Assessor Resource

LMTFD5009B
Cost design production

Assessment tool

Version 1.0
Issue Date: April 2024


The unit applies to costing products within the fashion design industry, while deciding on the most cost-effective mechanism for the production to occur. In-house, cut, make and trim (CMT) and offshore production must be investigated and competency in costing all three production options must be achieved. All work to be costed will be carried out according to workplace practices and procedures applying at the point of production.

Work may be conducted in small to large scale enterprises and may involve individual and team-related activities.

The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:

requirements prescribed by legislation, awards agreements and conditions of employment

standard operating procedures

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control, and recycling

This unit requires skills in planning and organising and communication skills in order to determine, calculate and document costs for fashion products. Problem solving and numeracy skills are required to conduct costing calculations.

This unit covers the skills and knowledge to cost products for volume production within the fashion design industry.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisites

LMTFD4004B

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence

Demonstrates skills and knowledge to:

assess and complete all required information on costing sheet

complete at least three different costing sheets for three different design production options

apply all quality criteria in completion of costing sheet

apply OHS practices in work operations

maintain accurate records

accurately draw trade sketches of a range of garments as detailed in the design brief or specifications

accurately label sketches with appropriate notes relating to construction and design features

Consistency in performance

Consistently applies skills and knowledge when:

organising work

completing tasks

identifying improvements

using workplace practices

using OHS practices

recording and reporting accidents and incidents

assessing operational readiness of equipment used and work processes

recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

completing work systematically with attention to detail without damage to goods and equipment

Resource implications

Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment

Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment

This unit may be assessed independently or in combination with other relevant units.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Demonstrates knowledge of:

structure of costing sheets

industry standards for costing specifications

patternmaking and design terminology

style features

quality standards

sequence of operations

OHS practices, including hazard identification and control measures

quality practices

workplace practices

recording and reporting practices

Demonstrates skills to:

draw trade sketches and drawings

access industry standards

calculate and compare costs

read, interpret and follow information on work specifications, standard operating procedures and work instructions, and other reference material

maintain accurate records

communicate within the workplace

sequence operations

meet specifications

clarify and check task-related information

carry out work according to OHS practices

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Legislative/regulatory requirements

All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.

Production options may include:

in-house production

cut, make and trim suppliers

offshore production

Costs may include:

freight

tariffs/duties

wastage

wages or labour

materials

equipment usage and maintenance

Cost benefits may include:

reduced wastage

greater control over production schedule

reduced overheads

flexible use of labour

cheaper labour

greater flexibility

Cost negatives may include:

high overheads

freight/shipping

lack of quality control

longer lead times

larger minimum orders

Variables may include:

labour availability

availability of materials and equipment

transportation reliability

exchange rate changes

complexity of design production

OHS practices

OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit and may include:

manual handling techniques

standard operating procedures

personal protective equipment

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

other OHS practices relevant to the job and enterprise

Differences may include:

quality control

style/design features

choice of fabrics

using of linings

choice of trims

extras, e.g. pleating, embroidery

costs

machinery and equipment requirements

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Different production options are identified. 
Features of production options are identified 
Cost benefits of each option are identified and compared. 
Cost negatives of each option are identified and compared. 
Previous production records are reviewed and appropriate personnel are consulted, to determine costing efficiency of production options. 
Variables which impact on design production costs are identified. 
OHS practices are considered in costing. 
Target market for end products in design production is identified. 
Differences between short-run or design production and large scale volume production are identified and compared. 
Quality industry standards for design production are identified. 
Costing sheet is completed for an in-house design production run. 
Costing sheet is completed for a cut, make and trim production run. 
Costing sheet is completed for an offshore production run. 
Costing sheets are used to compare and select most appropriate design production option. 
Quality standards of work and received materials are assessed. 

Forms

Assessment Cover Sheet

LMTFD5009B - Cost design production
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMTFD5009B - Cost design production

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: