List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Inspect ILS and components | 1.1 | Relevant maintenance documentation and modification status, including system defect reports, where relevant, are used to identify specific inspection requirements |
| | 1.2 | Isolation tags are checked and aircraft configured for safe system inspection and operation in accordance with the applicable maintenance manual |
| | 1.3 | ILS components are visually or physically checked for external signs of defects in accordance with applicable maintenance manual while observing all relevant work health and safety (WHS) requirements |
| | 1.4 | Defects are correctly identified and reported |
2. | Test/adjust ILS and components | 2.1 | Aircraft and system are prepared in accordance with applicable maintenance manual for the application of power/system operation |
| | 2.2 | ILS is functionally tested in accordance with maintenance manual for evidence of serviceability or malfunction |
| | 2.3 | System calibration or adjustments are performed in accordance with maintenance manual, as appropriate |
3. | Troubleshoot ILS | 3.1 | Available information from maintenance documentation, inspection and test results is used, where necessary, to assist in fault determination |
| | 3.2 | Maintenance manual fault diagnosis guides and logic processes are used to ensure efficient and accurate troubleshooting to line replacement level |
| | 3.3 | Specialist advice is obtained, where required, to assist with the troubleshooting process |
| | 3.4 | ILS faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required, in accordance with standard enterprise procedures |
| | 3.5 | Rectification requirements are determined |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
applying relevant WHS practices
using approved maintenance documentation and aircraft publications relating to the ILS being maintained
recognition of system and component defects/external damage, correct installation, attaching hardware (including cabling/harnesses/transmission lines) and security in ILS
applying logic processes, taking and interpreting system measurements to accurately and effectively isolate malfunctions within the system
performing system testing to isolate system faults and assess post maintenance serviceability.
It is essential that system testing procedures, cleanliness requirements and safety precautions applicable to the ILS being maintained are fully observed, understood and complied with. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice across a range of inspection, testing and troubleshooting applications (including the timely involvement of supervisors or other trades) is critical.
Evidence of transferability of skills and knowledge related to inspection, testing and troubleshooting is essential. This is to be demonstrated through application across a range of ILS systems and components.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
component attachment methods
the basic layout (block diagram level), function and operation of the system
integration with other avionic systems
the location and operation of ground:
marker beacons
localiser transmitter
glideslope transmitter
ILS maintenance requirements and troubleshooting procedures
relevant WHS practices
basic principles/functions relating to the system and associated with:
electromagnetic radiation and propagation
basic alternating current (AC) and direct current (DC) circuit theory
digital fundamentals
analogue fundamentals
transmitter and receiver principles
antenna characteristics
transmission line characteristics
relevant maintenance manuals
relevant regulatory requirements and standard procedures.
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in the maintenance manuals. It is also expected that applicable general and special purpose tools, and test and ground support equipment would be used where appropriate.
The application of testing procedures should clearly indicate knowledge of system operation, the relationship of individual components and the links with other systems (if applicable) within the limits of the aircraft/system fault finding guide before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved under routine supervision on an ILS system and at least one (1) major system component/line replaceable unit (LRU). This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.