Assessor Resource

ICTCBL2005B
Install customer cable support systems

Assessment tool

Version 1.0
Issue Date: April 2024


Technical staff who install and provide cabling infrastructure for customer premises and equipment apply the skills and knowledge in this unit.

They may be required to do new installations, upgrades or maintain existing networks in domestic, commercial and industrial installations. Communications applications include digital and analog, telephony, data, video, digital broadcasting, computer networks, local area networks (LAN), wide area networks (WAN) and multimedia.

This unit applies to indoor and outdoor cable and systems within customer premises.

This unit describes the performance outcomes, skills and knowledge required to install support systems for cable infrastructure. It involves planning cable routes and selecting and installing a support structure.

The activity may be for a new cable installation, upgrade of cable capacity for an existing network or subsystem, or cabling infrastructure for convergence to Next Generation Networks (NGN).

Assessment by a TITAB registered assessor is recommended.

The six unit competency set ICTCBL2005B , ICTCBL2006B , ICTCBL2008B , ICTCBL2012B , ICTCBL2017B and ICTCMP2022B . that meets the Australian Communications and Media Authority’s (ACMA) requirements for Cabling Provider Registration (CPR), is generally used as part of a more specialised customer cabling qualification. This set is usually regarded as more suitable for new entrants where limited industry experience has been obtained and forms the major part of specialised qualifications, such as ICT203103 Certificate II in Telecommunications Cabling. When these six units are undertaken as a set within state and territory funding approved programs, the two benchmark CPR units (ICTCBL2136B and ICTCBL2137B ) are not required.

All customer cabling work in the telecommunications, fire, security and data industries must be performed by a registered cabler. All cablers are required to register with an ACMA-accredited registrar.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the ability to:

plan a cable route and cable support system

interpret related floor plans, building plans, reflected ceiling plans and schematic drawings

install three different support structures:

catenary wire

ducts and or trays

frame back-mounts

complete support installation applying relevant regulations and standards

comply with all related OHS requirements and work practices.

Context of, and specific resources for assessment

Assessment must ensure:

sites where customer cable support systems may be installed

use of equipment currently used in industry

relevant regulatory and equipment documentation that impact on cable installation activities.

Methods of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

review of a hands-on project completed by the candidate

review of an oral and written report with completed documentation

direct observation of the candidate installing a cable support system.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICTCBL3009B Install, terminate and certify structured cabling installation.

Aboriginal people and other people from a non-English speaking background may have second language issues.

Access must be provided to appropriate learning and assessment support when required.

Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.

In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.

Where applicable, physical resources should include equipment modified for people with special needs.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

communication skills to liaise with internal and external personnel on technical and operational matters

literacy skills to interpret technical documentation, equipment manuals and specifications

numeracy skills to take and analyse measurements

planning and organisational skills to:

arrange site access

interpret and apply relevant regulations and standards

organise and maintain equipment

problem solving skills to solve equipment and logistics problems

safety awareness skills to:

apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities

select and use required personal protective equipment conforming to industry and occupational health and safety (OHS) standards

work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

technical skills to:

read and interpret drawings related to:

cable coding system

cable layouts

frame locations

identifiers

outlet locations

use correct methods of running and fastening cables in commercial buildings

use hand and power tools.

Required knowledge

building construction of commercial buildings

cable and services segregation clearances to ensure cable route complies with manufacturer’s, enterprise, legislative and industry codes of practice

features and operating requirements of equipment

information required to operate appropriate equipment according to specifications

installation methods and performance requirements

legislation, codes of practice and other formal agreements that impact on the work activity

manufacturer’s requirements for safe operation of equipment

specific OHS requirements relating to the activity and site conditions

typical issues and challenges that occur on site.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Site security arrangements may include:

access times and methods

approval to enter site

approved entry requirements

electronic surveillance

security clearance.

Relevant legislation, codes, regulations and standards may include:

Australian Communications Industry Forum (ACIF) standards and codes

ACMA technical standards

AS Communications Cabling Manual (CCM) Volume 1

AS/NZS 3000:2007

AS/NZS 3080:2003

AS/NZS 3084:2003

AS/NZS 3085.1:2004

AS/NZS IEC 61935.1:2006

AS/NZS IEC 61935.2:2006

AS/NZS ISO/IEC 14763.3:2007

AS/NZS ISO/IEC 15018:2005

AS/NZS ISO/IEC 24702:2007

Australian building codes and regulations

cabling security codes and regulations

confined spaces regulations

Environmental Protection Acts

fire regulations

mining legislation

noise abatement and heritage legislation

OHS

regulated or industry codes of practice

technical standards AS/ACIF S008:2006 and AS/ACIF S009:2006.

Safety hazards may refer to:

access points that may contain:

hazardous light (non-visible laser)

radio frequency (RF) emission

contact with remote power feed

electrical supply and areas of earth potential rise (EPR) that require mandatory separation from communications cable

hazardous conduit as according to AS 1345:1995 conduit colours associated with a hazardous service.

Other services may include:

availability and suitability of existing cabling trays and fixing systems

fire sprinkler systems

gas and water mains

high voltage (HV) power.

Tools may include:

cutters

drills

explosive power tools

hammers

hand or power (electrical or air) tools

power leads.

Plans may include:

building plans

floor plans

reflected ceiling plans

schematic drawings.

Cable routes may include:

ducting systems

false or suspended ceilings

raised floors

subfloor ducting

wall cavities.

Cable may include:

cable compliant with appropriate ACMA technical standard requirements

structured:

Category 5, 6, 6A, 7 or 7A

shielded twisted pairs (STP) or unshielded twisted pairs (UTP)

underground or aerial.

Support system may refer to:

back-mount frames for distributors formally main distribution frame (MDF), intermediate distribution frame (IDF), final distribution point (FDP))

cable trays:

cable ladder

galvanised steel

low or high sided

perforated

PVC

single or multiple channel

catenary wire

ducts:

closed

metal

open

PVC

single or multiple channel

line poles

systems:

between buildings or poles

exposed areas

in building risers designed for services installation

installed in ceilings

on external building walls

under floors

suspension.

Safe manner may include:

safe use and handling of:

chemicals

materials

tools and equipment

work platforms

ladders

scaffold

scissor lifts or cherry pickers

use of protective clothing:

earmuffs

gloves

head protection

kneepads

masks

protective suits

safety boots

safety glasses.

Documentation may include:

inventory of material used on project

record of installation procedures

update of cable plan and route.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Arrange access to the site according to required procedure and comply with site security arrangements and relevant legislation, codes, regulations and standards 
Confirm site capacities for storage and location of cable feeders or establish alternative methods 
Determine customer specifications, manufacturer’s and enterprise requirements for cable support 
Notify appropriate personnel of identified safety hazards at the cabling worksite 
Plan cable route identifying and avoiding other services and remote power feeding services operating at above telecommunications network voltage (TNV) on site in commercial buildings 
Select tools and materials for installation of support system from work specifications and schedules 
Review relevant plans and verify cable locations 
Select cable routes appropriate to the location of building services providing access to all outlets and enabling cable to be supported to the outlet point 
Plan safe and efficient installation by accurate identification of structural building requirements and identified site constraints 
Identify cable and services segregation clearances to ensure cable route complies with manufacturers, enterprise, legislative and industry codes of practice 
Select an appropriate support system for the planned cable route and identified site constraints 
Prepare the support system for capability to meet the planned concentration of cable in any location to facilitate ready access for maintenance and to allow for future expansion 
Mark out and install fixings and structures securely in a safe manner to manufacturer’s specifications ensuring cable weight can be supported in all operating conditions 
Align support structure correctly to enable cable to be installed evenly, in order and without damage 
Install protective earthing to industry standards 
Conduct work with minimal disruption to ongoing customer activity 
Check and adjust installed supports to ensure cable will not be exposed to damage during installation and operation 
Remove installation waste and debris from worksite and dispose of according to environmental requirements to maintain safe worksite conditions 
Complete documentation 

Forms

Assessment Cover Sheet

ICTCBL2005B - Install customer cable support systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICTCBL2005B - Install customer cable support systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: