List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance Criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare to conduct acceptance tests | 1.1 Obtain installation and commissioning documents and planning specifications from appropriate personnel to ensure installed optical network is as planned and specified 1.2 Conduct visual inspection of new installation and verify system compliance against relevant legislation, codes, regulations and standards, and accepted industry practice 1.3 Select and obtain required test equipment for suitability of acceptance testing 1.4 Prepare acceptance schedule and test criteria in consultation with appropriate personnel |
2. Conduct acceptance testing | 2.1 Conduct and evaluate performance tests to ensure measurements meet with predetermined specifications and approved operating margins 2.2 Verify performance levels to be within tolerance specifications set in manufacturer’s instructions 2.3 Test protection mechanisms to ensure performance criteria meets specified standard 2.4 Test alarms for satisfactory operation and refer identified problems to appropriate personnel for remedial action 2.5 Record all acceptance test procedures and results |
3. Complete administrative tasks | 3.1 Complete acceptance documentation including recommendations 3.2 Notify appropriate personnel and obtain sign-off |
Evidence of ability to:
verify ‘as built’ installation against installation plans
undertake acceptance and commissioning tests and analysis against specified installation and commissioning documents
complete and submit all acceptance documentation incorporating test procedures, results and recommendations
comply with all related work health and safety (WHS) requirements and work practices.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
identify cabling, terminations and supporting structures that may be encountered in the system under inspection
outline common performance levels and standards
describe electrical and optical properties to be measured
explain health and safety issues appropriate to the work environment under inspection
summarise typical network topologies, switching, routing and transmission techniques
discuss transmission type and signals that may be encountered
identify various test equipment types suitable for tests to be made.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the Telecommunications – Optical Networks field of work and include access to:
testing equipment currently used in industry
relevant regulatory and equipment documentation.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.