List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare to slice veneers. | 1.1 Review work order and check with appropriate personnel. 1.2 Identify and follow safe work procedure for producing veneers from prepared flitches. 1.3 Identify hazards and control risk in the work area. 1.4 Acquire type and quantity of timber species to be sliced from storage location. 1.5 Select equipment and conduct pre-start check in line with manufacturer's recommendations and site requirements. 1.6 Plan veneer slicing process and thickness in line with site procedures. 1.7 Establish and maintain communication with relevant personnel as required, to ensure safety and production requirements are met. |
2. Load flitches, slice veneers and dispose of waste. | 2.1 Check size and condition of prepared flitches and load acceptable flitches into slicer. 2.2 Position flitches to maximise available veneer and remove waste product. 2.3 Set and operate veneer slicing process to optimise veneer recovery in line with site procedures. 2.4 Constantly adjust machine speed and control of veneer cut to suit flitch characteristics in line with site procedures. 2.5 Dispose of defective material and rejected flitch and backing-board in line with site procedures and environmental requirements. |
3. Maintain equipment, clean up and follow record keeping procedure. | 3.1 Lock out equipment according to standard operating procedure. 3.2 Check cutting blades for blunt or damaged condition in line with manufacturer’s recommendations and site procedures, and remove and replace as required. 3.3 Clear dust, off-cuts and debris from machine area and dispose of in line with in line with safe work procedure and environmental requirements. 3.4 Record and report processing and equipment faults to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
slice timber veneers from prepared flitches in line with work order and safe work procedure, using a slicing machine
identify hazards and control risk to self, others and plant throughout the veneer production process
visually inspect prepared flitches to determine suitability for loading into slicer
identify defective materials throughout the production process and dispose of appropriately
perform lock-out, blade inspection, replacement and cleaning procedure on slicer
record and report production, quality and fault information using workplace record keeping procedure and systems.
A person competent in this unit must be able to demonstrate knowledge of:
site standards, industry standards, workplace requirements, policies and safe work procedures relevant to producing veneers from prepared flitches
emergency response procedures (fire, accident and serious equipment malfunction) relevant to own role and responsibility
environmental protection requirements, including guidelines for waste minimisation, recycling, re-use and the safe disposal of waste material created by production and cleaning
hazards and risks associated with production of veneers from prepared flitches and appropriate risk controls as referred to the in the range of conditions
veneer types: quarter sawn, back sawn, radial (or rotary) sawn
characteristics of timber veneers: type, width, length, thickness
characteristics of flitch and timber defects: warp, wane, cupping, shakes, insect defects, knots, resin pockets
slicing processes using vertical or horizontal slicing equipment
established communication channels and protocols for communicating with relevant personnel as part of the production process
problem identification and resolution strategies and common fault finding techniques
procedures for the safe operation of slicing machine and visual inspection, removal and replacement of cutting blades
procedures for the lock-out and cleaning of equipment
procedures for recording and reporting production, quality, maintenance and faults information (manual or computer-based).
The following resources must be made available:
work order
safe work procedure for producing veneer from prepared flitches
personal protective equipment required to produce veneer from prepared flitches
first aid equipment
vertical or horizontal slicing machine
prepared flitches
relevant personnel for the purposes of communicating information
manual or computer-based information recording systems for recording production, quality and fault information.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.