adjustments that are necessary to the machine prior to setting up maintenance that is required on the machine and feeder prior to the commencement of printing substrate is to be used on this job procedure that you use for checking the screen sequence of colours, ink, substrate and squeegee/flood coater prior to printing the system for setting the feed board and loading substrate the need to prepare substrate or item when loading the feeder adjustment of the stock feed system for this machine the correct positioning, registering and locking the screen in position need to adjust the off contact/peel-off requirements of the screen the OHS requirements when working with infra red/UV curing units the relationship between ink deposit, squeegee speed and belt speed/temperature of the drying/curing unit the routine maintenance you undertake on this drying/curing unit OHS concerns that are there when using an automatic machine the effect of humidity on the substrate the correct viscosity of the ink prior to printing the rectification of the change in the viscosity of the ink during a production run evaluation and maintenance of the print quality during the run the ideal printing rate for this substrate on this machine production output handling to prevent offsetting of the ink the effect that the ink conditions have on output capacity the need to determine the exact count and to record production details on the job sheet the health hazards associated with ink/solvents the correct procedure for removing the ink without damaging the screen the correct method of cleaning squeegees/flood coaters, machine and surrounding area maintenance that is required on this machine after printing machine manuals, safety and other documentation that are relevant to this task and where they are kept information that is included in these documents
|