Assessor Resource

MARL027
Demonstrate intermediate knowledge of marine diesel engines and systems

Assessment tool

Version 1.0
Issue Date: April 2024


This unit involves the skills and knowledge required to operate and maintain marine diesel engines and systems on a commercial vessel. This includes evaluating diesel fuel systems, methods of diesel engine cooling, diesel engine lubrication requirements, propulsion methods and faults using combustion diagnostic equipment.

This unit applies to the work of a Marine Engineer Class 2 on commercial vessels greater than 3000 kW and forms part of the requirements for the Certificate of Competency Marine Engineer Class 2 issued by the Australian Maritime Safety Authority (AMSA).

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Evaluate diesel fuel systems

1.1

Why atomisation and penetration of fuel and air turbulence are essential to optimum combustion is explained

1.2

Typical injection pressures and viscosities for different grades of fuel are documented and compared

1.3

Design modifications of pumps, camshafts and injectors for fuel types are outlined

1.4

Difference between constant and variable injection fuel pump timing, showing materials, principal parts, method of operation and adjustments of common pump types is compared and explained

1.5

Injection requirements for slow speed and high speed diesel engines are compared, including pilot injection and pre-combustion chambers

1.6

Common service faults, symptoms and causes of diesel fuel injection problems are identified, specifying appropriate adjustments, including methods of fuel pump timing

1.7

Work health and safety/occupational health and safety (WHS/OHS) requirements for handling and testing fuel injection systems are explained

1.8

Normal operating pressures and temperatures for fuel valve cooling arrangements, and uni-fuel and dual-fuel systems, including both high/medium viscosity fuel types are explained

2

Evaluate different methods of diesel engine cooling

2.1

Importance of maintaining diesel engine thermal efficiency and evaluate thermal loads on engine components is outlined

2.2

Cooling media selection is justified, and advantages and disadvantages of different diesel cooling methods are outlined

2.3

Appropriate action to be taken with common faults in cooling systems is explained and different cooling water treatments are compared

2.4

How cooling systems are commissioned, stored during idle periods and restored after contamination is confirmed

2.5

Methods of load-dependent cooling of diesel alternators on heavy fuels are evaluated

2.6

Normal operation temperatures, pressures, and methods of cooling medium and slow speed diesel engine pistons, exhaust valves, cylinders, turbochargers and cylinder heads are identified

3

Evaluate diesel engine lubrication requirements

3.1

Principles of engine lubrication are outlined

3.2

Lubricant types, physical and chemical properties and applications are assessed

3.3

Sources of diesel lubricant contamination and deterioration are identified

3.4

Ways of testing for diesel lubricant contamination and deterioration, interpreting test results and identifying appropriate action to be taken are outlined

3.5

Distribution of lubricating oil to guides, top-end, bottom-end and main bearings of diesel engines, showing direction of flow, typical clearances and stating normal operating temperatures and pressure is explained

3.6

Principles of bearing lubrication are outlined

3.7

Materials used in bearing construction are identified

3.8

Bearing faults are evaluated and remedies to prevent them from occurring are determined

4

Compare different propulsion, manoeuvring and starting methods

4.1

Starting procedures of diesel engines for power generation, propulsion, and emergency use are clarified

4.2

Starting and manoeuvring requirements/sequences for direct-coupled reversible and geared propulsion diesels, including CPP applications are explained

4.3

Common faults are analysed and appropriate action to be taken with typical diesel starting and manoeuvring systems is identified

4.4

Manoeuvring and reversing systems of propulsion diesel engines are outlined

4.5

Different methods of achieving reversing capability with direct-coupled propulsion diesels are compared

4.6

Layout of a diesel-electric drive is compared and contrasted with the layout of a turbo electric drive

5

Analyse materials used in constructing diesel engines

5.1

Common materials used in diesel engine construction are assessed, selection is justified, and typical compositions and physical properties of components are specified

5.2

Dynamic stresses and loads are interpreted, service limitations are identified and different methods of component fabrication are evaluated

5.3

Two-stroke and four-stroke operating cycle forces, couples and moments, relating to design principles of crankshafts, bedplates, foundations and crossheads are outlined

5.4

Out-of-balance gas and inertia forces, couples and moments are related to flywheels, balance weights and first/second order balancing

5.5

Factors contributing to torsional vibration are explained and methods of minimising or eliminating harmful effects of critical speeds are clarified

5.6

Pistons, liners, piston rings, bearings and crankshafts are calibrated to identify wear patterns, limits and means of correction

5.7

Alignment and adjustment criteria of crankshafts, chain-drives, integral thrust bearings and crossheads are specified

5.8

Specified working clearances and limits of all bearings, sliding surfaces and interference fits of typical diesel engines are compiled using engine builder manuals

6

Explain uptake and scavenge fires and air line, gearbox and crankcase explosions

6.1

Design and operational factors that contribute to fires in waste heat units are explained and methods of extinguishing and/or containing soot and hydrogen fires are specified

6.2

Routine cleaning procedures, inspection criteria, symptoms of fire and risks of isolation in service associated with waste heat units are identified

6.3

Operational factors that contribute to scavenge fires are identified, symptoms are outlined, methods of extinguishing are evaluated and routine inspection criteria of scavenge spaces are stated

6.4

Principles of explosive mixtures are clarified and how a starting airline explosion can occur is explained

6.5

How risk of scavenge fires may be minimised in service by protective devices and routine evaluation of starting air systems is clarified

6.6

Causes of gearbox and crankcase explosions in propulsion and auxiliary drives are outlined

6.7

How risks of gearbox and crankcase explosions may be minimised in service are explained and correct procedures to be taken in the event of warning of a hazardous atmosphere in both oil and dual-fuel engines are clarified

6.8

Operating principles of an oil-mist detector, crankcase breather and explosion relief doors are explained

6.9

Function of a piston rod scraper box is outlined, and causes of wear and appropriate adjustments are identified

7

Explain correct working practices associated with diesel engine operation, maintenance and repair

7.1

Safe working practices associated with isolating main and propulsion diesels under all emergency and routine situations are explained, including use of protective devices, interlocks and evaluation of their status

7.2

Safe working practices associated with working in crankcases and other enclosed spaces are explained

7.3

Safe working practices associated with safe handling of hydraulic tools and dangers of lifting/isolating heavy components both unaided and with lifting gear are explained

7.4

Hazards of working with flammable liquids under pressure, chemicals, acids and hydrocarbons as well as selection criteria for appropriate protective clothing are explained

7.5

Safe working strategies for diesel engine maintenance are planned using engine manufacturer instruction manuals and product data safety sheets

8

Analyse faults using combustion diagnostic equipment

8.1

Two-stroke and four-stroke theoretical cycle diagrams are compared with results recorded using diagnostic tools

8.2

Combustion faults from typical diagrams are evaluated and corrective adjustments are specified

8.3

Service combustion values are compared with trials or test bed figures

8.4

Common faults associated with pressure charging and fuel injection systems are outlined

8.5

Methods of pressure charging diesel engines are compared, and materials of construction, design features, operational maintenance and emergency procedures are correctly identified

8.6

Causes of efficiency loss and surge are explained

8.7

Scavenging systems and gas/air flow paths through a turbocharger, under normal and emergency operation modes are explained using relevant diagrams

9

Analyse construction and operation of marine gas turbines

9.1

Flow of air and gas through a simple cycle marine gas turbine is analysed

9.2

Materials and construction of compressor, combustion system and turbine in single and two shaft designs are outlined

9.3

Controls required for control and protection of marine gas turbines are detailed

9.4

Function of accessories necessary for safe operation of marine gas turbines are explained

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

accessing diagnostic information related to marine diesel engines and systems

applying relevant work health and safety/occupational health and safety (WHS/OHS) requirements and work practices

assessing own work outcomes and maintaining knowledge of current codes, standards, regulations and industry practices

explaining operation of marine diesel engines and systems

identifying and applying relevant solutions for addressing problems associated with marine diesel engines and systems

identifying and interpreting diagnostic information, and performing mathematical calculations related to operating, maintaining and repairing marine diesel engines and systems

identifying methods, procedures and materials needed for operating, maintaining and repairing marine diesel engines and systems

imparting knowledge and ideas through verbal, written and visual means

reading and interpreting manuals, technical specifications, safety data sheets/material safety data sheets and manufacturer guides related to operating, maintaining and repairing marine diesel engines and systems.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

chemical and physical properties of fuels and lubricants

components of diesel engines

crankcase and air-line explosions, scavenge and uptake fires

diesel engine lubrication systems

diesel engine propulsion and power generation

manoeuvring systems of diesel engines

pressure charging diesel engines, including common service faults, actions to rectify faults, emergency operation and isolation procedures

principles of diesel engine operation

properties and characteristics of fires

safe working practices associated with diesel engines during operation, repair and maintenance

starting methods of diesel engines

WHS/OHS legislation, policies and procedures.

Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Assessment must satisfy the National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) standards.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations or where these are not available, in simulated workplace operational situations or an industry-approved marine operations site that replicates workplace conditions where intermediate knowledge of marine diesel engines and systems can be demonstrated.

Resources for assessment include access to:

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

diagrams, specifications and other information required for performing basic calculations related to marine diesel engines and systems

technical reference library with current publications on marine diesel engines and systems

tools, equipment, materials and personal protective equipment currently used in industry.

Performance should be demonstrated consistently over time and in a suitable range of contexts.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Evaluate diesel fuel systems

1.1

Why atomisation and penetration of fuel and air turbulence are essential to optimum combustion is explained

1.2

Typical injection pressures and viscosities for different grades of fuel are documented and compared

1.3

Design modifications of pumps, camshafts and injectors for fuel types are outlined

1.4

Difference between constant and variable injection fuel pump timing, showing materials, principal parts, method of operation and adjustments of common pump types is compared and explained

1.5

Injection requirements for slow speed and high speed diesel engines are compared, including pilot injection and pre-combustion chambers

1.6

Common service faults, symptoms and causes of diesel fuel injection problems are identified, specifying appropriate adjustments, including methods of fuel pump timing

1.7

Work health and safety/occupational health and safety (WHS/OHS) requirements for handling and testing fuel injection systems are explained

1.8

Normal operating pressures and temperatures for fuel valve cooling arrangements, and uni-fuel and dual-fuel systems, including both high/medium viscosity fuel types are explained

2

Evaluate different methods of diesel engine cooling

2.1

Importance of maintaining diesel engine thermal efficiency and evaluate thermal loads on engine components is outlined

2.2

Cooling media selection is justified, and advantages and disadvantages of different diesel cooling methods are outlined

2.3

Appropriate action to be taken with common faults in cooling systems is explained and different cooling water treatments are compared

2.4

How cooling systems are commissioned, stored during idle periods and restored after contamination is confirmed

2.5

Methods of load-dependent cooling of diesel alternators on heavy fuels are evaluated

2.6

Normal operation temperatures, pressures, and methods of cooling medium and slow speed diesel engine pistons, exhaust valves, cylinders, turbochargers and cylinder heads are identified

3

Evaluate diesel engine lubrication requirements

3.1

Principles of engine lubrication are outlined

3.2

Lubricant types, physical and chemical properties and applications are assessed

3.3

Sources of diesel lubricant contamination and deterioration are identified

3.4

Ways of testing for diesel lubricant contamination and deterioration, interpreting test results and identifying appropriate action to be taken are outlined

3.5

Distribution of lubricating oil to guides, top-end, bottom-end and main bearings of diesel engines, showing direction of flow, typical clearances and stating normal operating temperatures and pressure is explained

3.6

Principles of bearing lubrication are outlined

3.7

Materials used in bearing construction are identified

3.8

Bearing faults are evaluated and remedies to prevent them from occurring are determined

4

Compare different propulsion, manoeuvring and starting methods

4.1

Starting procedures of diesel engines for power generation, propulsion, and emergency use are clarified

4.2

Starting and manoeuvring requirements/sequences for direct-coupled reversible and geared propulsion diesels, including CPP applications are explained

4.3

Common faults are analysed and appropriate action to be taken with typical diesel starting and manoeuvring systems is identified

4.4

Manoeuvring and reversing systems of propulsion diesel engines are outlined

4.5

Different methods of achieving reversing capability with direct-coupled propulsion diesels are compared

4.6

Layout of a diesel-electric drive is compared and contrasted with the layout of a turbo electric drive

5

Analyse materials used in constructing diesel engines

5.1

Common materials used in diesel engine construction are assessed, selection is justified, and typical compositions and physical properties of components are specified

5.2

Dynamic stresses and loads are interpreted, service limitations are identified and different methods of component fabrication are evaluated

5.3

Two-stroke and four-stroke operating cycle forces, couples and moments, relating to design principles of crankshafts, bedplates, foundations and crossheads are outlined

5.4

Out-of-balance gas and inertia forces, couples and moments are related to flywheels, balance weights and first/second order balancing

5.5

Factors contributing to torsional vibration are explained and methods of minimising or eliminating harmful effects of critical speeds are clarified

5.6

Pistons, liners, piston rings, bearings and crankshafts are calibrated to identify wear patterns, limits and means of correction

5.7

Alignment and adjustment criteria of crankshafts, chain-drives, integral thrust bearings and crossheads are specified

5.8

Specified working clearances and limits of all bearings, sliding surfaces and interference fits of typical diesel engines are compiled using engine builder manuals

6

Explain uptake and scavenge fires and air line, gearbox and crankcase explosions

6.1

Design and operational factors that contribute to fires in waste heat units are explained and methods of extinguishing and/or containing soot and hydrogen fires are specified

6.2

Routine cleaning procedures, inspection criteria, symptoms of fire and risks of isolation in service associated with waste heat units are identified

6.3

Operational factors that contribute to scavenge fires are identified, symptoms are outlined, methods of extinguishing are evaluated and routine inspection criteria of scavenge spaces are stated

6.4

Principles of explosive mixtures are clarified and how a starting airline explosion can occur is explained

6.5

How risk of scavenge fires may be minimised in service by protective devices and routine evaluation of starting air systems is clarified

6.6

Causes of gearbox and crankcase explosions in propulsion and auxiliary drives are outlined

6.7

How risks of gearbox and crankcase explosions may be minimised in service are explained and correct procedures to be taken in the event of warning of a hazardous atmosphere in both oil and dual-fuel engines are clarified

6.8

Operating principles of an oil-mist detector, crankcase breather and explosion relief doors are explained

6.9

Function of a piston rod scraper box is outlined, and causes of wear and appropriate adjustments are identified

7

Explain correct working practices associated with diesel engine operation, maintenance and repair

7.1

Safe working practices associated with isolating main and propulsion diesels under all emergency and routine situations are explained, including use of protective devices, interlocks and evaluation of their status

7.2

Safe working practices associated with working in crankcases and other enclosed spaces are explained

7.3

Safe working practices associated with safe handling of hydraulic tools and dangers of lifting/isolating heavy components both unaided and with lifting gear are explained

7.4

Hazards of working with flammable liquids under pressure, chemicals, acids and hydrocarbons as well as selection criteria for appropriate protective clothing are explained

7.5

Safe working strategies for diesel engine maintenance are planned using engine manufacturer instruction manuals and product data safety sheets

8

Analyse faults using combustion diagnostic equipment

8.1

Two-stroke and four-stroke theoretical cycle diagrams are compared with results recorded using diagnostic tools

8.2

Combustion faults from typical diagrams are evaluated and corrective adjustments are specified

8.3

Service combustion values are compared with trials or test bed figures

8.4

Common faults associated with pressure charging and fuel injection systems are outlined

8.5

Methods of pressure charging diesel engines are compared, and materials of construction, design features, operational maintenance and emergency procedures are correctly identified

8.6

Causes of efficiency loss and surge are explained

8.7

Scavenging systems and gas/air flow paths through a turbocharger, under normal and emergency operation modes are explained using relevant diagrams

9

Analyse construction and operation of marine gas turbines

9.1

Flow of air and gas through a simple cycle marine gas turbine is analysed

9.2

Materials and construction of compressor, combustion system and turbine in single and two shaft designs are outlined

9.3

Controls required for control and protection of marine gas turbines are detailed

9.4

Function of accessories necessary for safe operation of marine gas turbines are explained

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Methods of component fabrication include one or more of the following:

ceramics

composite

forged

laser-hardening

plasma-spraying

welded

Accessories include one or more of the following:

accessory gear

lube oil:

cooler

pump

filter

starting devices

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

accessing diagnostic information related to marine diesel engines and systems

applying relevant work health and safety/occupational health and safety (WHS/OHS) requirements and work practices

assessing own work outcomes and maintaining knowledge of current codes, standards, regulations and industry practices

explaining operation of marine diesel engines and systems

identifying and applying relevant solutions for addressing problems associated with marine diesel engines and systems

identifying and interpreting diagnostic information, and performing mathematical calculations related to operating, maintaining and repairing marine diesel engines and systems

identifying methods, procedures and materials needed for operating, maintaining and repairing marine diesel engines and systems

imparting knowledge and ideas through verbal, written and visual means

reading and interpreting manuals, technical specifications, safety data sheets/material safety data sheets and manufacturer guides related to operating, maintaining and repairing marine diesel engines and systems.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

chemical and physical properties of fuels and lubricants

components of diesel engines

crankcase and air-line explosions, scavenge and uptake fires

diesel engine lubrication systems

diesel engine propulsion and power generation

manoeuvring systems of diesel engines

pressure charging diesel engines, including common service faults, actions to rectify faults, emergency operation and isolation procedures

principles of diesel engine operation

properties and characteristics of fires

safe working practices associated with diesel engines during operation, repair and maintenance

starting methods of diesel engines

WHS/OHS legislation, policies and procedures.

Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Assessment must satisfy the National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) standards.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations or where these are not available, in simulated workplace operational situations or an industry-approved marine operations site that replicates workplace conditions where intermediate knowledge of marine diesel engines and systems can be demonstrated.

Resources for assessment include access to:

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

diagrams, specifications and other information required for performing basic calculations related to marine diesel engines and systems

technical reference library with current publications on marine diesel engines and systems

tools, equipment, materials and personal protective equipment currently used in industry.

Performance should be demonstrated consistently over time and in a suitable range of contexts.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Why atomisation and penetration of fuel and air turbulence are essential to optimum combustion is explained 
Typical injection pressures and viscosities for different grades of fuel are documented and compared 
Design modifications of pumps, camshafts and injectors for fuel types are outlined 
Difference between constant and variable injection fuel pump timing, showing materials, principal parts, method of operation and adjustments of common pump types is compared and explained 
Injection requirements for slow speed and high speed diesel engines are compared, including pilot injection and pre-combustion chambers 
Common service faults, symptoms and causes of diesel fuel injection problems are identified, specifying appropriate adjustments, including methods of fuel pump timing 
Work health and safety/occupational health and safety (WHS/OHS) requirements for handling and testing fuel injection systems are explained 
Normal operating pressures and temperatures for fuel valve cooling arrangements, and uni-fuel and dual-fuel systems, including both high/medium viscosity fuel types are explained 
Importance of maintaining diesel engine thermal efficiency and evaluate thermal loads on engine components is outlined 
Cooling media selection is justified, and advantages and disadvantages of different diesel cooling methods are outlined 
Appropriate action to be taken with common faults in cooling systems is explained and different cooling water treatments are compared 
How cooling systems are commissioned, stored during idle periods and restored after contamination is confirmed 
Methods of load-dependent cooling of diesel alternators on heavy fuels are evaluated 
Normal operation temperatures, pressures, and methods of cooling medium and slow speed diesel engine pistons, exhaust valves, cylinders, turbochargers and cylinder heads are identified 
Principles of engine lubrication are outlined 
Lubricant types, physical and chemical properties and applications are assessed 
Sources of diesel lubricant contamination and deterioration are identified 
Ways of testing for diesel lubricant contamination and deterioration, interpreting test results and identifying appropriate action to be taken are outlined 
Distribution of lubricating oil to guides, top-end, bottom-end and main bearings of diesel engines, showing direction of flow, typical clearances and stating normal operating temperatures and pressure is explained 
Principles of bearing lubrication are outlined 
Materials used in bearing construction are identified 
Bearing faults are evaluated and remedies to prevent them from occurring are determined 
Starting procedures of diesel engines for power generation, propulsion, and emergency use are clarified 
Starting and manoeuvring requirements/sequences for direct-coupled reversible and geared propulsion diesels, including CPP applications are explained 
Common faults are analysed and appropriate action to be taken with typical diesel starting and manoeuvring systems is identified 
Manoeuvring and reversing systems of propulsion diesel engines are outlined 
Different methods of achieving reversing capability with direct-coupled propulsion diesels are compared 
Layout of a diesel-electric drive is compared and contrasted with the layout of a turbo electric drive 
Common materials used in diesel engine construction are assessed, selection is justified, and typical compositions and physical properties of components are specified 
Dynamic stresses and loads are interpreted, service limitations are identified and different methods of component fabrication are evaluated 
Two-stroke and four-stroke operating cycle forces, couples and moments, relating to design principles of crankshafts, bedplates, foundations and crossheads are outlined 
Out-of-balance gas and inertia forces, couples and moments are related to flywheels, balance weights and first/second order balancing 
Factors contributing to torsional vibration are explained and methods of minimising or eliminating harmful effects of critical speeds are clarified 
Pistons, liners, piston rings, bearings and crankshafts are calibrated to identify wear patterns, limits and means of correction 
Alignment and adjustment criteria of crankshafts, chain-drives, integral thrust bearings and crossheads are specified 
Specified working clearances and limits of all bearings, sliding surfaces and interference fits of typical diesel engines are compiled using engine builder manuals 
Design and operational factors that contribute to fires in waste heat units are explained and methods of extinguishing and/or containing soot and hydrogen fires are specified 
Routine cleaning procedures, inspection criteria, symptoms of fire and risks of isolation in service associated with waste heat units are identified 
Operational factors that contribute to scavenge fires are identified, symptoms are outlined, methods of extinguishing are evaluated and routine inspection criteria of scavenge spaces are stated 
Principles of explosive mixtures are clarified and how a starting airline explosion can occur is explained 
How risk of scavenge fires may be minimised in service by protective devices and routine evaluation of starting air systems is clarified 
Causes of gearbox and crankcase explosions in propulsion and auxiliary drives are outlined 
How risks of gearbox and crankcase explosions may be minimised in service are explained and correct procedures to be taken in the event of warning of a hazardous atmosphere in both oil and dual-fuel engines are clarified 
Operating principles of an oil-mist detector, crankcase breather and explosion relief doors are explained 
Function of a piston rod scraper box is outlined, and causes of wear and appropriate adjustments are identified 
Safe working practices associated with isolating main and propulsion diesels under all emergency and routine situations are explained, including use of protective devices, interlocks and evaluation of their status 
Safe working practices associated with working in crankcases and other enclosed spaces are explained 
Safe working practices associated with safe handling of hydraulic tools and dangers of lifting/isolating heavy components both unaided and with lifting gear are explained 
Hazards of working with flammable liquids under pressure, chemicals, acids and hydrocarbons as well as selection criteria for appropriate protective clothing are explained 
Safe working strategies for diesel engine maintenance are planned using engine manufacturer instruction manuals and product data safety sheets 
Two-stroke and four-stroke theoretical cycle diagrams are compared with results recorded using diagnostic tools 
Combustion faults from typical diagrams are evaluated and corrective adjustments are specified 
Service combustion values are compared with trials or test bed figures 
Common faults associated with pressure charging and fuel injection systems are outlined 
Methods of pressure charging diesel engines are compared, and materials of construction, design features, operational maintenance and emergency procedures are correctly identified 
Causes of efficiency loss and surge are explained 
Scavenging systems and gas/air flow paths through a turbocharger, under normal and emergency operation modes are explained using relevant diagrams 
Flow of air and gas through a simple cycle marine gas turbine is analysed 
Materials and construction of compressor, combustion system and turbine in single and two shaft designs are outlined 
Controls required for control and protection of marine gas turbines are detailed 
Function of accessories necessary for safe operation of marine gas turbines are explained 

Forms

Assessment Cover Sheet

MARL027 - Demonstrate intermediate knowledge of marine diesel engines and systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MARL027 - Demonstrate intermediate knowledge of marine diesel engines and systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: