OHS factors that must be considered when setting up and/or operating machine transport systems areas of the reel stand that should be monitored to ensure trouble-free operation area of the web control system that should be adjusted to maintain correct web tension area of the web control system that should be adjusted to maintain correct positioning of the web areas of the sheet-fed feeder that should be monitored to ensure trouble-free operation parts of the sheet pick-up system that are to be adjusted to ensure accurate and continuous sheet handling OHS factors that must be considered when setting up and/or operating machine delivery systems areas of the delivery system that should be observed to maintain tension areas of the delivery system that should be observed to prevent damage to the finished product checks to be made when substrate is removed from the machine OHS factors that must be considered when maintaining the cutting process items of importance to consider when maintaining rotary cutting operations checks made on: cutting pressures, cutting registration, packing of cutting area, condition of cutting edges, the smooth running of the operation indicators that demand the replacement of cutting edges checks to be made when cutting accuracy is adjusted ways in which a clean and precise result can be guaranteed production difficulties that can be expected during production runs OHS factors that must be considered when problem solving on the rotary machine cutting process checks to be made when packing cutting devices procedure for correcting any machine faults OHS factors that must be considered when conducting machine shutdown procedures checks to be made when waste is removed from the machine and surrounding area for disposal or recycling checks to be made when shutting down the machine checks to be made when the cutting devices or knives are cleaned, stored or replaced ready for the next run areas of the machine that require cleaning at the end of the run cleaning agents that are used in cleaning the machine build-ups that need to be cleaned from the machine production records that need to be kept or written up information that should be included in this reporting procedure quality aspects that should be considered in a completed rotary cutting job steps that should be taken to ensure that important features of the production control system are followed production areas that may have to be adjusted to meet client requirements items that must be checked against the client's sample machine manuals, safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents
|