List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for painting | 1.1 Review work order and where required check with appropriate personnel. 1.2 Select appropriate personal protective and other equipment and check for operational effectiveness. 1.3 Obtain type and quantity of panels for painting from storage. 1.4 Select panel painting process, feed rates and paints and plan in line with work order. |
2. Paint panels | 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices. 2.2 Load paint products in equipment and apply paint to panel, monitoring and adjusting flow rates and viscosity continually. 2.3 Check paint operations regularly and clear blockages and filters to maintain paint coverage. 2.4 Check panels regularly for surface quality and contamination, and grade according to work order requirements. 2.5 Remove defective panels from painting process and review for disposal or re-painting. 2.6 Dry and stack material safely in designated location. |
3. Shut down and clean equipment | 3.1 Coordinate shutdown procedures with other line operators in line with organisational safety procedures. 3.2 Turn off pumps and flush equipment in line with manufacturer’s instructions. 3.3 Dispose of excess paint and flushing liquid in line with environmental protection practices. 3.4 Store equipment and paint in line with organisational procedures. 3.5 Record and report production outcomes and equipment faults to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
paint panels in line with individual work orders for each job; types of panels include:
medium density fibreboard
chipboard
fibreboard
plywood
at the completion of each of the above jobs:
shut-down and clean equipment in line with organisational safety procedures
dispose of excess paint in line with environmental protection practices
safely store unused paint
stack finished panels in storage location according to common size, thickness, length and coating.
A person competent in this unit must be able to demonstrate knowledge of:
environmental protection practices for painting panels:
reducing water and energy use
cleaning plant, tools and equipment
disposing of, recycling and reusing timber
disposing of hazardous substances
storage layout and categories for:
raw materials
stacking finished panels
characteristics of timber panels and the types of paint most suitable for application:
medium density fibreboard
chipboard
fibreboard
plywood
properties, at a basic level of understanding, of paints:
water based
oil based
solvent based
viscosity, film thickness and film wetness of paints
methods used to safely store paint
typical work flow processes for painting panels
purpose, features, operation, shut down and cleaning of painting equipment including:
roller coating lines
spray booths
curtain coating lines
trays
overflow trays
thinner reservoirs
spray guns
roller coaters
range of appropriate paint flow rates to avoid equipment blockages and optimise quality and quantity of production output
organisational procedures specific to surface painting panels:
workplace health and safety with particular emphasis on equipment lock out, use of personal protective equipment and handling hazardous substances
communication reporting lines
recording and reporting production outcomes and equipment faults.
The following resources must be made available:
painting equipment which must include one or more of the following:
roller coating lines
spray booths
curtain coating lines
trays
overflow trays
thinner reservoirs
spray guns
roller coaters
personal protective equipment suitable for painting panels
panels which must include one or more of the following:
medium density fibreboard
chipboard
fibreboard
plywood
paint which must include one or more of the following:
water based
oil based
solvent based
manufacturers’:
safety data sheets for paint
instructions for equipment use
recommendations for cleaning equipment
work order with specific instructions for painting panels
template documents for recording production outcomes and equipment faults
relevant personnel for the purposes of communicating information
organisational procedures for painting panels.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.