List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Inspect gas turbine engine systems and components | 1.1 | Isolation tags already attached to the system or related systems are checked and aircraft configured for safe system inspection and operation in accordance with applicable maintenance manual |
| | 1.2 | Gas turbine engine and/or components are visually or physically checked for external signs of defects in accordance with the applicable maintenance manual while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE) |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
applying relevant WHS procedures, including lifting and handling of heavy components
using MSDS and PPE
using relevant maintenance documentation and aircraft manuals to:
recognise through visual/physical inspection external and internal signs of defects/damage to gas turbine engine, components and system components
assist with testing of gas turbine engine and engine system operation.
The underlying skills inherent in this unit should be transferable across a range of inspection applications (including the timely involvement of supervisors or other trades) associated with gas turbine engines, components and systems. It is essential that inspection procedures take into account all safety precautions applicable to the system/component being maintained. Ability to interpret system performance specifications (allowable limits) and apply them in practice is critical and shall be demonstrated through application across the range of systems listed in the Assessment Conditions.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
gas turbine engine layout and operation:
intakes
compressors
combustion chambers
turbines
exhaust
thrust reversers
accessory drives
bearings and seals
maintenance requirements
system and component operation, including electrical and instrument system interfaces:
fuel control and fuels
lubrication and lubricants
air distribution
starting
ignition
power augmentation
instrumentation:
performance indication
condition indication
warning
presentation and interpretation of electronic displays
fire warning and extinguishing
control system
engine spin/run procedures, including the operation of auxiliary power units (APUs)
engine condition monitoring
relevant WHS practices, including the requirements for the lifting and handling of heavy components
how to obtain MSDS
selection and use of PPE
maintenance requirements
relevant maintenance manuals
relevant regulatory requirements and standard procedures.
Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in maintenance manuals. It is also expected that applicable general-purpose tools, test and ground support equipment found in most routine situations and used to assist in the inspection process would be used where appropriate.
The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved under routine supervision on each of the following systems and at least one (1) component of each system.
engine change unit, main components and accessories/drives
control system and major system components
ignition and starter systems and major system components
engine fuel system and major system components
oil system and major system components
air system and major system components.
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.
Individuals being assessed who have already attained MEA314 Inspect, test and troubleshoot gas turbine engine systems and components, will have fully met the criteria for this unit. Log of Industrial Experience and Achievement records relating to MEA314 Inspect, test and troubleshoot gas turbine engine systems and components may be accepted as also meeting the evidence requirements for this unit.