List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements | Performance Criteria |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Research mobile network systems and interfaces to interconnected networks | 1.1 Analyse interfaces between cellular mobile network and clients, including public switched telephone network (PSTN) and internet to validate interoperability of individual systems 1.2 Research latest generation of mobile radio systems and develop plan for integration of emerging cellular technologies to meet future demands and client expectations |
2. Analyse constraints imposed by frequency spectrum allocations | 2.1 Analyse techniques to increase system capacity for fixed spectrum bandwidth 2.2 Plan frequency allocation for cellular network from derived specifications 2.3 Develop simulation that plots carrier to interference radiation pattern for given cell geometry in reflective environment |
3. Analyse operations of major subsystems of cellular network | 3.1 Evaluate major subsystem functions of cellular network and analyse subsystem components to determine capability for upgrades 3.2 Research and report how major subsystems interface to other network subsystems 3.3 Simulate transmission path for cellular network |
4. Analyse system capability | 4.1 Simulate traffic flow measurements in microcellular environment 4.2 Produce analytical report on cellular mobile convergence with plan for cellular mobile system integration to existing networks |
Evidence of the ability to:
plan a frequency allocation for a cellular network
analyse techniques to increase system capacity for a fixed spectrum bandwidth
develop a plan for integration of emerging cellular technologies
analyse the interfaces between a mobile network and clients
research and report the interfacing of major subsystems to other network subsystems
produce an analytical report on cellular mobile convergence with a plan for cellular mobile system integration to existing networks.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
evaluate allocations and bandwidth requirements of cellular systems
investigate efficiency and system capacity given the spectrum allocation, number of channels required and grade of service
describe equipment subsystem diagnosis and repair procedures
summarise features and differences between major frequency bands and their allocation of licences
compare features and operating requirements of cellular test equipment
outline key features of cellular mobile radio systems
summarise major element functions of a mobile radio system
explain major frequency bands and their allocation of licences
describe a microcellular system
explain minimising latency
outline network components and their functions
provide a detailed summary of transmission lines, transmitter and receiver architecture
summarise radio spectrum in use, specifying restrictions and characteristics
describe radio frequency (RF) and electromagnetic energy (EME) hazards
investigate and evaluate antenna performance and mobile components, and their impact on mobile spectrum interference
explain spectrum efficiency
describe system configuration procedures
outline testing network components
summarise the types of adjustments that need to be made when measuring cellular transmission
outline the types of networks that will influence the transmission on the radio path and/or transmission line.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances should be typical of those experienced in the telecommunications – radio frequency networks field of work and include access to:
sites on which cellular network analysis, research and simulation may be conducted
test equipment currently used in industry
manufacturer’s and enterprise technical documentation.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.