List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for maintenance | 1.1 Review work order and where required check with appropriate personnel. 1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness in line with manufacturer's recommendations. 1.3 Plan maintenance process in line with work order. |
2. Assess saw condition | 2.1 Follow organisational safety procedures thoughout all maintenance and repair processes. 2.2 Remove wide band and gang saws from machinery. 2.3 Handle saws to avoid damaging teeth. 2.4 Clean foreign material on blade surfaces for inspection. 2.5 Inspect saw to assess condition of teeth, tips and saw blade. 2.6 Check and mark teeth or tips requiring repair or replacement. 2.7 Declare saw unserviceable where hazardous defects are found. 2.8 Segregate and dispose of unserviceable saws in line with organisational procedures and environmental protection practices. |
3. Level, tension and back-gauge saw blade | 3.1 Assess and match ridges or lumps across and along saw on both sides of blade. 3.2 Use gauges and straight edges in both directions to test blade accuracy. 3.3 Remove ridges or lumps progressively through levelling and use stretcher or levelling rolls to flatten. 3.4 Localise stresses using controlled levelling or rolling patterns to avoid spring-back and re-occurrence of defects. 3.5 Check saw blade against required curvature using a gauge to identify tensioning requirements. 3.6 Obtain tension curvature across and along saw blade. 3.7 Check alignment of saw back against tolerances using a gauge; roll non-conforming areas to obtain required tolerance. |
4. Repair teeth and blade cracks | 4.1 Place saw blade in welding jig for heat application and welding activities. 4.2 Check amount of damaged tooth to be removed or crack to be repaired and mark weld line. 4.3 Remove metal to proposed line, prepare edge for welding and clean burn marks. 4.4 Apply heat and pressure to prepare worn, broken or ground surface for metal build up or replacement. 4.5 Build up or replace teeth or cracked area using material and prcoesses that ensure specified metal penetration and density. 4.6 Use weld run-off tabs to limit stress and hollows at edges of saw blade. 4.7 Grind or file teeth or cracks to required shape, tolerance and pitch. 4.8 Dispose of saws with irreparable teeth, tips or blades in line with organisational procedures environmental protection practices. 4.9 Identify routine processing and equipment faults and resolve or report to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
follow organisational policies and procedures relvant to maintaining wide band saw blades
Maintain wide band and gang saw blades in line with the work order and within prescribed organisational requirements, including:
Remove and replace saws from equipment
Assess saw condition in line with standard operating procedures
Use welding processes and materials to produce:
weld beads which provides full penetration fusing together adjacent metal parts
welds free from any faults that would have the potential to weaken the strength and endurance capability of the weld deposit and weld zone.
A person competent in this unit must be able to demonstrate knowledge of:
purpose, features and operation of heavy duty wide band and gang saws for which repairs are completed
features and names of different parts of wide band saw blades
purpose, features and operation of tools and equipment used to repair and maintain wide band saw blades:
hammers
stretcher or tension rolls
levelling rolls
tension gauges and straight edges
welding equipment and welding materials
importance of levelling blades, setting tension, applying curvature and setting teeth to match requirements for:
characteristics of various materials sawn
speed of the sawing process
direction of the sawing process
cutting angle for sawing
saw blade specifications
methods for:
removing saw blades from heavy duty wide band and gang saws
assessing saw blade condition
hammering, levelling and tensioning blades to specified requirements
applying curvature
welding to build up and replace teeth
grinding and filing teeth to required shape, tolerance and pitch
characteristics of metal used in wide band saw blades and range of force which can be applied without damaging blades
organisational policies and procedures specific to maintaining wide band saw blades:
workplace health and safety with particular emphasis on equipment lock out and use of personal protective equipment
communication reporting lines
recording and reporting processing and equipment faults
environmental protection practices for repairing and maintaining tools and equipment in forest products factory settings:
reducing water and energy use
cleaning plant, tools and equipment
disposing of, recycling and reusing materials
The following resources must be made available:
tools and equipment used to repair and maintain wide band saw blades:
hammers
stretcher or tension rolls
levelling rolls
tension gauges and straight edges
welding equipment
welding jigs
run-off tabs
punches
engineers hammers
angle grinders
sanders
hand files
abrasive paper or cloth
welding material
tools and equipment to be repaired and maintained:
large heavy duty wide band and gang saws used to cut timber
personal protective equipment suitable for repairing and maintaining wide band saw blades
manufacturers’ instructions for use, repair and maintenance of equipment
work order for repair and maintenance activities with specific instructions for repairing wide band and gang saw blades in specified equipment
documents, spreadsheets and commonly used proformas for recording processing and equipment faults
relevant personnel for the purposes of communicating information
organisational policies and procedures for maintaining wide band saw blades.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.