Assessor Resource

FWPWPP3201
Produce veneer from debarked logs

Assessment tool

Version 1.0
Issue Date: March 2024


This unit of competency describes the outcomes required to operate a specialised peeling lathe or rotary slicer to produce sheets of timber veneer from debarked logs. Work is completed in a forest products factory setting and includes operator maintenance.

The unit applies to production operators and technicians who produce veneer from debarked logs in a forest and wood products factory setting and includes operator maintenance.

No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for peeling

1.1 Review work order and where required check with appropriate personnel.

1.2 Select appropriate personal protective equipment and check for operational effectiveness.

1.3 Obtain type and quantity of debarked logs for peeling or slicing.

1.4 Plan veneer peeling or slicing process and thickness in line with work order.

2. Peel veneer

2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.

2.2 Check suitability of log size and condition and load into lathe.

2.3 Place drive logs to maximise available veneer and remove waste product.

2.4 Set veneer peeling or slicing process for optimal veneer recovery and grading.

2.5 Adjust machine speed and control of veneer cut to suit log characteristics.

2.6 Dispose of defective material and log cores in line with environmental protection practices.

3. Complete operator maintenance

3.1 Follow organisational safety procedures to lock out equipment.

3.2 Check cutting blades for bluntness or damage.

3.3 Remove and replace cutting blades in line with manufacturer's recommendations.

3.4 Dispose of used blades in line with environmental protection practices.

3.5 Keep machine clear of dust and debris in line with organisational safety procedures.

3.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel.

A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:

produce veneer from debarked logs in line with individual work orders specifying the use of different log species, diameter and length and prescribing varying veneer outputs in:

width

length

thickness

quantity

after each of the above jobs, complete operator maintenance on the equipment used.

A person competent in this unit must be able to demonstrate knowledge of:

environmental protection practices for forest products factory settings:

reducing water and energy use

cleaning plant, tools and equipment

disposing of, recycling and reusing timber and other waste

typical log defects and how they affect ability to produce quality veneer:

warp

wane

cupping

shakes

insect defects

knots

resin pockets

typical flow of material supply in and out of the production area

typical work flow processes for producing veneer from debarked logs and peeling and slicing techniques to achieve veneer thickness to specifications

appropriate range of feed rates for different log diameters and lengths

purpose, features and operation of equipment used to produce veneer from debarked logs :

specialised veneer peeling lathes

rotary slicers

methods for assessing cutting blade condition and completing basic non-specialist repair and maintenance

organisational procedures specific to producing veneer from debarked logs:

workplace health and safety with particular emphasis on equipment lock out and use of personal protective equipment

communication reporting lines

recording and reporting production outcomes, equipment faults and maintenance requirements.

The following resources must be made available:

specialised veneer peeling lathes or rotary slicers

maintenance tools and equipment

consumable cutting blades

personal protective equipment suitable for producing veneer from debarked logs

a diverse range of commercial debarked logs

manufacturers’ instructions for use and maintenance of equipment

work order with specific instructions for cutting timber veneer from debarked logs

template documents for recording production outcomes, equipment faults and maintenance requirements

relevant personnel for the purposes of communicating information

organisational procedures for producing veneer from debarked logs.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessor requirements

Assessors must:

hold the appropriate assessor competency standards as outlined in regulations; and

be able to demonstrate vocational competencies at least to the level being assessed; and

be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for peeling

1.1 Review work order and where required check with appropriate personnel.

1.2 Select appropriate personal protective equipment and check for operational effectiveness.

1.3 Obtain type and quantity of debarked logs for peeling or slicing.

1.4 Plan veneer peeling or slicing process and thickness in line with work order.

2. Peel veneer

2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.

2.2 Check suitability of log size and condition and load into lathe.

2.3 Place drive logs to maximise available veneer and remove waste product.

2.4 Set veneer peeling or slicing process for optimal veneer recovery and grading.

2.5 Adjust machine speed and control of veneer cut to suit log characteristics.

2.6 Dispose of defective material and log cores in line with environmental protection practices.

3. Complete operator maintenance

3.1 Follow organisational safety procedures to lock out equipment.

3.2 Check cutting blades for bluntness or damage.

3.3 Remove and replace cutting blades in line with manufacturer's recommendations.

3.4 Dispose of used blades in line with environmental protection practices.

3.5 Keep machine clear of dust and debris in line with organisational safety procedures.

3.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel.

Not Applicable

A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:

produce veneer from debarked logs in line with individual work orders specifying the use of different log species, diameter and length and prescribing varying veneer outputs in:

width

length

thickness

quantity

after each of the above jobs, complete operator maintenance on the equipment used.

A person competent in this unit must be able to demonstrate knowledge of:

environmental protection practices for forest products factory settings:

reducing water and energy use

cleaning plant, tools and equipment

disposing of, recycling and reusing timber and other waste

typical log defects and how they affect ability to produce quality veneer:

warp

wane

cupping

shakes

insect defects

knots

resin pockets

typical flow of material supply in and out of the production area

typical work flow processes for producing veneer from debarked logs and peeling and slicing techniques to achieve veneer thickness to specifications

appropriate range of feed rates for different log diameters and lengths

purpose, features and operation of equipment used to produce veneer from debarked logs :

specialised veneer peeling lathes

rotary slicers

methods for assessing cutting blade condition and completing basic non-specialist repair and maintenance

organisational procedures specific to producing veneer from debarked logs:

workplace health and safety with particular emphasis on equipment lock out and use of personal protective equipment

communication reporting lines

recording and reporting production outcomes, equipment faults and maintenance requirements.

The following resources must be made available:

specialised veneer peeling lathes or rotary slicers

maintenance tools and equipment

consumable cutting blades

personal protective equipment suitable for producing veneer from debarked logs

a diverse range of commercial debarked logs

manufacturers’ instructions for use and maintenance of equipment

work order with specific instructions for cutting timber veneer from debarked logs

template documents for recording production outcomes, equipment faults and maintenance requirements

relevant personnel for the purposes of communicating information

organisational procedures for producing veneer from debarked logs.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessor requirements

Assessors must:

hold the appropriate assessor competency standards as outlined in regulations; and

be able to demonstrate vocational competencies at least to the level being assessed; and

be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Review work order and where required check with appropriate personnel. 
Select appropriate personal protective equipment and check for operational effectiveness. 
Obtain type and quantity of debarked logs for peeling or slicing. 
Plan veneer peeling or slicing process and thickness in line with work order. 
Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices. 
Check suitability of log size and condition and load into lathe. 
Place drive logs to maximise available veneer and remove waste product. 
Set veneer peeling or slicing process for optimal veneer recovery and grading. 
Adjust machine speed and control of veneer cut to suit log characteristics. 
Dispose of defective material and log cores in line with environmental protection practices. 
Follow organisational safety procedures to lock out equipment. 
Check cutting blades for bluntness or damage. 
Remove and replace cutting blades in line with manufacturer's recommendations. 
Dispose of used blades in line with environmental protection practices. 
Keep machine clear of dust and debris in line with organisational safety procedures. 
Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel. 

Forms

Assessment Cover Sheet

FWPWPP3201 - Produce veneer from debarked logs
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

FWPWPP3201 - Produce veneer from debarked logs

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: