This unit describes the skills required to install sensors as directed by the operational plan in order to detect targets and to provide information to a remote control facility.

This unit was developed for those working in Defence as combat arms personnel required to install sensors as directed by the operational plan in order to detect targets and to provide information to a remote control facility in a deployed operational environment but is applicable to any individual in this field of work.

The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.

Those undertaking this unit would work as part of a team and will be under direct and/or indirect supervision. They would use discretion and judgement, and take responsibility for the quality of their outputs. They would perform specific tasks in a broad range of unpredictable contexts.

No licensing, legislative or certification requirements apply to unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS	PERFORMANCE CRITERIA
Elements describe the essential outcomes	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.
1. Prepare for operation	1.1 Receive purpose and requirement of the surveillance activity from written or verbal instructions issued by supervisor. 1.2 Confirm task specifications and clarify where necessary with supervisor. 1.3 Identify and select surveillance equipment required for the task. 1.4 Check surveillance equipment for serviceability.
2. Prepare and maintain a location	2.1 Occupy designated position, establish reference points and document information. 2.2 Deploy surveillance equipment. 2.3 Confirm optimal configuration with supervisor. 2.4 Test equipment to ensure functionality. 2.5 Camouflage site. 2.6 Maintain communications with stakeholders. 2.7 Conduct operational maintenance.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

applying operational safety

conducting equipment maintenance

applying fieldcraft skills including tactical movement and camouflage

selecting the appropriate configuration and location of remote sensors

installing and maintaining remote sensors physically

maximising the desired coverage of hostile areas

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

characteristics and effects of hostile and friendly equipment and weapons

nature of the threat environment

relevant WHS constraints

Rules of Engagement

sensor equipment characteristics and limitations

tactical techniques and procedures

target recognition

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS	PERFORMANCE CRITERIA
Elements describe the essential outcomes	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.
1. Prepare for operation	1.1 Receive purpose and requirement of the surveillance activity from written or verbal instructions issued by supervisor. 1.2 Confirm task specifications and clarify where necessary with supervisor. 1.3 Identify and select surveillance equipment required for the task. 1.4 Check surveillance equipment for serviceability.
2. Prepare and maintain a location	2.1 Occupy designated position, establish reference points and document information. 2.2 Deploy surveillance equipment. 2.3 Confirm optimal configuration with supervisor. 2.4 Test equipment to ensure functionality. 2.5 Camouflage site. 2.6 Maintain communications with stakeholders. 2.7 Conduct operational maintenance.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

applying operational safety

conducting equipment maintenance

applying fieldcraft skills including tactical movement and camouflage

selecting the appropriate configuration and location of remote sensors

installing and maintaining remote sensors physically

maximising the desired coverage of hostile areas

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

characteristics and effects of hostile and friendly equipment and weapons

nature of the threat environment

relevant WHS constraints

Rules of Engagement

sensor equipment characteristics and limitations

tactical techniques and procedures

target recognition

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Receive purpose and requirement of the surveillance activity from written or verbal instructions issued by supervisor.
Confirm task specifications and clarify where necessary with supervisor.
Identify and select surveillance equipment required for the task.
Check surveillance equipment for serviceability.
Occupy designated position, establish reference points and document information.
Deploy surveillance equipment.
Confirm optimal configuration with supervisor.
Test equipment to ensure functionality.
Camouflage site.
Maintain communications with stakeholders.
Conduct operational maintenance.
Receive purpose and requirement of the surveillance activity from written or verbal instructions issued by supervisor.
Confirm task specifications and clarify where necessary with supervisor.
Identify and select surveillance equipment required for the task.
Check surveillance equipment for serviceability.
Occupy designated position, establish reference points and document information.
Deploy surveillance equipment.
Confirm optimal configuration with supervisor.
Test equipment to ensure functionality.
Camouflage site.
Maintain communications with stakeholders.
Conduct operational maintenance.

Assessment Cover Sheet

DEFMIL022 - Operate remote sensors to detect targets

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

DEFMIL022 - Operate remote sensors to detect targets

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: