Assessor Resource

HLTDT509D
Construct cast metal alloy removeable partial denture framework

Assessment tool

Version 1.0
Issue Date: March 2024


This unit applies to work in dental technology

This unit of competency describes the skills and knowledge required to construct burn-out patterns for cast metal framework; and devest, trim, treat, finish and evaluate alloy structures

All procedures are carried out in accordance with work health and safety (WHS) policies and procedures, current infection control guidelines, Australian and New Zealand Standards, State/Territory legislative requirements and organisation policy

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Pre-requisite units

This unit must be assessed after successful achievement of pre-requisites:

HLTDT301D Construct models

HLTDT302D Construct custom impression trays

HLTDT303D Construct registration rims

HLTDT304D Articulate models and transfer records

HLTDT519C Construct simple complete removable acrylic dentures and appliances

HLTIN301C Comply with infection control policies and procedures


Employability Skills

This unit contains Employability Skills




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate this competency unit:

The individual being assessed must provide evidence of specified essential knowledge as well as skills

Consistency of performance should be demonstrated over the required range of workplace situations

Context of and specific resources for assessment:

Assessment should replicate workplace conditions as far as possible

Where, for reasons of safety, access to equipment and resources and space, assessment takes place away from the workplace, simulations should be used to represent workplace conditions as closely as possible

Method of assessment

Evidence of essential knowledge and understanding may be provided by:

traditional or online (computer-based) assessment

written assignments/projects

Case study and scenario as a basis for discussion of issues and strategies to contribute to best practice

Questioning

Staff and/or client feedback

Supporting statement of supervisor

Authenticated evidence of relevant work experience and/or formal/informal learning

Role play/simulation

Access and equity considerations:

All workers in the health industry should be aware of access and equity issues in relation to their own area of work

All workers should develop their ability to work in a culturally diverse environment

In recognition of particular health issues facing Aboriginal and Torres Strait Islander communities, workers should be aware of cultural, historical and current issues impacting on health of Aboriginal and Torres Strait Islander people

Assessors and trainers must take into account relevant access and equity issues, in particular relating to factors impacting on health of Aboriginal and/or Torres Strait Islander clients and communities

Related units:

This unit should be assessed in conjunction with the following related competency unit:

HLTDT508C Construct removable acrylic partial dentures


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit.

Essential knowledge:

The candidate must be able to demonstrate essential knowledge required to effectively do the task outlined in elements and performance criteria of this unit, manage the task and manage contingencies in the context of the identified work role

This includes knowledge of:

Applied oral anatomy

dentition - arrangement of the teeth, naming and coding of teeth

structures of the oral cavity - hard and soft palate, lateral and posterior borders of the oral cavity, tongue and floor of the mouth

teeth - form and function

Dental alloys

Heat treatment

Infection control guidelines for the decontamination of completed laboratory work

Melting and casting

WHS and material safety data sheets

Relevant material science for carrying out procedures

Solidification

Surface finishing

Essential skills:

It is critical that the candidate demonstrate the ability to

Consistently design and manufacture burn-out patterns for simple cast metal frameworks

Consistently devest, trim, shape and evaluate cast alloy denture framework

Consistently comply with current infection control guidelines, Australian Standards and legislative requirements as they relate to the dental technician's specific job role

Consistently comply with work health and safety (WHS) policies and procedures as they relate to the dental technician's specific job role

In addition, the candidate must be able to effectively do the task outlined in elements and performance criteria of this unit, manage the task and manage contingencies in the context of the identified work role

This includes the ability to:

Consistently follow work health and safety (WHS) policies and procedures

Consistently follow sequenced written instructions and manufacturer specifications for the preparation of materials

Critically evaluate all work produced so as to consistently meet both the technical requirements of the laboratory and client requirements

Select materials and techniques to manufacture cast metal alloy removable partial denture framework

Use appropriate practices to ensure efficient use of power and other resources

Use safe work practices to minimise the risk of transmission of infection including:

consistently following the procedure for washing and drying hands

consistently limiting contamination

consistently maintaining clean receiving and work areas

consistently putting into practice clean techniques

consistently using personal protective equipment

Use literacy skills to read and follow directions, policies and procedures including:

infection control policies and procedures

laboratory policies and procedures

material safety data sheets

work health and safety (WHS) policies and procedures

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Alloys may include:

Cobalt chromium based alloys

Gold alloys

traditional gold alloys

medium and low gold alloys

Titanium alloys

Tissue relief provided to areas of the oral mucosa which may include:

Maxillary and mandibular tori

Palatal areas

Rugae

Tuberosities

Melting/Casting techniques may include:

Arc melting

Centrifugal casting

Flame melting

Gas pressure casting

Induction melting

Resistance melting

Vacuum casting

Visual examination of the cast alloy structure may include:

Confirming that the cast:

is effective

fits the master model

is free of defects

meets the requirements of the planned design

complies with the prescription

is fit for the purpose

Trim and shape the alloy structure may include:

Ensuring that the:

casting has no sharp edges

occlusal contacts with metal are removed

bubbles on the fitting surface are removed prior to fitting

clasps have appropriate form and dimension

connections with soft tissue are appropriately formed

food lines are clearly defined

components are all the correct size and shape

Checking the alloy structure may include but is not limited to:

The accuracy of the casting

The strength of the casting

The integrity of the casting

The surface finish of the casting

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Read and interpret the prescription 
Select alloy 
Confirm the survey of model that has been carried out by the operator 
Transfer design to master model 
Block out undesirable undercuts 
Create clasp ledges 
Scribe food lines 
Apply tissue relief 
Apply saddle relief 
Duplicate master model in refractory material to produce an accurate copy of the model 
Construct sprue former as necessary 
Prepare the refractory model appropriately and apply an appropriate hardener or sealant 
Transfer design outline correctly to the refractory model 
Select appropriate wax and pre-formed components 
Wax up patterns to the refractory cast consistent with the design 
Sprue the pattern using material of the correct size and in the correct shape and position for the material being cast and attach it to the investment former 
Select appropriate investment and technique according to the alloy 
Prepare investment material in accordance with manufacturer's instructions 
Treat the surface of the wax, patterns and sprues 
Allow for investment setting time in accordance with manufacturer's instructions 
Select burn out and preheat cycles for appropriate investment/alloy combination 
Burn-out wax from investment mould and hold at recommended temperature for casting 
Melt alloy and cast using appropriate materials, equipment and technique 
Select and apply cooling cycle 
Remove the cast alloy structure from the investment without damaging the integrity of the structure 
Remove oxides using an appropriate abrasive or chemical treatment 
Remove sprues and trim and shape the alloy structure 
Treat the surface of the alloy using appropriate materials and equipment and finish using appropriate abrasives and polishes 
Position the cast on the master model and check accuracy of major connection and clasps and adjust any metal occlusal contacts with antagonist 
Decontaminate the denture framework according to infection control guidelines 
Dry the denture framework, replace on model and place in a sealed container for dispatch 

Forms

Assessment Cover Sheet

HLTDT509D - Construct cast metal alloy removeable partial denture framework
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

HLTDT509D - Construct cast metal alloy removeable partial denture framework

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: