Assessor Resource

MARB010
Plan and supervise routine maintenance on a vessel up to 80 metres

Assessment tool

Version 1.0
Issue Date: March 2024


This unit involves the skills and knowledge required to implement a maintenance program for a vessel up to 80 metres.

This unit applies to people working in the maritime industry on a range of vessels up to 80 metres.

This unit has links to legislative and certification requirements.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Develop maintenance program

1.1

Planned maintenance system is accessed to establish maintenance requirements for vessel

1.2

Maintenance program for vessel is developed to meet requirements of planned maintenance system

1.3

Maintenance schedules and budgets are identified

1.4

Suggestions that support effective implementation of maintenance program are offered according to organisational procedures

1.5

Strategies to minimise impact of maintenance activities on vessel operations are identified

2

Implement maintenance program

2.1

Routine maintenance activities are proposed and prioritised in conjunction with others involved in or affected by maintenance work

2.2

Routine maintenance activities are allocated within scheduled timeframes and budgets according to organisational procedures

2.3

Vessel operations are maintained where possible without interruption

2.4

Safety of crew is maintained at all times according to relevant legislation and organisational procedures

2.5

Requests for assistance from crew to complete maintenance activities are responded to promptly

3

Identify failed or unsafe machinery and equipment

3.1

Faulty machinery and equipment is identified and clear and noticeable warning signs are erected according to organisational procedures

3.2

Failed or unsafe machinery and equipment is assessed according to organisational procedures

3.3

Repairs are allocated to appropriate crew members according to organisational procedures

3.4

Unsafe machinery and equipment which cannot be repaired is promptly tagged and isolated according to organisational procedures

3.5

Unsafe machinery and equipment is promptly reported according to organisational procedures

3.6

Reports on all repair work undertaken are completed according to organisational procedures

4

Monitor supplies

4.1

Supply and stock levels are maintained to ensure ongoing availability

4.2

Management of supplies is undertaken according to organisational procedures

4.3

Supply and stock levels are reconciled and any discrepancies are rectified or reported

4.4

Supply records are maintained according to organisational procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

effectively liaising with internal and external authorities/agencies

initiating timely action in response to defects or damage

interpreting planned maintenance system to determine maintenance requirements

managing maintenance of vessel

monitoring selection and use of supplies involved in maintenance of vessel

preparing reports on outcomes of inspection and maintenance activities

reading and interpreting safety data sheets (SDS)/material safety data sheets (MSDS)

reading and interpreting vessel, equipment and machinery specifications, drawings, operational manuals and diagrams

taking appropriate precautions to prevent pollution of marine environment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

elements of ship structure crucial to the safety of the ship

fundamental principles of vessel construction

maintenance records that must be maintained on vessel to meet organisational and statutory requirements

nature and causes of corrosion of marine surfaces and structures, and available means for control

principal structural components

procedures for initiation and coordination of repair and/or replacement procedures on board vessel

relevant laws and regulations including work health and safety (WHS)/occupational health and safety (OHS) and pollution control legislation

slipping and docking procedures suitable for various types of hull forms

typical problems related to maintenance of vessels and appropriate actions and solutions.

Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

tools, equipment, machinery, materials and personal protective equipment currently used in industry

applicable documentation such as legislation, regulations, codes of practice, workplace procedures and operational manuals

range of relevant exercises, case studies and/or simulations.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Develop maintenance program

1.1

Planned maintenance system is accessed to establish maintenance requirements for vessel

1.2

Maintenance program for vessel is developed to meet requirements of planned maintenance system

1.3

Maintenance schedules and budgets are identified

1.4

Suggestions that support effective implementation of maintenance program are offered according to organisational procedures

1.5

Strategies to minimise impact of maintenance activities on vessel operations are identified

2

Implement maintenance program

2.1

Routine maintenance activities are proposed and prioritised in conjunction with others involved in or affected by maintenance work

2.2

Routine maintenance activities are allocated within scheduled timeframes and budgets according to organisational procedures

2.3

Vessel operations are maintained where possible without interruption

2.4

Safety of crew is maintained at all times according to relevant legislation and organisational procedures

2.5

Requests for assistance from crew to complete maintenance activities are responded to promptly

3

Identify failed or unsafe machinery and equipment

3.1

Faulty machinery and equipment is identified and clear and noticeable warning signs are erected according to organisational procedures

3.2

Failed or unsafe machinery and equipment is assessed according to organisational procedures

3.3

Repairs are allocated to appropriate crew members according to organisational procedures

3.4

Unsafe machinery and equipment which cannot be repaired is promptly tagged and isolated according to organisational procedures

3.5

Unsafe machinery and equipment is promptly reported according to organisational procedures

3.6

Reports on all repair work undertaken are completed according to organisational procedures

4

Monitor supplies

4.1

Supply and stock levels are maintained to ensure ongoing availability

4.2

Management of supplies is undertaken according to organisational procedures

4.3

Supply and stock levels are reconciled and any discrepancies are rectified or reported

4.4

Supply records are maintained according to organisational procedures

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Planned maintenance system must include:

anchoring equipment

communications equipment

compliance with applicable mandatory rules and regulations, including work health and safety (WHS)/occupational health and safety (OHS) and environment protection legislation

continuous improvement and review procedures

document control procedures

firefighting equipment

identifying hazards and risk management

lifesaving equipment

navigation equipment

procedures for updating and correcting charts, publications and electronic chart information

provision of safe practices in vessel operation and a safe working environment

reference to applicable codes, guidelines and standards

steering gear

systems for recording completed maintenance schedules, including identification of defective equipment and rectification of defects

Maintenance program must include:

lines of communication and relationship between vessel and owner

periodic survey requirements

procedure for programmed maintenance of hull and machinery

regular inspection of all equipment referred to in planned maintenance system

routine maintenance as contained in manufacturer instruction manuals and drawings

safety and environmental policy

Routine maintenance activities include one or more of the following:

checking life saving appliances

inspecting breathing apparatus

navigational equipment

operation of emergency firefighting equipment including fire hoses and nozzles

servicing equipment as required by service manuals and manufacturer instructions relating to vessel equipment

testing communication equipment, including distress calling

testing lifting equipment

Machinery and equipment includes one or more of the following:

fire pumps

navigational equipment

steering gear and emergency steering gear

winches and windlasses

Management of supplies include one or more of the following:

issue

purchase

receipt

stock control

storage

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

effectively liaising with internal and external authorities/agencies

initiating timely action in response to defects or damage

interpreting planned maintenance system to determine maintenance requirements

managing maintenance of vessel

monitoring selection and use of supplies involved in maintenance of vessel

preparing reports on outcomes of inspection and maintenance activities

reading and interpreting safety data sheets (SDS)/material safety data sheets (MSDS)

reading and interpreting vessel, equipment and machinery specifications, drawings, operational manuals and diagrams

taking appropriate precautions to prevent pollution of marine environment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

elements of ship structure crucial to the safety of the ship

fundamental principles of vessel construction

maintenance records that must be maintained on vessel to meet organisational and statutory requirements

nature and causes of corrosion of marine surfaces and structures, and available means for control

principal structural components

procedures for initiation and coordination of repair and/or replacement procedures on board vessel

relevant laws and regulations including work health and safety (WHS)/occupational health and safety (OHS) and pollution control legislation

slipping and docking procedures suitable for various types of hull forms

typical problems related to maintenance of vessels and appropriate actions and solutions.

Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

tools, equipment, machinery, materials and personal protective equipment currently used in industry

applicable documentation such as legislation, regulations, codes of practice, workplace procedures and operational manuals

range of relevant exercises, case studies and/or simulations.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Planned maintenance system is accessed to establish maintenance requirements for vessel 
Maintenance program for vessel is developed to meet requirements of planned maintenance system 
Maintenance schedules and budgets are identified 
Suggestions that support effective implementation of maintenance program are offered according to organisational procedures 
Strategies to minimise impact of maintenance activities on vessel operations are identified 
Routine maintenance activities are proposed and prioritised in conjunction with others involved in or affected by maintenance work 
Routine maintenance activities are allocated within scheduled timeframes and budgets according to organisational procedures 
Vessel operations are maintained where possible without interruption 
Safety of crew is maintained at all times according to relevant legislation and organisational procedures 
Requests for assistance from crew to complete maintenance activities are responded to promptly 
Faulty machinery and equipment is identified and clear and noticeable warning signs are erected according to organisational procedures 
Failed or unsafe machinery and equipment is assessed according to organisational procedures 
Repairs are allocated to appropriate crew members according to organisational procedures 
Unsafe machinery and equipment which cannot be repaired is promptly tagged and isolated according to organisational procedures 
Unsafe machinery and equipment is promptly reported according to organisational procedures 
Reports on all repair work undertaken are completed according to organisational procedures 
Supply and stock levels are maintained to ensure ongoing availability 
Management of supplies is undertaken according to organisational procedures 
Supply and stock levels are reconciled and any discrepancies are rectified or reported 
Supply records are maintained according to organisational procedures 

Forms

Assessment Cover Sheet

MARB010 - Plan and supervise routine maintenance on a vessel up to 80 metres
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MARB010 - Plan and supervise routine maintenance on a vessel up to 80 metres

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: