List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for assembly | 1.1 Review construction plans and work order and where required clarify with appropriate personnel. 1.2 Identify and obtain type and quantity of material and nail plates to be assembled. 1.3 Select appropriate tools and equipment and check for operational effectiveness in line with manufacturer's recommendations. 1.4 Identify and prepare set-up jigs required for construction. |
2. Assemble materials | 2.1 Select timber components from pre-cut material in line with cutting list. 2.2 Reject material with defects and dispose of in line with environmental protection practices. 2.3 Use equipment in line with organisational safety procedures, manufacturer’s instructions environmental protection practices. 2.4 Identify allowable number and position of joins from construction plan. 2.5 Position and clamp components in jigs ready for joining with allowable faults, joins and grain in line with construction standards and grading rules. 2.6 Staple components to maintain temporary alignment during assembly. |
3. Install nail plates | 3.1 Position material and nail plate press over joints. 3.2 Position nail plates on joints and install in line with construction plan. 3.3 Repair or dispose of substandard and damaged nail plates in line with environmental protection practices. 3.4 Correct assembly faults in line with organisational procedures 3.5 Identify routine processing and equipment faults and resolve or report to appropriate personnel. |
4. Prepare material for despatch and report outcomes | 4.1 Check finished material for quality and label in line with work order. 4.2 Remove components from jigs and safely stack in designated location. 4.3 Strap, pack and label finished material ready for transportation. 4.4 Avoid wastage of strapping and packaging materials and maximise use of recycled materials. 4.5 Complete production and quality records and report in line with organisational procedures. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
follow organisational policies and procedures relevant to assembling materials using nail plates
assemble materials using nail plates in line with a work order and construction plans
strap, pack and label bundles of completed products
A person competent in this unit must be able to demonstrate knowledge of:
types of tools and equipment used for assembling products; their purpose, features and operation:
measuring equipment
assembly jigs
nail plate presses
staple guns
nail guns
compressor or compressed air supply
marking equipment
strapping equipment
characteristics of timber
types of materials for assembling with nail plates and their purpose
assembly sequences
compliantly and construction standards
typical assembly faults triggering correction to ensure product quality:
incorrectly positioned joints
timber splits from nailing
incorrectly positioned nail plates
industry standard cross-sections, lengths and tolerances
environmental protection practices for forest products factory settings:
reducing water and energy use
cleaning plant, tools and equipment
disposing of, recycling and reusing timber
typical timber defects and how these affect ability to produce a quality finished product:
warp
wane
cupping
shakes
insect defects
knots
resin pockets
storage layout and categories for stacking finished materials
organisational procedures specific to assembling materials using nail plates:
workplace health and safety with particular emphasis on equipment lock out
use of equipment
communication reporting lines
recording and reporting production outcomes and equipment faults.
The following resources must be made available:
tools and equipment used to assemble products:
measuring equipment
assembly jigs
nail plate presses
staple guns
nail guns
compressor or compressed air supply
marking equipment
strapping equipment
assembly hardware:
nail plates
nail gun nails
staples
pre-cut sections of timber
personal protective equipment suitable for assembling materials
manufacturers’ instructions for equipment use
work order and construction plan with specifications for assembling materials
template documents for recording production outcomes and equipment faults
organisational procedures for assembling materials using nail plates.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.