List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for operation | 1.1 Review and check work order where required with appropriate personnel. 1.2 Identify type and quantity of logs for sawing and check location. 1.3 Select appropriate repair, maintenance and personal protective equipment and check operational effectiveness in line with manufacturer’s recommendations. 1.4 Plan dismantling, transport and set-up processes to optimise recovery time. |
2. Dismantle, transport and assemble hand portable sawmill | 2.1 Follow organisational safety procedures thoughout all processes. 2.2 Follow sequence of activities to dismantle sawmill in line with manufacturer's instructions. 2.3 Load and secure dismantled sawmill equipment for transportation, and move to new location. 2.4 Inspect proposed new work site for potential hazards and work flow interferences. 2.5 Identify safe site for logs, stacking of sawn boards and waste. 2.6 Follow sequence of activities to assemble hand portable sawmill in line with manufacturer's instructions. 2.7 Complete pre start-up checks on equipment to ensure operational effectiveness. 2.8 Identify routine processing and equipment faults and resolve or report to appropriate personnel. |
3. Complete operator maintenance | 3.1 Follow organisational safety procedures to lock out equipment. 3.2 Check saw blades for bluntness or damage. 3.3 Remove and replace saw blades in line with manufacturer's recommendations. 3.4 Dispose of used blades in line with organisational procedures and environmental protection practices. 3.5 Complete basic non-specialist maintenance for equipment. 3.6 Record and report equipment faults and maintenance requirements to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
follow organisational policies and procedures relevant to dismantling, transporting and assembling a hand portable sawmill
dismantle, transport and assemble a hand portable sawmill in readiness to produce green boards in line with a work order and within organisational specifications
complete these types of basic non-specialist maintenance for hand portable sawmills:
cleaning the machine of wood chips and sawdust
replacing blunt and damaged saw blades
inspecting machine parts for wear or damage, including guards
greasing and lubricating moving parts
checking the operation of emergency stop buttons and lock out systems.
A person competent in this unit must be able to demonstrate knowledge of:
purpose, features, operation and basic non-specialist repair and maintenance for hand portable sawmills
sequence of activities to dismantle and re-assemble hand portable sawmills
workflow at the site location
appropriate locations for portable sawmills to optimise efficient and safe workflow
methods for assessing saw blade condition
identifying logs for sawing including:
assessment of diameter range
curvature
faults
species
moisture content
environmental protection practices for forest products factory settings and off-site sawing locations:
reducing water and energy use
cleaning plant, tools and equipment
disposing of, recycling and reusing materials
organisational procedures specific to dismantling, transporting and assembling portable sawmills:
workplace health and safety with particular emphasis on equipment lock out and use of personal protective equipment
communication reporting lines
recording and reporting processing and equipment faults and maintenance requirements.
The following resources must be made available:
hand portable sawmills
tools and equipment used to dismantle and assemble portable sawmills
personal protective equipment suitable for dismantling, transporting and assembling portable sawmills
manufacturers’ instructions for dismantling, transporting and assembling portable sawmills
work order for repair and maintenance activities with specific instructions for portable sawmill location.
template documents for recording processing and equipment faults and maintenance requirements
organisational procedures for dismantling, transporting and assembling portable sawmills.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.