Assessor Resource

LMTFD3004B
Draw a trade drawing for fashion design

Assessment tool

Version 1.0
Issue Date: May 2024


The unit applies to the pattern making or design room, where accurate trade or technical drawings are required to interpret and clarify a garment design.

Work is supervised may be conducted in small to large scale enterprises and may involve individual and team-related activities.

The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:

requirements prescribed by legislation, awards agreements and conditions of employment

standard operating procedures

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control, and recycling

This unit requires skills in planning and organising, problem solving and communication to interpret specifications and produce trade drawings. Self management skills are required to ensure drawing meets quality standards.

This unit covers the skills and knowledge to draw an accurate trade or technical drawing based on specifications and a design.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisites

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence

Demonstrates skills and knowledge to:

prepare workstation before commencing drawing

use appropriate tools and equipment to produce working drawing

applying all quality criteria, such as dimension and neatness, in the completion of the working drawing

conveying all necessary instructions/information by the appropriate use of notes on the drawing

apply OHS practices in work operations

maintain accurate records

accurately draw trade drawings of a range of garments as detailed in the design brief or specifications

accurately label drawings with appropriate notes relating to construction and design features

demonstrate trade drawings in proportion and technically correct, with all details, including front and back view, shown

Consistency in performance

Consistently applies skills and knowledge when:

organising work

completing tasks

identifying improvements

using workplace practices

using OHS practices

recording and reporting accidents and incidents

assessing operational readiness of equipment used and work processes

recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

completing work systematically with attention to detail without damage to goods and equipment

Resource implications

Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment

Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment

This unit may be assessed independently or in combination with other relevant units.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Demonstrates knowledge of:

pattern making and design terminology

style features

fabric performance characteristics

quality standards

sequence of operations

OHS practices, including hazard identification and control measures

quality practices

workplace practices

recording and reporting practices

Demonstrates skills to:

ability to draw lines freehand to create shapes

read, interpret and follow information on work specifications, standard operating procedures and work instructions, and other reference material

maintain accurate records

communicate within the workplace

sequence operations

meet specifications

clarify and check task-related information

carry out work according to OHS practices

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Legislative/regulatory requirements

All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.

Drawing tools and equipment include:

paper

layout pad

pencils - mechanical may be used - various grades

pencil sharpener

kneadable eraser

ruler

black felt tip pens

portfolios

templates

OHS practices

OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit and may include:

manual handling techniques

standard operating procedures

personal protective equipment

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

other OHS practices relevant to the job and enterprise

Garments may include:

skirts

trousers/pants

shirts/blouses

dresses

coats

lingerie

Garment features may include:

fitting and seam lines

style lines

yokes, gores and panels

necklines

sleeves

collars

zips and buttons

pockets

waistbands

Details and special effects may include:

top stitching and edge stitching

pin tucks and tucks

frills and gathers

pleats

drapes

fabric effects - lace, fur, knitwear

bows and ties

quilting

elastication

Trade drawings are:

also known as working drawings

accurate analytical drawings of garments that are detailed to show how the garment is constructed and finished

are used by designers and patternmakers to inform production - part of specification sheets

Quality criteria includes:

proportion

perspective

symmetry and balance

fabric performance

detailing

neatness

Templates may include:

front and back full body view - ladies, men's and children's

upper torso/lower torso

swimwear/lingerie

full body with arms and legs extended from torso

3/4 turned

Lines may include:

straight, angled, curved, pointed, dotted, dashed and circled

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Drawing tools and equipment are selected. 
Drawing tools and equipment are prepared for use. 
Workbench and seating are set up according to OHS practices. 
Tools and equipment are set out to facilitate effective work practice. 
Trade drawing requirements are investigated and identified from Criteria are design brief. 
Specifications are identified and followed as required. 
Style of garment is identified. 
Garment features required to complete trade drawing are identified. 
Detailing and special effects are identified for use on trade drawing. 
Quality criteria are used in trade drawing. 
Template to draw trade drawing is selected. 
Lines are drawn accurately to complete drawing, using a ruler where necessary. 
Working drawing is produced to correctly represent a pattern piece or garment. 
Relevant parts of drawing are identified and labelled. 
Trade drawing is inspected against quality standards. 
Any changes or adjustments to trade drawing are carried out as required. 
Documentation relating to trade drawing is completed and stored. 

Forms

Assessment Cover Sheet

LMTFD3004B - Draw a trade drawing for fashion design
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMTFD3004B - Draw a trade drawing for fashion design

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: