List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Specify requirements for voice over wireless architecture | 1.1 Analyse voice requirements for use over a wireless network 1.2 Specify wireless requirements for voice applications for design considerations 1.3 Verify network for voice readiness and suitability |
2. Design the implementation of secure VoWLAN | 2.1 Configure wireless client devices 2.2 Design and configure the WLAN for VoWLAN with security configurations 2.3 Design and configure infrastructure devices 2.4 Devise structured troubleshooting methodology for VoWLAN implementation |
3. Design and implement QoS for wireless applications | 3.1 Plan general design considerations for wired QoS 3.2 Design wireless QoS deployment schemes 3.3 Configure WLAN equipment for QoS |
4. Design, implement and test multicast over wireless environment | 4.1 Evaluate general multicast concepts 4.2 Analyse the implications for multicast in 802.11 4.3 Configure multicast requirements for a wireless network 4.4 Devise structured troubleshooting methodology for multicast in a WLAN environment |
5. Plan and scope the wireless network for video and high-bandwidth applications | 5.1 Design and implement QoS for latency-sensitive applications 5.2 Analyse the requirement for video applications over 802.11n WLAN 5.3 Calculate and predict bandwidth requirements for video applications over the wireless network 5.4 Analyse the impact of the WLAN interconnectivity for devices on QoS for devices or the wired side |
Evidence of the ability to:
analyse and specify voice over wireless architecture requirements
design and implement voice applications over wireless local area network (WLAN)
implement a quality of service (QoS) for wireless applications
use network tools to configure and test wireless infrastructure and applications
plan and scope the wireless network bandwidth.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
explain the configuration, verification and troubleshoot procedures required to undertake:
router operation and routing
virtual local area network (VLAN) switching and inter-switching communications
summarise iDevice operating system (iOS) and internet protocol (IP) networking models
outline video and high-bandwidth applications and requirements
explain voice applications and protocols
clarify voice over wireless local area network (VoWLAN) technologies
describe the following aspects of wireless networks:
current regulations, standards and certifications
deployment schemes
network security technology
network topologies and elements
networking protocols
summarise WLAN devices and their specification and use.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the networking industry, and include access to:
a site where network installation may be conducted
hardware and software
organisational guidelines
computers
stand-alone and lightweight WLAN controllers and AP
hardware and software LAN/WLAN voice technologies.
Assessors must satisfy NVR/AQTF assessor requirements.