Assessor Resource

DEFMIL090
Assist in the preparation, construction, operation and maintenance of a field water-point

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the skills required to assist in testing for water quality, selecting a suitable work site and preparing, constructing and operating a field water point. The unit also includes the assembly and operation of water purification equipment, and the production and storage of potable water to meet the requirements of personnel and equipment deployed into an area without adequate water supply.

This unit applies to combat engineer personnel required to assist in testing for water quality, selecting a suitable work site and preparing, constructing and operating a field water point in a deployed operational environment.

The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.

Those undertaking this unit would typically work as part of a team under direct supervision, but may be responsible for completing individual tasks. They use discretion and judgement, and take responsibility for the quality of their outputs while performing complex tasks in a broad range of unpredictable contexts.

No licensing, legislative or certification requirements apply to unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Locate a supply of water

1.1 Locate a water supply within a designated area.

1.2 Test water for compliance with quality standards.

1.3 Assess suitability of water sources to be used for collection, treatment and storage.

1.4 Prepare site after gaining approval.

2. Prepare a field water point

2.1 Select and wear personal protective equipment.

2.2 Check equipment, tools and materials for serviceability and report faults.

2.3 Locate and mark local utility assets such as water, electricity and gas pipelines to prevent damage and liaise with local authorities as required.

2.4 Handle, prepare, test and store water point chemicals in accordance with standard procedures and report faults.

2.5 Establish and maintain contact with appropriate agencies to facilitate construction activities, when mechanical excavation equipment is required.

2.6 Construct water point and compact/backfill site using manual or mechanical equipment.

2.7 Construct structures such as water towers and storage tanks.

2.8 Assemble, operate and maintain field water supply equipment and accessories.

3. Operate a water point to produce potable water

3.1 Produce, store and distribute potable water.

3.2 Calibrate, service, operate and maintain water treatment and testing equipment.

3.3 Collect and test water samples.

3.4 Record information related to chemical supply, usage and disposal.

3.5 Collect, record, maintain and report process and performance data.

3.6 Inspect and maintain equipment in accordance with manufacturer’s instructions.

4. Refurbish water point site

4.1 Restore work site to normal, when required.

4.2 Dispose of chemicals.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

assembling, operating and disassembling water supply and purification equipment

calculating and recording water flows

following instructions/directives and reporting information

analysing water quality data

handling water purification chemicals

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

WHS requirements

effects of weather on water quality and the operation of the site and plant

risk factors and potential hazards of surface water systems

safe handling and disposal of chemicals

team work principles and strategies

composition of teams and roles and responsibilities of team members

verbal and non-verbal communication techniques

written communication to a level required to complete workplace forms and reports

basic numeracy, such as addition, subtraction and multiplication

formulae and method for calculating water flow and volume

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Locate a supply of water

1.1 Locate a water supply within a designated area.

1.2 Test water for compliance with quality standards.

1.3 Assess suitability of water sources to be used for collection, treatment and storage.

1.4 Prepare site after gaining approval.

2. Prepare a field water point

2.1 Select and wear personal protective equipment.

2.2 Check equipment, tools and materials for serviceability and report faults.

2.3 Locate and mark local utility assets such as water, electricity and gas pipelines to prevent damage and liaise with local authorities as required.

2.4 Handle, prepare, test and store water point chemicals in accordance with standard procedures and report faults.

2.5 Establish and maintain contact with appropriate agencies to facilitate construction activities, when mechanical excavation equipment is required.

2.6 Construct water point and compact/backfill site using manual or mechanical equipment.

2.7 Construct structures such as water towers and storage tanks.

2.8 Assemble, operate and maintain field water supply equipment and accessories.

3. Operate a water point to produce potable water

3.1 Produce, store and distribute potable water.

3.2 Calibrate, service, operate and maintain water treatment and testing equipment.

3.3 Collect and test water samples.

3.4 Record information related to chemical supply, usage and disposal.

3.5 Collect, record, maintain and report process and performance data.

3.6 Inspect and maintain equipment in accordance with manufacturer’s instructions.

4. Refurbish water point site

4.1 Restore work site to normal, when required.

4.2 Dispose of chemicals.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

assembling, operating and disassembling water supply and purification equipment

calculating and recording water flows

following instructions/directives and reporting information

analysing water quality data

handling water purification chemicals

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

WHS requirements

effects of weather on water quality and the operation of the site and plant

risk factors and potential hazards of surface water systems

safe handling and disposal of chemicals

team work principles and strategies

composition of teams and roles and responsibilities of team members

verbal and non-verbal communication techniques

written communication to a level required to complete workplace forms and reports

basic numeracy, such as addition, subtraction and multiplication

formulae and method for calculating water flow and volume

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Locate a water supply within a designated area. 
Test water for compliance with quality standards. 
Assess suitability of water sources to be used for collection, treatment and storage. 
Prepare site after gaining approval. 
Select and wear personal protective equipment. 
Check equipment, tools and materials for serviceability and report faults. 
Locate and mark local utility assets such as water, electricity and gas pipelines to prevent damage and liaise with local authorities as required. 
Handle, prepare, test and store water point chemicals in accordance with standard procedures and report faults. 
Establish and maintain contact with appropriate agencies to facilitate construction activities, when mechanical excavation equipment is required. 
Construct water point and compact/backfill site using manual or mechanical equipment. 
Construct structures such as water towers and storage tanks. 
Assemble, operate and maintain field water supply equipment and accessories. 
Produce, store and distribute potable water. 
Calibrate, service, operate and maintain water treatment and testing equipment. 
Collect and test water samples. 
Record information related to chemical supply, usage and disposal. 
Collect, record, maintain and report process and performance data. 
Inspect and maintain equipment in accordance with manufacturer’s instructions. 
Restore work site to normal, when required. 
Dispose of chemicals. 
Locate a water supply within a designated area. 
Test water for compliance with quality standards. 
Assess suitability of water sources to be used for collection, treatment and storage. 
Prepare site after gaining approval. 
Select and wear personal protective equipment. 
Check equipment, tools and materials for serviceability and report faults. 
Locate and mark local utility assets such as water, electricity and gas pipelines to prevent damage and liaise with local authorities as required. 
Handle, prepare, test and store water point chemicals in accordance with standard procedures and report faults. 
Establish and maintain contact with appropriate agencies to facilitate construction activities, when mechanical excavation equipment is required. 
Construct water point and compact/backfill site using manual or mechanical equipment. 
Construct structures such as water towers and storage tanks. 
Assemble, operate and maintain field water supply equipment and accessories. 
Produce, store and distribute potable water. 
Calibrate, service, operate and maintain water treatment and testing equipment. 
Collect and test water samples. 
Record information related to chemical supply, usage and disposal. 
Collect, record, maintain and report process and performance data. 
Inspect and maintain equipment in accordance with manufacturer’s instructions. 
Restore work site to normal, when required. 
Dispose of chemicals. 

Forms

Assessment Cover Sheet

DEFMIL090 - Assist in the preparation, construction, operation and maintenance of a field water-point
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

DEFMIL090 - Assist in the preparation, construction, operation and maintenance of a field water-point

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: