Assessor Resource

DEFTRP005
Operate a multi-axle trailer

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the skills required to configure, load, tow, manoeuvre and unload a multi-axle trailer coupled to a wheeled vehicle authorised to tow this type of trailer. Multi-axle trailers in this context are used to transport wheeled and tracked vehicles, containers and items of general cargo in a range of operating environments.

This unit was developed for military drivers in a threat environment, but is applicable to any individuals who work in this field.

The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.

Those undertaking this unit would work independently or as part of a team, under direct and indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. They would perform routine tasks in a broad range of unpredictable contexts.

No licensing, legislative or certification requirements apply to unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to tow a multi-axle trailer

1.1 Conduct serviceability check of the trailer.

1.2 Rectify and/or report faults.

1.3 Prepare and configure trailer to meet the requirements of the load/cargo.

1.4 Load trailer with different types of loads.

1.5 Secure and protect load.

2. Tow a multi-axle trailer

2.1 Couple and uncouple multi-axle trailer to a vehicle.

2.2 Tow multi axle trailer.

3. Refurbish a multi-axle trailer

3.1 Unload multi-axle trailer on completion of the task.

3.2 Conduct serviceability and damage checks.

3.3 Rectify and/or report faults.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

loading, restraining and protecting loads

manoeuvring a trailer through a range of driving situations and road conditions

monitoring and anticipating traffic hazards

managing stressful and emergency situations

operating medium and heavy vehicles and towing multi-axle trailers applying WHS requirements

inspecting, loading, coupling/uncoupling, towing, manoeuvring and unloading a multi-axle trailer under a range of road transport operating conditions by day and night carrying different types of loads

configuring a multi-axle trailer to suit the requirements of different types of loads and tasks

loading and unloading a trailer with different types of loads and securing devices

handling emergency situations

demonstrating the ability to manoeuvre, brake, corner, reverse, push the trailer, overtake other vehicles and handle emergency situations.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

WHS requirements for operating medium and heavy vehicles and towing multi-axle trailers

road traffic rules and regulations for operating medium and heavy vehicles and towing multi-axle trailers

safe loading and restraint procedures and limits for trailers

trailer coupling systems

emergency situations that may require towing trailers

Competency should be demonstrated under a range of road transport operating environments towing a multi-axle trailer carrying various types of loads. Assessment will need to be undertaken on a number of occasions to provide the individual with the opportunity to demonstrate competence in manoeuvring a loaded trailer in a range of contexts and conditions.

Competency should be assessed under a range of road and traffic conditions to assess performance in stressful conditions. The assessment should be conducted as part of a ‘long haul’ activity of extended duration loading and towing a number of types of cargo. The individual should be assessed in the interpretation of an instruction for a transport task requiring a multi-axle trailer, preparation and configuration of the trailer and the subsequent loading, restraint and protection of the load.

The individual should then be assessed in coupling a trailer and driving the vehicle which includes the requirement to manoeuvre, brake, corner, reverse, push, overtake other vehicles and handle emergency situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to tow a multi-axle trailer

1.1 Conduct serviceability check of the trailer.

1.2 Rectify and/or report faults.

1.3 Prepare and configure trailer to meet the requirements of the load/cargo.

1.4 Load trailer with different types of loads.

1.5 Secure and protect load.

2. Tow a multi-axle trailer

2.1 Couple and uncouple multi-axle trailer to a vehicle.

2.2 Tow multi axle trailer.

3. Refurbish a multi-axle trailer

3.1 Unload multi-axle trailer on completion of the task.

3.2 Conduct serviceability and damage checks.

3.3 Rectify and/or report faults.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

loading, restraining and protecting loads

manoeuvring a trailer through a range of driving situations and road conditions

monitoring and anticipating traffic hazards

managing stressful and emergency situations

operating medium and heavy vehicles and towing multi-axle trailers applying WHS requirements

inspecting, loading, coupling/uncoupling, towing, manoeuvring and unloading a multi-axle trailer under a range of road transport operating conditions by day and night carrying different types of loads

configuring a multi-axle trailer to suit the requirements of different types of loads and tasks

loading and unloading a trailer with different types of loads and securing devices

handling emergency situations

demonstrating the ability to manoeuvre, brake, corner, reverse, push the trailer, overtake other vehicles and handle emergency situations.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

WHS requirements for operating medium and heavy vehicles and towing multi-axle trailers

road traffic rules and regulations for operating medium and heavy vehicles and towing multi-axle trailers

safe loading and restraint procedures and limits for trailers

trailer coupling systems

emergency situations that may require towing trailers

Competency should be demonstrated under a range of road transport operating environments towing a multi-axle trailer carrying various types of loads. Assessment will need to be undertaken on a number of occasions to provide the individual with the opportunity to demonstrate competence in manoeuvring a loaded trailer in a range of contexts and conditions.

Competency should be assessed under a range of road and traffic conditions to assess performance in stressful conditions. The assessment should be conducted as part of a ‘long haul’ activity of extended duration loading and towing a number of types of cargo. The individual should be assessed in the interpretation of an instruction for a transport task requiring a multi-axle trailer, preparation and configuration of the trailer and the subsequent loading, restraint and protection of the load.

The individual should then be assessed in coupling a trailer and driving the vehicle which includes the requirement to manoeuvre, brake, corner, reverse, push, overtake other vehicles and handle emergency situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Conduct serviceability check of the trailer. 
Rectify and/or report faults. 
Prepare and configure trailer to meet the requirements of the load/cargo. 
Load trailer with different types of loads. 
Secure and protect load. 
Couple and uncouple multi-axle trailer to a vehicle. 
Tow multi axle trailer. 
Unload multi-axle trailer on completion of the task. 
Conduct serviceability and damage checks. 
Rectify and/or report faults. 
Conduct serviceability check of the trailer. 
Rectify and/or report faults. 
Prepare and configure trailer to meet the requirements of the load/cargo. 
Load trailer with different types of loads. 
Secure and protect load. 
Couple and uncouple multi-axle trailer to a vehicle. 
Tow multi axle trailer. 
Unload multi-axle trailer on completion of the task. 
Conduct serviceability and damage checks. 
Rectify and/or report faults. 

Forms

Assessment Cover Sheet

DEFTRP005 - Operate a multi-axle trailer
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

DEFTRP005 - Operate a multi-axle trailer

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: