List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Maintain and/or repair mechanical components or parts | 1.1 | Maintenance and/or repair requirements are determined, following disassembly and assessment of component parts for serviceability, in accordance with the relevant maintenance documentation |
| | 1.2 | Tagging and repair instructions are accurately specified for parts requiring specialist repair |
| | 1.3 | Appropriate materials, tools, equipment and assembly or fabrication jigs are selected and prepared for the particular specification requirements |
| | 1.4 | Components or parts are maintained, repaired or modified, as approved by relevant manufacturers’ bulletins or procedures, in accordance with required specifications while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE) |
| | 1.5 | Mechanical component parts are assembled within specified tolerances and in accordance with the appropriate maintenance documents |
| | 1.6 | Mechanical components are adjusted, as required, to operate within prescribed specifications |
| | 1.7 | Test equipment and rigs are used, where applicable, to confirm serviceability |
| | 1.8 | Maintained/repaired or modified components are tagged, sealed and packaged within specified procedures |
| | 1.9 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
applying relevant WHS practices, including the use of MSDS and PPE
using relevant maintenance documentation, specifications and aircraft/component manuals to:
recognise state of serviceability and repair requirements for the range of mechanical components listed in the Range of Conditions
identify requirements and complete repairs and/or modifications
test and/or adjust components, as required.
correctly tag, seal and package completed components
The underlying skills inherent in this unit should be transferable across a range of maintenance and repair applications associated with aircraft components. It is essential that the relevant procedures are interpreted and applied to ensure quality and safety standards are achieved.
This shall be demonstrated through application across a number of different aircraft components as listed in the Assessment Conditions.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
construction, repair procedures and processes for:
cables
pulleys
chains
sprockets
gear drives
control rods
bellcranks
linkages
non-structural removable components of fuselages, fairings, nacelles, empennage and wings
engine thrust reversers
from unpressurised aircraft:
entry, cargo and access doors
windows
transparent panels
construction and serviceability criteria for hoses and pipes, including pressure test requirements
construction, materials, cleaning and repair requirements for:
trim panels
cabin linings
seats
cabin equipment and consoles
floor panels
coverings
emergency equipment and stowages
cargo, crew and/or passenger seat restraints
relevant WHS practices
how to obtain MSDS
use of PPE
relevant maintenance manuals, standards and specifications
relevant regulatory requirements and standard procedures.
Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in maintenance documentation. It is also expected that applicable general and special-purpose tools and test equipment found in most routine situations would be used where appropriate.
Ability to assess component serviceability and interpret parts requirements will be necessary before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved under routine supervision on a representative range of components or parts from each of the following groups:
hoses
pipes
cables, pulleys, chains, sprockets and gear drives
control rods, bellcranks and links
non-structural removable components of fuselages, fairings, nacelles, empennage, wings and thrust reversers. for non-pressurised aircraft – entry, cargo, access doors and associated seals, windows and transparent panels
trim panels, linings, seats, cabin equipment and consoles, floor panels, coverings and emergency equipment (including passenger escape systems, inflatable slides, life jackets, rafts, location transmitters, beacons, and cargo, crew and/or passenger seat restraints.
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.
Individuals being assessed who have already attained MEA327 Fabricate and/or repair aircraft mechanical components or parts will have partially met the performance criteria for Element 1 for some of the listed variables. The Log of Industrial Experience and Achievement records relating to MEA327 Fabricate and/or repair aircraft mechanical components or parts may be accepted as also meeting the evidence requirements for the performance criteria for this Element in respect to common variables.