Assessor Resource

LMTTX2002B
Prepare yarn for textile manufacturing

Assessment tool

Version 1.0
Issue Date: May 2024


The unit applies to the preparation, operation, monitoring and adjusting of machines and equipment used to thread, spool, wind, size and beam yarn to be used for production operations such as weaving, knitting or tufting.

If creeling is undertaken then the unit LMTTX2005A Perform creeling operations should be undertaken instead of this unit.

Work is conducted according to defined procedures.

Work may be conducted in small to large scale enterprises and may involve individual and team activities.

The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:

requirements prescribed by legislation, awards, agreements and conditions of employment

standard operating procedures

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control, and recycling

This unit requires the application of skills associated with planning and organising to prepare textiles for processing. Problem solving skills are required to ensure materials conform to requirements and identify any processing problems. Communication skills are used to refer to and complete required documentation. Self management skills are used to ensure safe use of technology and conformance of own work to quality standards.

This unit covers the skills and knowledge to prepare yarn for textile production processes.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisites

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence to be considered

Demonstrates skills and knowledge to:

check machine settings to meet production requirements

operate and monitor machine involving defined procedures and methods

make minor adjustments

check product against quality standards

load and unload products

complete records accurately and completely

apply OHS practices in work operations

Consistency in performance

Consistently applies skills and knowledge when:

organising work

completing tasks according to instructions

working systematically with attention to detail according to instructions

identifying improvements and avoiding damage

using workplace practices

using OHS practices

recording and reporting accidents and incidents

assessing operational readiness of equipment

recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications

Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment

Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment

This unit may be assessed independently or in combination with other relevant units.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Demonstrates knowledge of:

procedures and guidelines for safe operation of machines

typical fault conditions and related fault finding procedures

machine maintenance and repair techniques

technical specifications manuals

quality standards and practices

OHS practices, including hazard identification and control measures

workplace practices

recording and reporting practices

Demonstrates skills to:

check machine safety equipment and report any faults

perform calculations as required

load and unload materials according to machine and workplace practices

start and stop machines according to specifications

monitor machine operations including machine production readings

recognise, rectify and report machine faults or problems as required

clean machines as required

check machine maintenance records

recognise fault conditions

confirm compliance to operational specifications

read, interpret and follow information on work specifications, standard operating procedures and work instructions, and other reference material

maintain accurate records

communicate within the workplace

sequence operations

meet specifications

clarify and check task-related information

carry out work according to OHS practices

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Legislative/regulatory requirements

All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.

Machines include

warping machine

beaming machine

winding machine

sizing machine

threading machine

spooling machine

knitting machine

OHS practices

OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:

manual handling techniques

standard operating procedures

personal protective equipment

safe materials handling

taking of rest breaks

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

environmental practices

Machine settings may include

yarn type and quality

sections

lubrication

height

tension

speed

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Production specifications are checked to identify requirements for yarn quantity, quality or colour. 
Yarn batch or job is checked to ensure conformity to specifications. 
Non-conforming materials are reported. 
Yarn is loaded onto machine. 
Machine settings are calculated and adjusted to meet production requirements. 
Leasing reed or other mechanisms are set according to specifications where necessary. 
Yarn is threaded onto machine as necessary. 
Machine is operated according to OHS practices. 
Operation and yarn are monitored. 
Yarn breaks are repaired where necessary. 
Faults are corrected where necessary to meet specified requirements and are reported. 
Major machine or product faults are reported. 
Product is checked against quality standards. 
Product is unloaded or removed according to manufacturer specifications. 
Product is despatched to next process where necessary. 
Cleaning of area is completed to ensure work environment is maintained in a safe and productive manner. 
Production records and other documentation are accurately completed. 

Forms

Assessment Cover Sheet

LMTTX2002B - Prepare yarn for textile manufacturing
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMTTX2002B - Prepare yarn for textile manufacturing

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: