List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1 | Calculate stability | 1.1 | Vessel stability data book is accessed and checked for endorsement |
1.2 | Data is interpreted to determine vessel safety parameters |
1.3 | Stability is accurately calculated using data extracted from vessel stability data book |
1.4 | Stability calculations are checked to ensure they correlate with data set out in vessel stability book |
1.5 | Spurious or incorrect information is recognised and recalculated |
1.6 | Trim, draughts and list are adjusted as required |
1.7 | Stability calculations are conducted at a time, frequency and scope appropriate to voyage |
2 | Manage weight distribution | 2.1 | Stability calculations are used to plan weight distribution to ensure assigned load line conditions are not exceeded |
2.2 | Weight distribution is controlled to maintain vessel within acceptable stability and stress limits for loading operation and at all stages of voyage |
2.3 | Appropriate action is taken when weight distribution is compromising vessel safety |
3 | Maintain records of stability management | 3.1 | Data and information related to stability management is accurately recorded |
3.2 | Data and information related to stability management is filed and stored according to organisational procedures |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:
applying knowledge of stability, trim and stress tables, diagrams and stress calculating equipment
carrying out calculations required when determining vessel stability and trim
managing the loading and weight distribution of a vessel to ensure assigned load line conditions are not exceeded
managing vessel stability in a range of conditions
reading and interpreting vessel specifications and design drawings
recognising problems affecting vessel stability and trim.
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
calculation of vessels stability using the inclining experiment
effects of angle of loll
effects of beam and form coefficient on the stability of a vessel
effects of density of sea water on the draught and freeboard of a vessel
effects of free surface on the stability of a vessel
features of the load-line and draught marks of a vessel and methods for performing related calculations
fundamental actions to be taken in the event of partial loss of intact buoyancy
fundamentals of watertight integrity
principal stresses that act on the structure of a vessel
principal structural members of a vessel and the proper names for various parts
problems related to the control of trim, stability and stresses of vessels and appropriate action and solutions
sections of the International Maritime Organization (IMO), Standards of Training, Certification & Watchkeeping (STCW) and Australian Maritime Safety Authority (AMSA) Marine Orders related to intact stability criteria
stability, trim and stress tables, diagrams and stress calculating equipment
theory and calculations of vessel stability and dynamics
use of computer programs in calculating stability
work health and safety (WHS)/occupational health and safety (OHS) requirements and work practices.
Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.
Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Resources for assessment must include access to:
tools, equipment, machinery, materials and personal protective equipment currently used in industry
applicable documentation such as legislation, regulations, codes of practice, workplace procedures and operational manuals
range of relevant exercises, case studies and/or simulations.