Assessor Resource

LMFUP2005B
Develop cutting plan and cut single layer upholstery fabric

Assessment tool

Version 1.0
Issue Date: May 2024


This unit covers the competency to develop a cutting plan, measure out and cut single layer upholstery fabrics.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Nil

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence

Interpret work order and locate and apply relevant information

Apply safe handling practices for equipment, products and materials

Identify materials used and any special marking out requirements

Follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

maintain required production output and product quality

Develop cutting plan, measure accurately, mark out and cut upholstery fabric quantities, minimising waste and producing consistent quality items for at least five different types of material or products (at least one of which should be patterned)

Work effectively with others

Modify activities to cater for variations in workplace contexts and environment

Resource implications

Work orders, fabrics, tape measure, cutting table, cutting machines, cutting knives and blades, scissors and workplace procedures

Method of assessment

Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.

Assessment should be by direct observation of tasks and questioning on underpinning knowledge.

Assessment should be conducted over time and may be in conjunction with assessment of other units of competency which form a part of the job role.

Context of assessment

Assessment may occur on the job or in a workplace simulated facility with relevant resilient sheet installation equipment, materials, work instructions and deadlines.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

collect, organise and understand information related to work orders, basic plans and safety procedures

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

plan and organise activities including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, workflow interruptions or wastage

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

use mathematical ideas and techniques to correctly complete measurements, estimate fabric requirements and estimate other material requirements

use pre-checking and inspection techniques to anticipate cutting problems, avoid re-working and wastage

use the limited workplace technology related to planning and cutting upholstery fabric including tools, equipment, calculators and measuring devices.

Required knowledge

work requirements including workplace standards

workflow in relation to planning and cutting upholstery fabric

fabric types, common faults and inspection procedures

design features of the finished items in relation to attractive use of fabric patterns

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Unit scope

This unit applies to the cutting of upholstered fabrics from measurements and instructions. It does not apply to cutting from patterns.

Fabrics may be plain or patterned and include, but are not limited to:

velour

velvet

tapestry

damask

linen

cotton

Unit context

Workplace health and safety requirements may include OHS legislation, material safety management systems, hazardous and dangerous goods codes and safe operating procedures

Work is carried out in accordance with statutory requirements, relevant health regulations, environmental legislation, manual handling procedures and organisation insurance requirements

Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the planning and the cutting of upholstery fabric

Tools and equipment may include, but are not limited to:

cutting equipment including scissors and cutting machines; knives and/or blades

hot knife (for acrylics)

measuring and calculating equipment including tapes

rulers

calculators

computers and cutting table

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation, regulations and enterprise practices and procedures. It may include:

glasses/goggles

hair net

ear muffs/plugs

gloves

footwear and protective clothing

Information and procedures

Machine manufacturer specifications and operational procedures

Workplace procedures relating to the setting and operation of machinery

Work instructions. These include:

job sheets

cutting lists

plans

drawings and designs

Workplace procedures relating to reporting and communication

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Required fabrics, number of items to be cut and required equipment are identified 
Fabric sizes to be cut are identified from work order plus any required allowances 
Workplace health and safety requirements, including personal protection needs, are observed throughout the work. 
Suitable work area is selected, prepared and cleaned of any contaminants 
Work sequence is planned 
Suitable scissors, cutting machines, knives and/or blades are selected and checked prior to use for appropriate sharpness, set, operation and safe condition 
Fabrics are selected in accordance with work order and laid out smooth and square 
Fabrics are inspected for flaws and appropriate finish 
Nap/pile direction, pattern matches and face of the materials are identified 
Tools and equipment are checked for operation 
Fabric is measured and marked, including registration points, in accordance with workplace practices 
Cutting plan is developed in accordance with workplace procedures 
Fabric is cut in accordance with manufacturers' instructions and/or workplace procedures 
Problems are notified following workplace procedures 
Cut item is inspected against work requirement with unsatisfactory items being reprocessed in accordance with workplace procedures 
Cutting is completed with cut out materials top edge marked, wrapped, identified/labelled, handled and stored as required by workplace procedures 
Workplace required documentation is completed in accordance with workplace procedures 
Unused fabric and waste are collected for recycling/reuse in accordance with workplace procedures 
Tools and equipment are maintained and work area is cleaned in accordance with workplace procedures 

Forms

Assessment Cover Sheet

LMFUP2005B - Develop cutting plan and cut single layer upholstery fabric
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMFUP2005B - Develop cutting plan and cut single layer upholstery fabric

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: