List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Inspect light aircraft air cycle air conditioning system | 1.1 | Relevant maintenance documentation and modification status, including system defect reports, where relevant, are used to identify specific inspection requirements |
| | 1.2 | Isolation tags are checked and aircraft configured for safe system inspection and operation in accordance with the applicable maintenance manual |
| | 1.3 | Air cycle air conditioning system components are visually or physically checked for external signs of defects in accordance with applicable maintenance manual while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE) |
| | 1.4 | Defects are correctly identified and reported |
2. | Test/adjust light aircraft air conditioning systems and components | 2.1 | Aircraft and system are prepared in accordance with applicable maintenance manual for the application of power/system operation |
| | 2.2 | Air cycle air conditioning system is functionally tested in accordance with maintenance manual for evidence of serviceability or malfunction |
| | 2.3 | System adjustment is performed in accordance with maintenance manual |
3. | Troubleshoot light aircraft air cycle air conditioning systems | 3.1 | Available information from maintenance documentation, inspection and test results is used, where necessary, to assist in fault determination |
| | 3.2 | Maintenance manual fault diagnosis guides and logic processes are used to ensure efficient and accurate troubleshooting to line replacement level |
| | 3.3 | Specialist advice is obtained, where required, to assist with the troubleshooting process |
| | 3.4 | Air cycle air conditioning system faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required, in accordance with standard enterprise procedures |
| | 3.5 | Rectification requirements are determined |
4. | Remove and install light aircraft air cycle air conditioning system components | 4.1 | System is rendered safe in accordance with the applicable maintenance manual and isolation tags are fitted, where necessary, to ensure personnel safety |
| | 4.2 | Air cycle air conditioning system component removal is carried out in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE |
| | 4.3 | Required maintenance documentation is accurately completed and correctly processed |
| | 4.4 | Removed components are tagged, sealed and packaged in accordance with specified procedures |
| | 4.5 | Components to be installed are checked to confirm correct part numbers, serviceability and modification status |
| | 4.6 | Installation is carried out in accordance with the applicable maintenance manual |
| | 4.7 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and include:
using hand skills, tools and test equipment in the testing, adjustment and troubleshooting of light aircraft air cycle air conditioning systems and components, including system component removal and installation
recognising air cycle air conditioning system and component defects/external damage, correct installation and security for the types of system components listed in the Range of Conditions
performing system functional tests and checks to isolate system faults and assess post-maintenance serviceability
effectively using maintenance documentation and relevant fault diagnosis guides in the troubleshooting process and for component removal and installation
applying standard procedures
observing all relevant WHS procedures including the use of PPE and MSDS.
The underlying skills inherent in this unit should be transferable across a range of inspection, testing and troubleshooting applications (including the timely involvement of supervisors or other trades) associated with light aircraft air cycle air conditioning systems and components. It is essential that relevant procedures, cleanliness requirements and safety precautions are fully observed, understood and complied with. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical.
This shall be demonstrated through application across air cycle air conditioning systems and components as listed in the Assessment Conditions.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
WHS precautions relevant to light aircraft air cycle air conditioning system maintenance and how to obtain PPE and MSDS
standard trade practices relating to tool and test equipment usage and installation/securing of system components
air cycle air conditioning system:
terminology
layout
operation, including component operation and construction
electrical temperature control system components
how to configure the aircraft for inspection, testing and troubleshooting of air cycle air conditioning systems and components
air cycle air conditioning maintenance requirements and troubleshooting
component attachment methods
connection hardware and couplings
relevant maintenance manuals
relevant regulatory requirements and standard procedures
maintenance requirements and troubleshooting procedures.
Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in maintenance documentation. It is also expected that applicable general-purpose tools and test equipment found in most routine situations would be used where appropriate.
The application of testing procedures should clearly indicate knowledge of system operation, the relationship of individual components and the links with other systems (if applicable) within the limits of the aircraft/system fault-finding guide before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of this unit of competency are being achieved under routine supervision on an air cycle air conditioning system and on a representative range of the following components:
valves and regulators
heat exchangers, water separators and humidifiers
expansion turbines
rigid and flexible pipelines, hoses and fittings
ducting
temperature sensors, temperature controllers, and electrical control circuit wiring/components.
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.