List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for joining veneer | 1.1 Review work order and where required check with appropriate personnel. 1.2 Select appropriate personal protective equipment and check for operational effectiveness. 1.3 Obtain type and quantity of veneer for matching and joining from veneer production process. 1.4 Select matching and joining process in line with work order. |
2. Match and join veneer | 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices. 2.2 Complete pre start-up equipment checks to ensure operational effectiveness. 2.3 Set machine functions and feed rate for optimal product recovery. 2.4 Select joining method in line with veneer to be matched. 2.5 Inspect sheets visually and match veneer to specification. 2.6 Clip sheets to provide clean edges and join in line with work order. 2.7 Assess veneer visually throughout joining process for strength and production defects. |
3. Redistribute material | 3.1 Assess joins and grade veneer in line with organisational procedures and industry standards. 3.2 Direct material to storage or processing operations in line with organisational procedures. 3.3 Dispose of sub-standard material and excess glue in line with environmental protection practices. 3.4 Clean work area and store unused glue in line with organisational safety procedures. 3.5 Record and report production outcomes and equipment faults to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
join veneer using the following techniques in line with individual work orders that prescribe different lengths, widths, thicknesses and quantities for each job:
stitching
gluing
taping
match veneer according to:
grain
grade
length
colour
for each of the above jobs, visually inspect joined veneer and grade according to industry and organisational standards.
A person competent in this unit must be able to demonstrate knowledge of:
environmental protection practices for forest products factory settings:
reducing water and energy use
cleaning plant, tools and equipment
disposing of, recycling and reusing timber
disposing of hazardous substances
typical flow of material supply in and out of the veneer production area
features of veneer used to match:
grain
grade
length
colour
typical work flow processes and techniques used to join veneer:
stitching
gluing
taping
methods used to visually assess condition of veneer for strength and typical production defects:
overlaps
gaps
veneer faults
joining spacing’s
purpose, features and operation of equipment used to match and join veneer:
clipping machines
guillotines
veneer sewing equipment
veneer gluing equipment
veneer taping equipment
methods used to safely store glue
key features of and applicable terminology for industry standard grades for joined veneer
organisational procedures specific to matching and joining veneer:
workplace health and safety with particular emphasis on equipment lock out, use of personal protective equipment and handling hazardous substances
communication reporting linesrecording and reporting production outcomes, equipment faults and maintenance requirements.
The following resources must be made available:
clipping machines
guillotines
veneer sewing equipment
veneer gluing equipment
veneer taping equipment
personal protective equipment suitable for matching and joining veneer
consumable tape and glue
commercial single thickness veneer of varying thicknesses
manufacturers’:
instructions for equipment use
safety data sheets for glue
work order with specific instructions for matching and joining veneer
template documents for recording production outcomes and equipment faults
relevant personnel for the purposes of communicating information
organisational procedures for matching and joining veneer.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.