Assessor Resource

FPISAW3207B
Sharpen band saws

Assessment tool

Version 1.0
Issue Date: March 2024


The unit involves sharpening band saws in a forest products factory setting

The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority

This unit describes the outcomes required to assess the condition of the band saw, set up the sharpening machine and sharpen the saw with a grinder

General workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publication

This unit replaces FPISAW3207A Sharpen band saws

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently sharpen band saws within organisational requirements

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:

following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to sharpening band saws

following organisational policies and procedures relevant to sharpening band saws

sharpening band saws in line with the work order and within prescribed organisational requirements

removing and replacing band saw blades from equipment

Context of and specific resources for assessment

Competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to follow relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to undertaking work applicable to this unit

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge

Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills

Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

The assessment environment should not disadvantage the candidate

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English

Where the participant has a disability, reasonable adjustment may be applied during assessment

Language and literacy demands of the assessment task should not be higher than those of the work role


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit

Required skills

Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely sharpen band saws

Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace

Literacy skills sufficient to accurately record and report workplace information, and maintain documentation

Numeracy skills sufficient to estimate, measure and calculate time required to complete a task

Problem solving skills sufficient to identify problems and equipment faults and demonstrate appropriate response procedures

Required knowledge

Applicable Commonwealth, State or Territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for sharpening band saws

Environmental protection requirements, including the safe disposal of waste material, minimising carbon emissions and the cleaning of plant, tools and equipment

Organisational and site standards, requirements, policies and procedures for sharpening band saws

Environmental risks and hazards

Characteristics of band saw blades

Sharpening methods and geometry

Tooth setting and/or methods for tooth alignment

Established communication channels and protocols

Problem identification and resolution strategies and common fault finding techniques

Types of tools and equipment and procedures for their safe use, operation and maintenance

Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks

Procedures for recording and reporting workplace information

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements:

are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

fire fighting equipment

hazard and risk control

fatigue management

elimination of hazardous materials and substances

safe forest practices including required actions relating to forest fire

manual handling including shifting, lifting and carrying

machine isolation and guarding

Environmental requirements may include:

legislation

organisational policies and procedures

workplace practices

Legislative requirements:

are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care

Organisational requirements may include:

legal

organisational and site guidelines

policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

OHS, emergency and evacuation procedures

ethical standards

recording and reporting requirements

equipment use and maintenance and storage requirements

environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)

Work order is to include:

instructions for the sharpening of band saw blades in designated equipment

and may include:

instructions for the environmental monitoring of work and procedures

environmental care requirements relevant to the work

Appropriate personnel may include:

supervisors

suppliers

clients

colleagues

managers

Blades may include:

wide band saw blades used for processing timber products

narrow band saw blades used for cutting both ferrous and non-ferrous materials

Sharpening is to include:

the amount of material removed from the tooth profile

the ability to produce the required profile

the speed at which the abrasive wheel can remove material without affecting steel characteristics, and the quality of surface texture left by the abrasive wheel along the entire profile and at the intersection of all cutting edge angles

Equipment may include:

alternative sharpening machines and grinding wheels

and is to include:

procedures for equipment lock-out such as protecting operators and co-workers from accidental injury by isolating the machine from the power source

Communication may include:

verbal and non-verbal language

constructive feedback

active listening

questioning to clarify and confirm understanding

use of positive, confident and cooperative language

use of language and concepts appropriate to individual social and cultural differences

control of tone of voice

body language

Cutting performance is to include:

saw performance balanced against achievement of required production time

degree of deviation in the range of sawn products

Teeth are to include:

sharpness of each tooth

damage to teeth

pitch

number of teeth per metre

Set

is the distance cutting edge points extend from the blade surface (or plane) to provide the blade clearance from the material being sawn

in wide bandsaw blades is achieved by swaging and shaping, or tipping tooth points

in narrow bandsaw blades applies to, for example, alternate spring set and wave set to provide clearance

Tension

is the level of stress or 'stiffness' induced at the cutting and back edges of the blade by compressing the blade along the inner zone

Dressing

involves cleaning or shaving the top surface of the grinding wheel to remove the build up of old sharpening metal and coolant and dull abrasive grains

Geometry

is the tooth pitch and the tooth angles that a blade is sharpened at

must match the type and characteristics of the material being sawn

Machine feed

is the speed at which the abrasive wheel on the sharpening machine or grinder moves in and out of the tooth profiles

rates are generally measured in teeth per minute

Pre start-up checks

are conducted to ensure:

machine has been set-up correctly

systems are performing accurately

machine is operating to optimum performance

Testing

is the process of assessing a tooth after machine settings and grinding has been undertaken to check pitch and angle of the sharpening process

Profile

is the shape or outline of the teeth designed to suit the characteristics of the materials being sawn

changes in line with sawing speeds, saw blade specifications, the material being sawn and direction of the sawing process

Disposing of may include:

recycling band saw blades that cannot be sharpened or are damaged in the process

re-using band saw blades that cannot be sharpened or are damaged in the process

Records and reports may include:

the blade type

size

inspection

grading and labelling outcomes

storage locations

quality outcomes

hazards

incidents

equipment malfunctions

and may be:

manual

using a computer-based system or other appropriate organisational communication system

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to sharpening band saws are identified and followed 
Work order is reviewed and checked with appropriate personnel 
Band saw blades to be sharpened are removed from the designated machinery 
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations 
Sharpening process is planned in line with site procedures and environmental requirements 
Communication with others is established and maintained in line with OHS requirements 
Cutting performance of blade is assessed for sharpening requirements and blade replacement reviewed in line with site requirements 
Condition of teeth, set, tension of blade and prior repairs are assessed for suitability to site requirements 
Sharpening machine is selected and grinding wheel changed or dressed 
Machine settings are adjusted to suit required blade geometry and blade set to manufacturer's recommendations 
Selected tooth of blade is aligned with machine feed mechanism 
Pre start-up checks are carried out on equipment in line with site requirements 
Tests are conducted to ensure teeth and machine feed mechanism are aligned 
Depth of machine cut and in-feed are established from blade condition 
Machine sharpening process is monitored to ensure correct grinding conditions and geometry 
Sharpening process is completed with all teeth in sharp condition at correct cutting angle and profile 
Band saw blades that cannot be sharpened or are damaged in the process are disposed of in line with site procedures, manufacturer's recommendations and environmental requirements 
Band saw is packaged for protection during return to service 
Sharpening and equipment faults are recorded and reported to the appropriate personnel 

Forms

Assessment Cover Sheet

FPISAW3207B - Sharpen band saws
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

FPISAW3207B - Sharpen band saws

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: