information on the work ticket listing the type of coating required action taken if vital information were missing from the job ticket checks that should be undertaken prior to set up (availability of materials etc) major OHS concerns when setting up the sheet or reel transportation system choosing the coating side of the material effect of low web tension on the print effect of inefficient web splices determining the sheet or reel position for the job effect he side lay selection has on the job selecting the appropriate front lays carrying out a register check use of a two-sheet cut out on most feeders (sheet) checking of a sheet is missing or late checking of a web break safety risks associated with the rewind of the machine effect of excessive web tension at the rewind of the machine effect that too much vacuum on the slow-down wheels has on the job determining the position of register or bustle wheels effect that excessive jogging would have on the stack OHS concerns that are relevant to the use of coatings types of coatings and their applications suitability of the coating for the job ability of the coat to adhere to the product amount of coating required range of viscosities that should you run with on an aqueous coating effect of incorrect viscosity on coating adjusting the viscosity of a coating methods that the coating use to solidify drying UV coating printing principle that is being utilised to apply aqueous coating importancethat gluing tabs are not coated temperature the drier is set at to dry aqueous coating determining which image carrier (plate or blanket) to use position of the coating checked against the print effect that skeleton wheels could have on the surface of the coating measuring the amount of gloss on the surface responsibility for the final "OK" on the job effect that you get when you don't have enough coating on a sheet effect that a UV coating would have on a wet print effect that excessive temperature would have on the sheet effect that you would get if the viscosity were too high or too low effect that you would get if ink coverage were excessive, ie over 250% machine manuals, safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents
|