List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for machining | 1.1 Review work order and check with appropriate personnel. 1.2 Obtain type and quantity of material to be machined from storage location. 1.3 Select appropriate equipment and check for operational effectiveness in line with manufacturer's recommendations. 1.4 Plan material machining process in line with work order. |
2. Set up machines | 2.1 Check safety equipment, including emergency stops, gauges, guards and controls. 2.2 Complete machine settings and adjustments in line with job requirements and manufacturer's instructions. 2.3 Complete trial runs to check machine operation, accuracy and quality of finished work. 2.4 Accept or reject trialled material and dispose of in line with environmental protection practices. 2.5 Adjust machine setting as necessary. |
3. Operate machines | 3.1 Complete equipment pre start-up checks in line with organisational procedures. 3.2 Operate machine in line with manufacturer's instructions, safe operating procedures and environmental protection practices. 3.3 Monitor machine operation to ensure product quality and output. 3.4 Repair sub-quality items to minimise waste and recycle or discard others in line with environmental protection practices. 3.5 Stack material safely in designated location in line with work order requirements. |
4. Complete operator maintenance | 4.1 Follow organisational safety procedures to lock-out equipment. 4.2 Remove and replace fixed cutter heads in line with organisational procedures. 4.3 Joint straight cutters in line with organisational procedures. 4.4 Record and report machining outcomes, equipment faults and maintenance requirements to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
perform sawing, planing, drilling and sanding operations on timbers and boards from the following list, each in line with an individual work order:
native timber species
imported timber species
dressed timber
in-the-rough timber
stress and non-stress graded timber
preservative treated timber
medium density fibreboard
laminated veneer
chipboard
fibreboard and other manufactured board products
coated and/or treated timber products
beams or laminated beams
complete operator maintenance on at least one occasion for each of these types of equipment:
sawing equipment
planing equipment
drilling equipment
sanding equipment
A person competent in this unit must be able to demonstrate knowledge of:
environmental protection practices for forest products factory settings:
reducing water and energy use
cleaning of plant, tools and equipment
disposing of, recycling and reusing timber and other waste
storage layout and categories for:
raw materials
stacking finished materials
machining characteristics of timber and timber defects
cutting patterns and sequences
industry standard cross-sections and lengths
types of machining tools and equipment; their purpose, features, operation and basic non-specialist repair and maintenance:
measuring equipment
docking saws
bench saws
panel saws
bandsaws
panel planers
surface planers
drill presses
boring machines
edge sanders
profile sanders
panel sanders
stroke sanders
methods for assessing saw blade, knife, drill and sanding belt condition
organisational procedures specific to machining activities:
workplace health and safety with particular emphasis on equipment lock out
use and maintenance of equipment
communication reporting lines
recording and reporting cutting process and equipment faults.
The following resources must be made available:
machining tools and equipment:
measuring equipment
docking saws
bench saws
panel saws
bandsaws
panel planers
surface planers
drill presses
boring machines
edge sanders
profile sanders
panel sanders
stroke sanders
maintenance tools and equipment
consumable components for replacement during operator maintenance
personal protective equipment suitable for machining activities
commercially available timbers and boards
manufacturers’ instructions for use and maintenance of equipment
work order for machining activities with specific instructions for the machining and storage of timber and timber products
relevant personnel for the purposes of communicating information
template reports for recording processing and equipment faults
organisational procedures for machining activities.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.