Assessor Resource

ICPCBF281
Set up machine for basic laminating

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the skills and knowledge required to set up a machine for a range of laminating processes, including laminating reel to reel, sheet to reel and reel to sheet.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for job

1.1 Job specifications are read and interpreted from job documentation or production control system

1.2 Set-up is carried out correctly in minimum time with minimum wastage

1.3 Availability of all job related components is checked

2. Set up delivery systems

2.1 Delivery systems are set up and adjusted according to job instructions

3. Set up laminating machine

3.1 Application system cylinder is set up and adjusted according to job specifications

3.2 Adhesive application system is set up and adjusted according to job specifications

3.3 Binding pressures are set and adjusted according to job specifications

3.4 Drying system is set up and adjusted according to job specifications

4. Set up in-line units

4.1 Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications

4.2 Assistance is given in set-up of major in-line printing/converting/binding units

5. Conduct sample run

5.1 Raw material to be used for sample is organised correctly

5.2 Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures

5.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures

5.4 Results are interpreted to determine adjustment requirements

5.5 Adjustments are carried out according to product and machine specifications


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for job

1.1 Job specifications are read and interpreted from job documentation or production control system

1.2 Set-up is carried out correctly in minimum time with minimum wastage

1.3 Availability of all job related components is checked

2. Set up delivery systems

2.1 Delivery systems are set up and adjusted according to job instructions

3. Set up laminating machine

3.1 Application system cylinder is set up and adjusted according to job specifications

3.2 Adhesive application system is set up and adjusted according to job specifications

3.3 Binding pressures are set and adjusted according to job specifications

3.4 Drying system is set up and adjusted according to job specifications

4. Set up in-line units

4.1 Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications

4.2 Assistance is given in set-up of major in-line printing/converting/binding units

5. Conduct sample run

5.1 Raw material to be used for sample is organised correctly

5.2 Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures

5.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures

5.4 Results are interpreted to determine adjustment requirements

5.5 Adjustments are carried out according to product and machine specifications

This section specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Delivery systems MUST include EITHER:

reel

OR

sheet.

Setting up and adjusting MUST include EITHER:

unwind and rewind reels

webbing procedures and web control systems

splicing/joining reels

sheeter

OR

feeder

sheet/section pick-up and transportation system

transfer system.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job specifications are read and interpreted from job documentation or production control system 
Set-up is carried out correctly in minimum time with minimum wastage 
Availability of all job related components is checked 
Delivery systems are set up and adjusted according to job instructions 
Application system cylinder is set up and adjusted according to job specifications 
Adhesive application system is set up and adjusted according to job specifications 
Binding pressures are set and adjusted according to job specifications 
Drying system is set up and adjusted according to job specifications 
Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications 
Assistance is given in set-up of major in-line printing/converting/binding units 
Raw material to be used for sample is organised correctly 
Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures 
Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures 
Results are interpreted to determine adjustment requirements 
Adjustments are carried out according to product and machine specifications 

Forms

Assessment Cover Sheet

ICPCBF281 - Set up machine for basic laminating
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICPCBF281 - Set up machine for basic laminating

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: