test/trial to conduct all firearm drills

identify all ammunition defects listed in the Range Statement

Consistency in performance

Competency should be demonstrated over time in a variety of environments and tests/trials.

Context of and specific resources for assessment

Context of assessment

Competency should be assessed in the workplace or in a simulated work environment, in accordance with all relevant legislation and organisational requirements.

Specific resources for assessment

Access is required to:

live fire range

live ammunition

Method of assessment

This unit may be assessed with the following unit:

DEFEO101D Work safely with explosive ordnance.

In a public safety environment assessment is usually conducted via direct observation in a training environment or in the workplace via subject matter supervision and/or mentoring, which is typically recorded in a competency workbook.

Assessment is completed using appropriately qualified assessors who select the most appropriate method of assessment.

Assessment may occur in an operational environment or in an industry-approved simulated work environment. Forms of assessment that are typically used include:

direct observation

interviewing the candidate

journals and workplace documentation

third party reports from supervisors

written or oral questions

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

handle small arms safely

identify relevant information

prepare and present simple reports

provide and receive feedback in a constructive manner

use appropriate information technology and software

use relevant verbal and non-verbal communication techniques

Required Knowledge

codes of practice

firing operation and effect of small arms

information sources

organisational guidelines and standards

regulatory requirements

relevant legislation

standards relevant to organisational operations

verbal communication techniques

workplace safety in regard to handling small arms

written communication to a level required in the preparation of simple reports

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Small arms may include:

Personal weapons up to 0.5 inch calibre

Standard procedures may include:

Australian Standards

International standards

Job guides and other publications

Manufacturers' handbooks, industry specifications and technical instructions

Organisational policies and procedures

WHS regulations

Procedure manuals

Relevant local government by-laws

Relevant state/territory or federal legislation

Standard operating procedures

Verbal or written directions

Ammunition may include:

Ball

Blank

Drill

Trace

Weapons drills may include:

Checking clearances

Degrees of weapon readiness

Immediate action and stoppage

Safety precautions

Stripping and assembling

Static fired refers to:

The firing of the weapon or munition using a remote firing arrangement and/or holding device

Person fired refers to:

The firing of a weapon with the firer holding the weapon and firing it in its design mode

Incidents may include:

Equipment malfunction or damage

Procedure difficulty

Safety breaches

Target malfunction

Weapon or munition malfunction

Operator maintenance may include:

Cleaning

Lubricating

Defects may include:

Corrosion

Cracks

Damaged packing

Damaged weapon parts

Dented cartridge cases

Fluting on cartridge case

Incorrect propellants

Proud or recessed primer

Rust

Weeping

Refurbishment may include:

Cleaning up of firing points

Removing and accounting for range stores, produce and ammunition

Post range practice administration may include:

Complete range clearance

Debriefing

Raising of relevant range, training and trade documentation

Submitting reports, returns and evaluations

Undertaking clearances and inspections

Observations may include:

Defects observed

Difficulties or positive occurrences relating to the trial or proof test

Procedural difficulties

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS) requirements and recognised safety precautions including those contained in organisational procedures, are applied throughout the task 
Small arms are safely handled and carried in accordance with standard procedures 
Ammunition is identified, selected and safely handled in accordance with standard procedures 
Weapons drills are conducted in accordance with standard procedures 
Fire positions are adopted in accordance with the proof or trial requirement, where required 
Static fired weapons are safely prepared and secured in accordance with standard procedures 
Ammunition is secured in accordance with standard procedures 
Small arms are fired in a person fired or static fired mode in accordance with proof or trial requirements 
Weapon sighting systems and associated equipment are employed in accordance with standard procedures 
Targets are identified and engaged in accordance with proof or trial requirements 
Incidents are reported in accordance with standard procedures 
Operator maintenance is undertaken in accordance with standard procedures or in accordance with the proof or trial instruction 
Defects are identified and reported in accordance with standard procedures 
Refurbishment of ranges is undertaken in accordance with standard procedures 
Post range practice administration is completed in accordance with standard procedures 
Observations on the firing are reported in accordance with the proof or trial instruction and organisational procedures 

Forms

Assessment Cover Sheet

DEFEO801A - Undertake proof firings of small arms
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

DEFEO801A - Undertake proof firings of small arms

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: