List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Safely dock vessel into dry dock or slipway | 1.1 | Slipway or dry dock particulars are assessed for suitability for dry docking or slipping vessel |
1.2 | Ship supports, scaffolding and other service systems are assessed for compatibility to dry dock or slipway particulars |
1.3 | Plan is prepared for docking or slipping vessel |
1.4 | Cradle, supports and/or slings are prepared prior to slipping vessel |
1.5 | Vessel is made ready for slipping according to organisational and dry dock requirements |
1.6 | Vessel is slipped according to environmental safe work practices and safety instructions |
2 | Inspect underwater hull, equipment and fittings | 2.1 | Checks of vessel hull, equipment and fittings are carried out according to maintenance schedules and vessel manufacturer instructions |
2.2 | Deterioration in vessel structure, equipment and fittings is identified |
2.3 | Checks on watertight integrity of vessel are carried out according to organisational procedures and safety regulations |
2.4 | Damage to watertight integrity is identified and appropriate action is determined |
2.5 | Listed work plan is prepared to rectify all identified faults |
2.6 | Surveyor or authorised person is engaged to ensure appropriate certification can be issued or endorsed on completion of work, where applicable |
3 | Select and use maintenance equipment and materials | 3.1 | Tools and equipment are correctly identified, selected and used |
3.2 | Maintenance materials are obtained, prepared and used according to organisational procedures and manufacturer instructions |
3.3 | Environmental procedures are followed and waste from cleaning and maintenance tasks is collected, treated and disposed of, or recycled, according to organisational procedures |
3.4 | Malfunctions, faults, wear or damage to tools are reported according to organisational procedures |
3.5 | Equipment and tools are cleaned, returned to operating order and stored according to organisational procedures and manufacturer instructions |
3.6 | Chemicals are used and stored according to organisational procedures and manufacturer instructions |
3.7 | Paint is used and stored according to organisational procedures and manufacturer instructions |
4 | Carry out required maintenance and repairs to hull, equipment and fittings | 4.1 | Suitable personal protective clothing is selected and used according to work health and safety (WHS)/occupational health and safety (OHS) requirements |
4.2 | Permits for hot work, confined space entry and other high risk activities are completed according to organisational and regulatory requirements |
4.3 | Faults and imperfections in painted surfaces are repaired according to organisational procedures |
4.4 | Weathered surfaces are restored using cleaners and liquid abrasives |
4.5 | Lubricants are applied to moving parts of vessel underwater equipment according to manufacturer instructions |
4.6 | Corrosion control is carried out according to organisational procedures and manufacturer instructions |
4.7 | Action to ensure watertight integrity is completed |
4.8 | Routine adjustments are made to equipment and fittings according to manufacturer instructions |
4.9 | Faulty vessel machinery and fittings are identified and replacement procedures are implemented |
5 | Supervise crew completing maintenance and repairs to hull, equipment and fittings | 5.1 | Workload is organised in order of priority, taking into consideration all listed work including survey work |
5.2 | Maintenance tasks are allocated to appropriate crew members with consideration of individual experience and qualifications |
5.3 | Crew members are clearly briefed on their responsibility, maintenance tasks and WHS/OHS requirements |
5.4 | Guidance is provided appropriate to the maintenance task and individual experience |
5.5 | Completed work is checked to ensure maintenance is performed according to dry dock plan and organisational procedures |
6 | Complete duties prior to refloating | 6.1 | Final internal inspection of vessel is conducted to ensure all listed work is completed to a satisfactory standard |
6.2 | External inspection of hull and underside is carried out to ensure all listed work is completed to a satisfactory standard |
6.3 | All tank plugs that have been drawn are replaced |
6.4 | Crew are instructed on activities to be completed to make vessel ready for sailing |
6.5 | Check is conducted to ensure a full set of tank soundings has been taken and the distribution of fresh water, fuel and lubricating oil are according to soundings taken on arrival |
6.6 | Tank quantities are applied to complete stability check to ensure that the vessel has an acceptable GM once she floats clear of the keel blocks or slipway |
6.7 | All hatch covers are closed and watertight integrity of uppermost deck is assured |
6.8 | Anchors and cables are heaved up and stowed correctly, and all shore pipelines and powerlines are disconnected |
6.9 | Confirmation that refloating can proceed is agreed with person in charge of refloating operation |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:
completing maintenance records
developing effective planning documents
implementing safe and environmentally responsible work practices
liaising with surveyor to ensure work is carried out to regulatory requirements for the issue or endorsement of relevant certificates
reading, interpreting and applying:
operating and service manuals for the slipping/docking of a vessel and the maintenance of its hull
manufacturer instructions including all WHS/OHS requirements and safety data sheets (SDS)/material safety data sheets (MSDS)
recognising faulty equipment
recognising hull damage and deterioration, and taking appropriate actioning according to organisational procedures
selecting and using correct tools and equipment for maintenance task.
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
basic stability and stability terms
component parts, operation and routine maintenance requirements of vessel equipment and fittings
equipment cleaning and preservation techniques
maintenance hazards and problems
nature and causes of corrosion of marine surfaces and structures, and the available methods for its control
organisational procedures for cleaning and maintenance
paint types and applications
preservatives and finishes used in marine maintenance and the related procedures for their handling, preparation, application and storage
principal features of structure of vessels
principles and procedures of lubrication as they relate to underwater vessel equipment and fittings
procedures for:
working in confined spaces
initiating and coordinating repair and/or replacement of underwater equipment and fittings
checking and inspecting vessel hull as part of routine maintenance procedures
regulatory certification requirements
relevant sections of state and territory regulations, National Standard for Commercial Vessels (NSCV) Code and Uniform Shipping Laws (USL) Code dealing with Master responsibilities
relevant WHS/OHS and pollution control legislation
rust treatment
slipping and docking procedures suitable for various types of hull forms
stability as it relates to docking or slipping operation and refloating
types, characteristics and functions of:
underwater vessel machinery and equipment
equipment/tools used in cleaning and maintenance.
Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.
Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Resources for assessment must include access to:
tools, equipment, machinery, materials and personal protective equipment currently used in industry
applicable documentation such as legislation, regulations, codes of practice, workplace procedures and operational manuals
range of relevant exercises, case studies and/or simulations.