OHS factors that must be considered when setting up and/or operating machine transport systems areas of the reel stand that should be monitored to ensure trouble-free operation areas of the sheet-fed feeder that should be monitored to ensure trouble-free operation OHS factors that must be considered when setting up and/or operating machine delivery systems checks needed when substrate is removed from the machine OHS factors that must be considered when maintaining the cutting process important points to monitor when maintaining the rotary cutting process sectors of the basic in-line printing/converting/binding/finishing process that may need to be monitored and adjusted to meet the approved standards production difficulties that can be expected during production runs OHS factors that must be considered when problem solving on the rotary machine cutting process the procedure for correcting common machine faults OHS factors that must be considered when conducting machine shutdown procedures checks needed when waste is removed from the machine and surrounding area for disposal or recycling checks needed when cutting devices or knives are cleaned, stored or replaced ready for the next run areas of the machine that require cleaning at the end of the run production records that need to be kept or written up information that should be included in this reporting procedure quality aspects that should be considered in a completed rotary cutting job production areas that may have to be adjusted to meet client requirements machine manuals, safety and other documentation that are relevant to this task and where they are kept information that is included in these documents
|