Assessor Resource

ICPSP371C
Manually produce complex screen prints

Assessment tool

Version 1.0
Issue Date: April 2024


This unit requires the individual to manually produce three- or more colour screen prints.

This unit describes the performance outcomes, skills and knowledge required to manually produce three- or more colour screen prints.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

manually produce a three- or more colour screen print according to job specifications

demonstrate an ability to find and use information relevant to the task from a variety of information sources

manually produce TWO different multi-colour print runs according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of both of these

off the job assessment must be undertaken in a closely replicated workplace environment.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICPSU202C Prepare, load and unload product on and off machine

ICPSP351C Prepare machine and drying/curing unit

any basic set up units.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication of ideas and information by completing workplace documentation

collecting, analysing and organising information by checking substrate for conformance to job specifications

planning and organising activities by producing a proof print prior to doing the job run

teamwork when seeking approval prior to commencement of the job run

mathematical ideas and techniques by setting the belt speed and required energy

problem-solving skills by continuously evaluating and adjusting print quality

use of technology by using the various equipment and machinery required to produce prints

Required knowledge

criteria for selecting the correct substrate for the job

ink and substrate compatibility

characteristics of solvents and ink additives and determining compatibility

adjustments necessary on the equipment prior to setting up

routine user maintenance that is required for this equipment

method that is used for checking the screen, ink, substrate and squeegee prior to printing

maintenance that is required on the printing base

lay edge on the equipment

correct position, register and lock of the screen in position

selection of squeegee to be use

off contact distance

selection of drying/curing system to print/cure this job

speed/temperature of the unit

routine maintenance that is required on this unit

OHS concerns that are there when producing a manual print

need to condition some substrates

correct viscosity of ink

rectification of the problem of alteration to ink viscosity during the run

evaluation and maintenance of print quality during the run

ideal printing rate on this equipment

procedure that you have for checking and stacking production output

correct procedure for removing ink without damaging the screen

correct method of cleaning squeegees, equipment and the surrounding area

manuals, safety and other documentation that are relevant to this task and where are they kept and information that is included in these documents

other sources of information that are available

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Drying/curing units may include:

drying systems commonly used and relative to the industry sector.

Quality standards may include:

should meet client requirements and enterprise and industry standards.

Enterprise procedures may include:

tasks must be performed according to enterprise procedures.

Types of techniques may include:

manual screen printing techniques relative to the industry sector.

Complexity may include:

multi-colour jobs.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Substrate is checked for conformance to job specifications with any irregularities reported and/or rectified 
Substrate position and stencil registration are adjusted according to job specifications 
Ink is applied to the screen in the quantity required for the screen size 
Equipment is kept clean and spillage is minimised 
Colour is mixed and ink is checked for conformance to job specifications 
Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying/curing, artwork detail and other technical aspects according to job specifications 
Adjustments are made as required 
Appropriate approval to commence production is sought prior to commencement 
Belt speed and energy required are set to achieve desired properties 
Printing speed production is adjusted to maximise quality and output 
Print quality is continuously evaluated and adjusted as required 
Effects of ink alterations during run are monitored and appropriate action taken according to manufacturer's/supplier's and job specifications 
Workplace documentation on job is completed as required 
Curing and drying are constantly monitored and adjusted according to manufacturer's/supplier's and job specifications 
Equipment is lubricated, cleaned and adjusted according to manufacturer's/supplier's specifications 
Fault conditions are identified and reported according to enterprise procedures 
Output is checked for thorough drying/curing before stacking 
Job status and progress are checked for conformance to job specifications and any necessary action is taken 
Excess ink, screens, squeegees and flood coaters are removed and cleaned according to OHS requirements and manufacturer's/supplier's specifications 
Waste materials are disposed of according to manufacturer's/supplier's specifications, regulatory requirements and enterprise procedures 
Equipment and surrounding areas are cleaned according to manufacturer's/supplier's specifications and enterprise procedures 

Forms

Assessment Cover Sheet

ICPSP371C - Manually produce complex screen prints
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICPSP371C - Manually produce complex screen prints

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: