List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Set up and adjust units | 1.1 All details required for job are checked and confirmed against job specifications 1.2 Correct materials are checked and made available for the job 1.3 Adhesives appropriate for the substrate, application process, and machine are selected 1.4 Work area is made safe and ready for production according to safety requirements 1.5 Blades are sharp and fitted as necessary, with units calibrated according to job specifications 1.6 Settings are checked against job specifications before production is commenced 1.7 Adhesives are positioned correctly and applied evenly |
2. Confirm quality of output | 2.1 A sample from the machine is selected and checked to ensure it conforms to required quality standards 2.2 Adjustments are made when standards are not met 2.3 Each in-line process is monitored and minor adjustments made during production, as required 2.4 Samples are continuously monitored for defects, and removed where relevant 2.5 Efficiency, quality and output rate of the production run are monitored for problems, and any deficiencies resolved 2.6 Wastage is monitored, kept to a minimum and correctly disposed of according to enterprise quality standards 2.7 Locations of all emergency shutdown buttons and triggers are known |
Evidence of the ability to:
correctly set up machinery and produce scoring, folding and gumming that meets job specifications for envelope dimensions, envelope squareness, flap dimensions, throat size, gum position, gum level and gum evenness according to job specifications, performance criteria, and within the production timeframe.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
list common faults associated with folder gluer machines, the causes, and corrective measures
explain correct set-up procedures to meet work health and safety requirements and enterprise requirements
describe different types of adhesives used
describe the process used to check quality.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to an in-line scoring, folding and gluing machine used in the manufacture of envelopes.
Assessors must satisfy NVR/AQTF assessor requirements.