OHS factors that must be considered when setting up and/or operating machine transport systems areas of the reel stand that should be monitored to ensure trouble-free operation OHS factors that must be considered when setting up and/or operating machine delivery systems areas of the sheet-fed feeder that should be monitored to ensure trouble-free operation checks needed when substrate is removed from the machine OHS factors that must be considered when using the folding machine areas to continuously observe to ensure the smooth trouble-free operation of the machine areas of the in-line process that should be monitored to assure the quality of the product OHS factors that must be considered when adjusting/correcting the machine TWO causes of out-of-square folding and explain how each may be corrected segments of quality assurance that would be inspected at the completion of the sample run communication action that should be instigated if job is out-of-square communication action that should be instigated if ink is too wet for production communication action that should be instigated if the job does not coincide with the sample part(s) of the machine that should be adjusted if the sheet is creasing OHS factors that must be considered when cleaning the machine important tasks that must be performed to correctly shut down the machine finished work preparation for dispatch areas of the machine that need regular cleaning materials that need to be cleaned from the machine keeping the machine clear of surface rust (condensation) quality aspects that should be considered in a completed folded job alterations needed to production to meet client requirements machine manuals, safety and other documentation that are relevant to this task and where they are kept information that is included in these documents
|