Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
applying all relevant WHS practices, including the use of MSDS and PPE
using maintenance manuals and documentation to prepare the aircraft and identify requirements for inspection of hydraulic, fuel, gaseous, flight control, landing gear and mechanical systems and components
using hand skills and tools in the inspection of hydraulic, fuel, flight control, gaseous and mechanical system components
jacking of the aircraft, as required, for landing gear system inspection
using hand skills and tools in the inspection of landing gear components
recognising external defects in hydraulic, fuel, gaseous, flight control, landing gear and mechanical systems and components.
The underlying skills inherent in this unit should be transferable across a range of inspection applications (including the timely involvement of supervisors or other trades) associated with aircraft hydro-mechanical, gaseous, mechanical and landing gear systems and their components. It is essential that system/component inspection procedures take into account all safety precautions applicable to the system being maintained, especially where system operation/switching interrelates to other systems being maintained. Ability to interpret system performance specifications (allowable limits) and apply them in practice is critical and shall be demonstrated through application across the range of systems listed in the Assessment Conditions.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
how to recognise external defects in hydraulic, fuel, gaseous, flight control, landing gear and mechanical system components
how to configure the aircraft for inspection of hydraulic, fuel, gaseous, flight control, landing gear and mechanical systems and components
inspection and testing requirements for gears, springs and bearings
standard trade practices relating to tool usage and installation/securing of aircraft hardware
maintenance requirements
relevant WHS practices relating to hydraulic, fuel, gaseous, flight control, landing gear and mechanical system components, including lifting and handling of heavy items
how to obtain MSDS
selection and use of PPE
maintenance requirements
relevant maintenance manuals
relevant regulatory requirements and standard procedures.
Competency should be assessed in the work environment or simulated work environment, using procedures, tools and equipment specified in maintenance documentation. It is also expected that applicable general-purpose tools, test and ground support equipment found in most routine situations would be used where appropriate.
The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of this unit of competency are being achieved under routine supervision on each type of system and on at least one (1) component of each group listed in the Range of Conditions, as follows:
hydraulic systems – a system and at least one (1) component from each of the following groups:
hydraulic accumulators, filters, reservoirs, valves, pumps, motors, actuators, regulators and direct reading gauges
rigid and flexible pipelines, hoses and fittings
fuel systems – a system and at least one (1) component from each of the following groups:
fuel system filters, valves, pumps, and rigid and flexible storage cells/tanks
rigid and flexible pipelines, hoses and fittings
landing gear systems – each system:
retraction systems
steering systems
brake systems, including anti-skid, where applicable
landing gear components – one (1) each of:
wheel assemblies
brake units
struts/oleos
gaseous systems – each listed system:
pneumatic
air cycle air conditioning
pressurisation
fire-extinguishing
gaseous system components - at least one (1) component from each of the following groups:
gauges (direct reading), temperature sensors, pressurisation controllers and temperature controllers
heat exchangers, pressure vessels, condensers, compressors, expansion turbines, humidifiers, valves and actuators
rigid and flexible pipelines and fittings
ducting
mechanical systems – a system applicable to each of system types:
mechanical operating and locking systems
mechanical flight control systems or the mechanical elements of power-assisted flight control systems
mechanical system components - at least one (1) component from each of the following groups:
cables, pulleys, guides, fairleads, tension regulators, chains and sprockets
control rods, torque tubes, bellcranks, screwjacks, clutches, springs, bearings and gears
control sticks, wheels, columns, trim wheels or handles, and rudder pedals.
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.
Individuals being assessed who have already attained the following related units will have met the Performance Criteria and Range of Conditions variables for Elements listed:
MEA309 Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components, for Element 1
MEA309 Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components, for Element 2, provided that the unit was attained on aircraft with retractable landing gear
MEA310 Inspect, test and troubleshoot aircraft pneumatic systems and components, for Element 3
MEA312 Inspect, test and troubleshoot aircraft fixed wing flight control systems and components, for Element 4.
The Log of Industrial Experience and Achievement records relating to the listed units may be accepted as also meeting the evidence requirements for this unit in the applicable Elements. Advice in MEA310 Inspect, test and troubleshoot aircraft pneumatic systems and components regarding MEA355 Maintain light aircraft air cycle air conditioning systems, and MEA356 Maintain light piston engine aircraft pressurisation systems, may also be taken into consideration where applicable.