Assessor Resource

ICTTC008D
Terminate metallic conductor cable

Assessment tool

Version 1.0
Issue Date: March 2024


Not applicable.

This unit applies to all contexts for indoor and outdoor installation within a customer premises and applies to both customer premises cabling and customer premises equipment.

This unit applies to all communications applications whether digital or analogue including telephony, data, video including digital broadcasting, computer networks including LANs and WANs, and multi media.

This unit may be applied to domestic, commercial or industrial installations.

This unit applies to all metallic conductor cable types including coaxial and structured (Category 5 or Category 6, 6A, 7 or 7A,) cabling. It also applies to the joining of cable in a terminating block (in/out block). Specific units of competency apply to the placing, securing and termination of particular cable types and should be used in association with this unit where applicable.

Assessment by a TITAB registered assessor is recommended.

The six unit competency set ICTTC005D , ICTTC006D , ICTTC008D , ICTTC012D , ICTTC017D and ICTTC022D that meets the Australian Communications and Media Authoritys (ACMA) requirements for Cabling Provider Registration (CPR), is generally used as part of a more specialised customer cabling qualification. This set is usually regarded as more suitable for new entrants where limited industry experience has been obtained and forms the major part of specialised qualifications such as ICT20308 Certificate II in Telecommunications Cabling. When these six units are delivered as a set within state/territory funding approved programs, the two benchmark CPR units (ICTTC136C and ICTTC137C ) are not required.

This unit applies to all contexts for indoor and outdoor installation within a customer premises and applies to both customer premises cabling and customer premises equipment.

This unit applies to all communications applications whether digital or analogue including telephony, data, video including digital broadcasting, computer networks including LANs and WANs, and multi media.

This unit may be applied to domestic, commercial or industrial installations.

This unit applies to all metallic conductor cable types including coaxial and structured (Category 5 or Category 6, 6A, 7 or 7A,) cabling. It also applies to the joining of cable in a terminating block (in/out block). Specific units of competency apply to the placing, securing and termination of particular cable types and should be used in association with this unit where applicable.

Assessment by a TITAB registered assessor is recommended.

The six unit competency set ICTTC005D , ICTTC006D , ICTTC008D , ICTTC012D , ICTTC017D and ICTTC022D that meets the Australian Communications and Media Authoritys (ACMA) requirements for Cabling Provider Registration (CPR), is generally used as part of a more specialised customer cabling qualification. This set is usually regarded as more suitable for new entrants where limited industry experience has been obtained and forms the major part of specialised qualifications such as ICT20308 Certificate II in Telecommunications Cabling. When these six units are delivered as a set within state/territory funding approved programs, the two benchmark CPR units (ICTTC136C and ICTTC137C ) are not required.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Nil

Nil


Employability Skills

This unit contains employability skills.

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

demonstration of a minimum of at least one manufacturer's termination system at both frame and outlet locations and at least 1-50 pair cable

ability to read and interpret cable drawings and plans for locations and terminations

accurate application of cable conductor identification codes

application of all related OHS requirements and work practices (including protective clothing and personal safety items)

safe use of general hand and power tools and general equipment normally related to these tasks

correct interpretation and application of related regulations and/or industry codes

interpersonal skills related to clients, employer, supervisors, work associates, team members, other contractors

Context of and specific resources for assessment

Assessment must ensure:

A workplace conducting the operations covered by this competency unit, equipment and resources relevant to the context of the work (See Range Statement) and support from a competent supervisor or mentor.

OR

A simulated environment with similar provisions which conforms to the Assessment Guidelines.

Guidance information for assessment

Access must be provided to appropriate learning and assessment support when required.

Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.

In all cases where practical assessment is used it will be combined with targeted questioning to assess underpinning knowledge.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Select from the following list to suit the learning and assessment context

Codes refer to the Skills and Knowledge Register in Volume 3 of this Training Package that has detailed content guidelines for each code outlined.

CA201 Cable Termination Products: General

CA202 Cable Conductor Identification Codes

CA220 Cable Types

CI210 Communication 2

EL210 AC/DC Basic Theory

OH210 Occupational Health and Safety 2

PS212 Read Plans and Specifications - General

PS213 Cable Record Systems: General

RE210 ACMA Licensing Standards, Rules and Regulations

RE216 Australian Standards and Regulations

TE210 Basic Telephony 2

TO210 Hand and Power Tools

Required knowledge

The relevant required knowledge is articulated in the above guidelines contained in the Skills and Knowledge Register included in this Training Package.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Strategies to manage infrastructure

Appropriate separations, fastening techniques, correct use of cable trays and support systems

Cable termination

May occur at a frame or outlet location

Cable termination:

Is usually done individually

Termination systems:

May be manufacturers proprietary systems

Work site contaminants

Include: dust, water, paint, building debris, asbestos

Cable conductor identification codes

May be: colour coded, banded, numbered, lettered

Record

May be: record cards, record books, cable drawings, cable plans

Site access approval

May be verbal or written

Site security systems

May include: registered entry requirements, electronic surveillance, security clearance

Site requirements

May include: noise control, relationships with other customer activities, presentation, access and egress points

Customers specifications for support systems

May be found in: contract documents, cable plans and designs, specification schedules

Safe working practices

Includes the safe use and handling of: tools and equipment, materials, chemicals and work platforms

Work platforms

May be: ladders, scaffold, scissor lifts ('cherry pickers)

Tools

May be: hand or power and include manufacturers proprietary terminating tools

Manufacturers specifications

May be found in printed instruction leaflets or pre printed on materials or on product packaging

Industry standards

May include regulated or industry codes of practice and include appropriate ACMA technical standards

All cable used

Must be compliant with appropriate ACMA technical standard requirements (eg. for underground, aerial, Category 5 or like Category 6, 6A, 7 or 7A, UTP etc)

All cabling products other than cable must be:

ACMA approved

Remote Power Feed

Applies to telecommunications services which operate at above TNV (Telecommunications Network Voltage)

Relevant legislation, codes, regulations and standards

Include:

Technical Standards AS/ACIF S008:2006, AS/ACIF S009:2006

AS Communications Cabling Manaul (CCM) Volume 1

ACIF Standards and Codes

AS/NZS 3000:2007

AS/NZS 3080:2003

AS/NZS 3084:2003

AS/NZS 3085.1:2004

AS/NZS ISO/IEC 15018:2005

AS/NZS ISO/IEC 24702:2007

AS/NZS IEC 61935.1:2006

AS/NZS IEC 61935.2:2006

AS/NZS ISO/IEC 14763.3:2007

ISO Draft 11801 (International)

Cabling security codes and regulations

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify correct termination requirements for installation 
Select termination system to meet customer performance needs 
Termination system conforms to work specifications and relevant industry standards 
Remove all contaminants from work site that may adversely effect termination 
Work site has adequate visibility to minimise errors and reduce eye strain 
Work site is safe and secure 
All required tools and equipment are available and in a safe working order and adjusted to manufacturers specifications 
Design cable and block location within frame with capacity for expansion where possible 
Segregate incoming and outgoing cables for ease of access and to minimise overlaying and backtracking of cable 
Check environmental conditions are suitable for termination 
Terminating equipment layout is systematic and follows relevant industry codes of practice and standards, and customer requirements where appropriate 
Back-mount or outlet layout conforms to manufacturers specifications 
Layout allows for adequate workspace to ensure ease of access for installation and service purposes 
Remove cable sheath to allow for conductor length and installation requirements 
Handle cable strictly in accordance with manufacturers specifications 
Conductors, sheath and insulation are not damaged during preparation 
Work in a safe manner to manufacturers specifications 
Layer out cable out by reference to manufacturers coding system to ensure correct terminating sequence and unique identification where appropriate 
Fit over voltage protection devices to all cables with metallic component where required 
Install terminating modules to frame in accordance with manufacturers specifications 
Fan cable pairs neatly to termination equipment to facilitate accurate termination 
Terminate cable to manufacturers specifications using correct tool 
Earth cable shield to manufacturers specifications and industry standards 
Confirm that the termination colour code sequence has been followed by visual inspection 
Label cable pairs promptly and clearly to provide for accurate identification in accordance with manufacturers requirements and industry standards 
Update record books and plans to show pair locations in accordance with industry codes of practice 
Clean and adjust all tools and equipment and store in an accessible location 
Remove installation waste and debris from work site and dispose of in accordance with environmental requirements to maintain safe worksite conditions 
Identify the risks posed by contact with Remote Power Feeding services 
Identify Remote Power Feeding services in a range of commonly encountered circumstances inside customer premises 

Forms

Assessment Cover Sheet

ICTTC008D - Terminate metallic conductor cable
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICTTC008D - Terminate metallic conductor cable

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: