Assessor Resource

ICAI5173B
Install and configure a single-segment local area network switch

Assessment tool

Version 1.0
Issue Date: March 2024


This unit defines the competency required to select, install and test a single switch on one segment of a local area network (LAN).

The following units are linked and form an appropriate cluster:

ICAA5144B Determine best fit topology for a local network

ICAI5174B Install high end switches in multi switched local area networks

ICAI5176C Install and configure router

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

ICAI2015B

Install software applications

ICAI3101B

Install and manage network protocols


Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

Assessment must confirm the ability to install switches without the network losing connectivity or failing.

To demonstrate competency in this unit the person will require access to:

Switches

Network devices

Workstations and servers

Cabling

Context of and specific resources for assessment

Setting up switches is an important task for most organisations and with a diverse range of switches, care should be taken to ensure security is managed effectively.

The breadth, depth and complexity covering planning and initiation of alternative approaches to skills or knowledge applications across a broad range of technical and/or management requirements, evaluation and coordination would be characteristic.

Assessment must ensure:

The demonstration of competency may also require self-directed application of knowledge and skills, with substantial depth in some areas where judgement is required in planning and selecting appropriate equipment, services and techniques for self and others.

Applications involve participation in development of strategic initiatives as well as personal responsibility and autonomy in performing complex technical operations or organising others. It may include participation in teams including teams concerned with planning and evaluation functions. Group or team coordination may also be involved.

Method of assessment

The purpose of this unit is to define the standard of performance to be achieved in the workplace. In undertaking training and assessment activities related to this unit, consideration should be given to the implementation of appropriate diversity and accessibility practices in order to accommodate people who may have special needs. Additional guidance on these and related matters is provided in ICA05 Section 1.

Competency in this unit should be assessed using summative assessment to ensure consistency of performance in a range of contexts. This unit can be assessed either in the workplace or in a simulated environment. However, simulated activities must closely reflect the workplace to enable full demonstration of competency.

Assessment will usually include observation of real or simulated work processes and procedures and/or performance in a project context as well as questioning on underpinning knowledge and skills. The questioning of team members, supervisors, subordinates, peers and clients where appropriate may provide valuable input to the assessment process. The interdependence of units for assessment purposes may vary with the particular project or scenario.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICAA5144B Determine best-fit topology for a local network

ICAI5174B Install high-end switches in multi-switched local area networks

ICAI5176B Install and configure router

An individual demonstrating this competency would be able to:

Demonstrate understanding of a broad knowledge base incorporating theoretical concepts, with substantial depth in some areas

Analyse and plan approaches to technical problems or management requirements

Transfer and apply theoretical concepts and/or technical or creative skills to a range of situations

Evaluate information, using it to forecast for planning or research purposes

Take responsibility for own outputs in relation to broad quantity and quality parameters

Take some responsibility for the achievement of group outcomes

Maintain knowledge of industry products and services

Additionally, an individual demonstrating this competency would be able to:

Demonstrate knowledge in a well-developed range of switch configurations

Apply solutions to a variety of switch-related problems

Interpret and apply available technical and network information


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Methods for troubleshooting switches (e.g. knowing how to stop user access ports 'flapping' when two switches try to auto-configure their port speed and duplex setting to match each other's settings, but are not able to synchronise with each other)

Cabling skills to follow a hierarchical network design

Implementation and configuration of networks

Configuring a workstation within a network environment

Required knowledge

Differences between standard and intelligent (i.e. configurable) switches and between switches and hubs

Documentation skills for networks (e.g. labelling of cable terminations and developing a cut sheet or cabling map)

Common network cable types and connectors

Common network topologies

Implementation and configuration of networks

Advantages and disadvantages of switches over hubs

Australian Computer Society Code of Ethics

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Network capacity

LAN topology support (e.g. Ethernet, AppleTalk, Token Ring, FDDI)

port bandwidth capabilities (e.g. 100 megabits per second)

hardware reliability

expandability (e.g. number of available uplink ports)

redundant power supply (AC/DC)

Topology may include:

ring

star

bus

hierarchical

hybrid

Switch produced by the following vendors:

Accton

Cisco

DLink

Intel

3Com

NetGear

System 3000 Ethernet

Bay

Computer may include:

laptops

workstations

servers

other devices

Peripherals may include but are not limited to:

Printers, scanners, tape cartridges

Speakers, multimedia kits

Personal computer fax, modems

Input equipment may include mouse, touch pad, keyboard, pens

Mobile phones, palmtops and personal digital assistants (PDAs), laptops and desktop computers

Bluetooth devices, universal serial bus (USB), Firewire (IEEE 1394)

User may include:

a person within a department

a department within the organisation

a third party

Cable may include but is not limited to:

UTP

STP

fibre

Standard may include:

EIA/TIA 568A

EIA/TIA 568B

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Determine and document the topology of the LAN 
Investigate and determine current and future network capacity according to current and future business requirements 
Determine the number and type of switch required, with reference to current and future network requirements 
Determine the requirements for network management and security, as prescribed by organisational policy 
Select the switch and switch operating system software version with the appropriate features according to required specifications 
Choose computers and consider what effect on traffic servers, routers and other network devices will have, when implemented according to network requirements 
Assemble and mount in rack for physical security and connect switch and peripherals, in accordance with manufacturer requirements 
Connect switches 
Connect user to access points using cable that meets the appropriate standard 
Connect power to the switch, power it up and check operation 
Establish a valid network connection with other network devices 
Configure a network address for the switch 
Install and/or configure simple network management protocol (SNMP) agent software, on each switch, to collect network traffic data for the management information base (MIB) from that segment of the network and relay it to the management console 
Install and configure SNMP management console software on a computer designated to be the network manager's main console, to collect network traffic data from the switch acting as agents 
Manually configure the user access ports of the switch for speed and for full- or half-duplex operation 
Test the switch and other network devices in accordance with manufacturer requirements and organisational guidelines 
Ensure that there is connectivity across the network 
Test SNMP by unplugging some machines from the switch or powering down a switch and observe whether the SNMP management software reports these events 
Make adjustments to the network, depending on test and troubleshooting results 

Forms

Assessment Cover Sheet

ICAI5173B - Install and configure a single-segment local area network switch
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICAI5173B - Install and configure a single-segment local area network switch

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: