vital information required on job ticket checks prior to set up (availability of materials etc.) correct cylinders chosen for the job important considerations when handling gravure cylinders parts of the unit that need to be checked to ensure the cylinder is correctly installed OHS factors that need to be considered when operating the reel in-feed and delivery systems how the printing side of the material ischosen what would be the effect of low web tension on the print what other types of web splices could be used appropriately for the job risks associated with the rewind of the machine what would be the effect of excessive web tension at the rewind of the machine what are the environmental and OHS concerns with regard to inks and additives how is the suitability of ink matched to the particular job what would happen if the ink were too viscose how would an ink that was slightly light be modified to meet the needs of the job what methods are available to check the ink for correct colour who passes the colour prior to running the job what precautions are necessary when handling doctor blades how are the machine specifications determined, relating to the specific job what steps should be taken to ensure that the inking system was adjusted correctly why is the inking system ink level maintained at a certain level what is the optimum make ready speed for the job what steps are taken to incorporate the in-line processes into the make ready how is the equipment used in in-line processing protected against damage during set up what methods can be used to minimise waste during make ready what procedures are undertaken to have the print approved what quality control measurements should be applied to the proof to test against known standards what do you check on the initial print prior to running how are the settings to be adjusted determined what process is used to plot the success of the machine adjustment how are the final results recorded for future reference what machine manuals, safety and other documentation are relevant to this task and where are they kept and information included in these documents
|