OHS factors that must be considered when setting up and/or operating machine transport systems areas of the reel stand that should be monitored to ensure trouble-free operation area of the web control system that should be adjusted to maintain correct web tension area of the web control system that should be adjusted to maintain correct positioning of the web areas of the sheet-fed feeder that should be monitored to ensure trouble-free operation parts of the sheet pick-up system that are to be adjusted to ensure accurate and continuous sheet handling OHS factors that must be considered when setting up and/or operating machine delivery systems areas of the delivery system that should be observed to maintain tension areas of the delivery system that should be observed to prevent damage to the finished product checks to be made when substrate is removed from the machine OHS factors that must be considered when maintaining the cutting process indicators that demand the replacement of a knife checks to be made when cutting pressure is adjusted ways in which registration can be guaranteed production difficulties that can be expected during production runs OHS factors that must be considered when problem solving on the machine maintaining the cutting process checks to be made when packing cutting devices checks to be made when correcting dull cutting edges on equipment checks to be made when correcting the depth of embossing checks to be made when correcting out-of-square results OHS factors that must be considered when conducting machine shutdown procedures checks to be made when waste is removed from the machine and surrounding area for disposal or recycling checks to be made when shutting down the machine checks to be made when the cutting devices or knives are cleaned or replaced ready for the next run areas of the machine that require cleaning at the end of the run production records that need to be kept or written up information that should be included in this reporting procedure quality aspects that should be considered in a completed cutting job steps that should be taken to ensure that important features of the production control system are followed machine manuals, safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents
|