List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare for hardware repair and replacement | 1.1 Obtain relevant legislation, codes, regulations and standards for the given work 1.2 Discuss and record details of hardware to be repaired or replaced, and proposed work schedule with the appropriate person at NOC 1.3 Work safely according to relevant safety legislation and company work practices, identifying hazards and using personal protective equipment 1.4 Obtain appropriate replacement hardware and associated documentation 1.5 Inspect network and determine need for repair task 1.6 Obtain tools and check they are in good working order 1.7 Undertake an impact risk assessment of the hardware replacement with the NOC, and prepare for contingencies using contingency plan |
2. Rectify fault by replacing hardware | 2.1 Replace equipment as instructed by the NOC following anti- static precautions in the case of sensitive electronic equipment and work health and safety (WHS) and environmental requirements 2.2 Inform NOC if problems occur with hardware replacement so escalation may commence and contingency plan initiated 2.3 Test replacement hardware to ensure satisfactory functionality |
3. Clean up worksite and complete administrative work | 3.1 Remove waste and debris from worksite and dispose of according to environmental requirements and restore work area to NOC satisfaction 3.2 Recover faulty equipment and return to appropriate point for disposal or refurbishment 3.3 Complete documentation, update fault records and make recommendations according to the enterprise quality assurance system 3.4 Notify appropriate person at the NOC of job completion and obtain sign-off |
Evidence of ability to:
rectify fault as instructed by Network Operations Centre (NOC), following work health and safety (WHS) requirements and anti-static precautions
replace telecommunications hardware within service assurance guidelines according to enterprise procedures
update fault records database according to enterprise procedures
liaise with appropriate personnel in the NOC for information and reporting purposes.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
explain application of direct current (DC) and alternating current (AC) electrical principles
describe static electricity and its importance in testing and working with telecommunications equipment
describe behaviour of faulty network elements including symptoms and impact on network
interpret test results and network element or system specifications
describe the operation and purpose of testing equipment
summarise common telecommunications hardware and network structures
outline performance testing and fault-finding techniques of telecommunications networks
explain systematic and logical fault-finding
list types of power sources used in telecommunications networks
select and describe appropriate test equipment used to undertake fault finding procedures.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances should be typical of those experienced in the telecommunications networks engineering field of work and include access to:
a suitable site to replace telecommunications network hardware
a range of hardware currently used in industry
a range of general and test equipment required for testing telecommunications network hardware.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.