List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for treating | 1.1 Review work order and where required check with appropriate personnel. 1.2 Select appropriate personal protective equipment and check for operational effectiveness. 1.3 Obtain type and quantity of raw boards for surface treatment from storage. 1.4 Select suitable feed rates and chemical products for material being surface treated and plan process in line with work order. |
2. Use equipment to surface treat raw boards | 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices. 2.2 Apply surface treatment, monitor and adjust additive flow rates continually. 2.3 Check spray operations continually; clear blockages and filters while maintaining spray coverage. 2.4 Check boards regularly for surface quality and contamination; take corrective action where required. 2.5 Remove defective boards from treatment process and review for disposal or re-treatment. 2.6 Dry material and stack safely in designated location. |
3. Shut down and clean equipment | 3.1 Coordinate shutdown procedures with other line operators in line with organisational safety procedures. 3.2 Turn off pumps and flush equipment in line with manufacturer’s instructions. 3.3 Dispose of excess chemicals and flushing liquid in line with environmental protection practices. 3.4 Store equipment and chemicals in line with organisational procedures. 3.5 Record and report production outcomes and equipment faults to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
surface treat raw boards in line with individual work orders for each job; types of board to treat includes:
medium density fibreboard
core for laminated veneer
chipboard
fibreboard
plywood
at the completion of each of the above jobs:
shut-down and clean equipment in line with organisational safety procedures
dispose of excess chemicals in line with environmental protection practices
safely store unused chemicals
stack finished boards in storage location according to common size, thickness, length and surface treatment.
A person competent in this unit must be able to demonstrate knowledge of:
environmental protection practices for surface treating raw boards:
reducing water and energy use
cleaning plant, tools and equipment
disposing of, recycling and reusing timber
disposing of hazardous substances
storage layout and categories for:
raw materials
stacking finished boards
characteristics of timber panels and the effects of chemical treatment including:
medium density fibreboard
core for laminated veneer
chipboard
fibreboard
plywood
properties, at a basic level of understanding, of chemicals used for surface treating raw boards and their purpose
methods used to safely store chemicals
typical work flow processes for surface treating raw boards
purpose, features, operation, shut down and cleaning of compressor driven spray boom equipment
range of appropriate chemical flow rates to avoid equipment blockages and optimise quality and quantity of production output
organisational procedures specific to surface treating raw boards:
workplace health and safety with particular emphasis on equipment lock out, use of personal protective equipment and handling hazardous substances
communication reporting lines
recording and reporting production outcomes and equipment faults.
The following resources must be made available:
compressor driven spray boom equipment
personal protective equipment suitable for surface treating raw boards
raw boards which includes one or more of the following:
medium density fibreboard
core for laminated veneer
chipboard
fibreboard
plywood
surface treatment chemicals
manufacturers’:
safety data sheets for surface treatment chemicals
instructions for equipment use
recommendations for cleaning equipment
work order with specific instructions for chemical treatment of timber panel products
template documents for recording production outcomes and equipment faults
relevant personnel for the purposes of communicating information
organisational procedures for surface treating raw boards.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.