Assessor Resource

ICPCBF406
Set up and load in-line smart card machine

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the performance outcomes, skills and knowledge required to set up, adjust and load an in-line smart card machine in preparation for production.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Set and adjust sections of machine

1.1 All details required for the job are checked and confirmed according to job specifications

1.2 Correct materials are checked and available for the job

1.3 All light sensors and proximity sensors are operating

1.4 Mills are set to right cavity depth for chips

1.5 Tape indexer and die are cleaned and chip registration is correct

1.6 Implanting module is set up and registered and adhesives are available and dispenser is clean and ready

1.7 Machine and in-line components are initialised

2. Confirm computer settings

2.1 Encoder settings are correct and conform to job specifications

2.2 Tester settings are correct and conform to job specifications

2.3 Setting on the computer that controls entire machine is correctly set

3. Set up printer unit

3.1 Print head is set up and adjusted according to job specifications

3.2 Ink and solvent levels are checked and refilled if necessary

3.3 Settings are selected according to job specifications

3.4 Drying is checked as sufficient to key ink to the substrate

3.5 Printer is set up according to work health and safety (WHS) guidelines

4. Load machine

4.1 Substrate is prepared according to job specifications

4.2 Substrate is positioned correctly to the machine

4.3 Faulty material is visually identified and removed according to WHS requirements and enterprise procedures

4.4 Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures

4.5 Settings are checked according to job specifications before production starts

4.6 Work area is safe and ready for production according to safety requirements

Evidence of the ability to:

correctly set up and adjust an in-line smart card machine and load it in preparation for production in accordance with job specifications and listed performance criteria

demonstrate all safety devices on the machine.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

describe production quality requirements

explain waste disposal procedures for faulty material and procedures for correct handling of material

explain important features of the smart card printing and encoding machine

explain principles of printing and ink usage.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to:

special purpose tools

smart card printing and encoding machine.

Assessors must satisfy NVR/AQTF assessor requirements.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Set and adjust sections of machine

1.1 All details required for the job are checked and confirmed according to job specifications

1.2 Correct materials are checked and available for the job

1.3 All light sensors and proximity sensors are operating

1.4 Mills are set to right cavity depth for chips

1.5 Tape indexer and die are cleaned and chip registration is correct

1.6 Implanting module is set up and registered and adhesives are available and dispenser is clean and ready

1.7 Machine and in-line components are initialised

2. Confirm computer settings

2.1 Encoder settings are correct and conform to job specifications

2.2 Tester settings are correct and conform to job specifications

2.3 Setting on the computer that controls entire machine is correctly set

3. Set up printer unit

3.1 Print head is set up and adjusted according to job specifications

3.2 Ink and solvent levels are checked and refilled if necessary

3.3 Settings are selected according to job specifications

3.4 Drying is checked as sufficient to key ink to the substrate

3.5 Printer is set up according to work health and safety (WHS) guidelines

4. Load machine

4.1 Substrate is prepared according to job specifications

4.2 Substrate is positioned correctly to the machine

4.3 Faulty material is visually identified and removed according to WHS requirements and enterprise procedures

4.4 Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures

4.5 Settings are checked according to job specifications before production starts

4.6 Work area is safe and ready for production according to safety requirements

Evidence of the ability to:

correctly set up and adjust an in-line smart card machine and load it in preparation for production in accordance with job specifications and listed performance criteria

demonstrate all safety devices on the machine.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

describe production quality requirements

explain waste disposal procedures for faulty material and procedures for correct handling of material

explain important features of the smart card printing and encoding machine

explain principles of printing and ink usage.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to:

special purpose tools

smart card printing and encoding machine.

Assessors must satisfy NVR/AQTF assessor requirements.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
All details required for the job are checked and confirmed according to job specifications 
Correct materials are checked and available for the job 
All light sensors and proximity sensors are operating 
Mills are set to right cavity depth for chips 
Tape indexer and die are cleaned and chip registration is correct 
Implanting module is set up and registered and adhesives are available and dispenser is clean and ready 
Machine and in-line components are initialised 
Encoder settings are correct and conform to job specifications 
Tester settings are correct and conform to job specifications 
Setting on the computer that controls entire machine is correctly set 
Print head is set up and adjusted according to job specifications 
Ink and solvent levels are checked and refilled if necessary 
Settings are selected according to job specifications 
Drying is checked as sufficient to key ink to the substrate 
Printer is set up according to work health and safety (WHS) guidelines 
Substrate is prepared according to job specifications 
Substrate is positioned correctly to the machine 
Faulty material is visually identified and removed according to WHS requirements and enterprise procedures 
Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures 
Settings are checked according to job specifications before production starts 
Work area is safe and ready for production according to safety requirements 

Forms

Assessment Cover Sheet

ICPCBF406 - Set up and load in-line smart card machine
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICPCBF406 - Set up and load in-line smart card machine

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: