Assessor Resource

ICPPR492C
Use on-press print control devices

Assessment tool

Version 1.0
Issue Date: March 2024


This unit requires the press operator to access or input print quality data and to perform adjustments to match the proof and maintain print quality throughout the run.

This unit describes the performance outcomes, skills and knowledge required to use computerised on-press print control devices.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the ability to:

may be defined by enterprise/operator or default tolerances, client requirements, colour tolerances, industry standards

demonstrate an ability to find and use information relevant to the task from a variety of information sources

set up and align monitoring device to appropriate standards on THREE occasions

produce profiles of samples taken during THREE different print runs that show print production is within agreed tolerances, if possible using different variables

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of these. Off the job assessment must be undertaken in a closely simulated workplace environment

a computerised printing machine.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

this unit is an additional skill to most printing units and may be assessed at the same time.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication of ideas and information by communicating specifications for colour profiles and pre-press requirements for printing to clients

collecting, analysing and organising information by collating and integrating information on colour profiles and press performance

planning and organising activities by establishing sequence of monitoring to ensure quality output

teamwork when integrating job planning with pre-press

mathematical ideas and techniques by understanding and applying colour profiles and curves to machine adjustment

problem-solving skills by monitoring samples and adjusting equipment as necessary

use of technology by efficiently using monitoring systems to ensure quality output

Required knowledge

ICC profiling

underlying principle of densitometry

underlying principle of spectrophotometry

basic underlying principles for determining tolerance in densitometry and spectrophotometry

an original colour control strip determinates

determining the accuracy of the elements in a colour strip

ensuringconsistent print quality output

recognising colour contamination

setting alarm limits for colour contamination

sample to ensure consistency

processes that you would put in place if sample varies from standard

ways quality can vary and how they can be fixed

computerised functions, common faults and electronic registration systems

information that you need from pre-press to ensure quality product

information that you need to give to pre-press to ensure quality product

meaning of the terms registration, fit, position and alignment

importance of registration marks

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Presses may include:

press must be aligned to recognised colour standard.

Quality standards may include:

CIP3 and CIP4.

Monitoring systems may include:

built-in or add-on or stand alone systems including: image control. Electronic colour management eg densitometry, colour imagery, Komori system, spectrophotometry.

Electronic data transfer may include:

press management systems such as Prepress Interface, PECOM.

Plates may include:

colour bars must be original.

Specified standards may include:

may be defined by enterprise/operator or default tolerances, client requirements, colour tolerances, industry standards.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
CIP3/CIP4 data is accessed for the next print run 
Data is pre-set and options/parameters selected according to the next job specifications 
Data is released to press according to manufacturer's recommended procedure 
Accurate position and fit are attained 
Approximate colour, density and ink/water balance if applicable are attained 
Make ready sheets are scanned or corrections are inputted until the print matches the proof or the client's requirements 
Client or supervisor's approval is obtained prior to running the job 
Print quality is continuously monitored visually 
Sheets are scanned to verify visual assessment 
Any correctional data is released to maintain print quality 
Maintenance tasks are performed according to the operator's manual 
Equipment is calibrated according to the operator's manual 

Forms

Assessment Cover Sheet

ICPPR492C - Use on-press print control devices
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICPPR492C - Use on-press print control devices

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: