List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare to conduct acceptance testing | 1.1 Obtain installation and commissioning documents and planning specifications from appropriate personnel to ensure the installed system is as planned and specified 1.2 Visually inspect new installation and verify compliance of the system against relevant legislation, codes, regulations and standards 1.3 Select and obtain required test equipment for suitability of acceptance testing 1.4 Prepare acceptance schedule and test criteria in consultation with appropriate personnel |
2. Conduct acceptance testing | 2.1 Undertake and analyse performance tests safely to ensure measurements meet with predetermined specifications and approved operating margins 2.2 Verify performance levels to within tolerance specifications 2.3 Test protection mechanisms to ensure performance criteria meets the specified standard 2.4 Test alarms for satisfactory operation 2.5 Refer identified problems to appropriate personnel for remedial action 2.6 Record all acceptance test procedures and results |
3. Complete administrative tasks | 3.1 Complete acceptance documentation including recommendations 3.2 Notify appropriate personnel and obtain sign-off |
Evidence of ability to:
inspect new installation and verify compliance against installation plans
prepare acceptance schedule and test criteria
undertake relevant acceptance tests and analysis
comply with specified performance criteria, related work health and safety (WHS) requirements and work practices.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
outline cabling, terminations and supporting structures that may be encountered in the system under inspection
explain common performance levels and standards
explain electrical and or optical properties to be measured
consider WHS issues that impact testing systems and equipment
evaluate typical network topologies, switching, routing and transmission techniques
evaluate transmission type and signals that may be encountered
explore various types of test equipment suitable for testing to be performed.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances should be typical of those experienced in the telecommunications networks engineering field of work and include access to:
sites where acceptance tests may be conducted
testing equipment currently used in industry
relevant regulatory and equipment documentation.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.